Liquid nucleating additives for improving thermal insulating properties and mechanical strength of polyisocyanurate foams

The effects of liquid-type nucleating silane additives on the cell structure, mechanical strength, and thermal insulating properties of the polyisocyanurate (PIR) foams have been studied. The PIR foams synthesized with hexamethyldisilazane (HMDS) as a silane additive showed the smaller average cell size and lower thermal conductivity than those of the PIR foams prepared with the hexamethyldisiloxane, dimethoxydimethylsilane, and hexadecyltrimethoxysilane. When HMDS was added, average cell size of the PIR foam was becoming smaller due to lower surface tension of the polyol solution, thereby the nucleation rate and number of bubbles produced were increased and then the cell size becomes smaller. The additives likely act as nucleating agents during the formation of PIR foams. The smaller cell size appears to be one of the major reasons for the improvement of thermal insulation properties and mechanical properties of the PIR foams. From the results of cell size, thermal conductivity, and mechanical strength of the PIR foams, it is suggested that the HMDS may be the efficient liquid-type additive for the reduction of cell size and improvement of the thermal insulation property of the PIR foams.     

A digit-serial multiplier for finite field GF(2/sup m/)

In this paper, an efficient digit-serial systolic array is proposed for multiplication in finite field GF(2/sup m/) using the standard basis representation. From the least significant bit first multiplication algorithm, we obtain a new dependence graph and design an efficient digit-serial systolic multiplier. If input data come in continuously, the proposed array can produce multiplication results at a rate of one every /spl lceil/m/L/spl rceil/ clock cycles, where L is the selected digit size. Analysis shows that the computational delay time of the proposed architecture is significantly less than the previously proposed digit-serial systolic multiplier. Furthermore, since the new architecture has the features of regularity, modularity, and unidirectional data flow, it is well suited to VLSI implementation.     

Effect of steaming,freezing, and re-steaming on the texture properties of non-glutinous rice cakes

The effects of steaming time (6, 8, and 10 min), freezing storage period, and re-steaming for thawing on the textural properties of non-glutinous rice cakes (baekseolgi) were investigated. As the steaming time increased, the rice cakes softened. In particular, the sample that was steamed for 10 min showed lower hardness than those steamed for shorter periods. A short period of steaming was insufficient for water bound to the surface of the starch granules to penetrate the granules in the dough. During the re-steaming process of the frozen non-glutinous rice cake samples, the retrogradation of starch and water syneresis contributed to the increased hardness of non-glutinous rice cakes.     

Supercritical fluid extraction of microcystins from cyanobacteria.

A new method for the fast extraction of microcystins RR and LR in cyanobacterium was developed using supercritical CO2. The microcystins were successfully extracted with aqueous methanol modified supercritical fluid (90% CO2, 9.0% methanol, 1.0% water). The method developed here has several advantages over solid-phase extraction sample preparation for the analysis of microcystins. Sample handling steps are minimized, thus reducing possible losses of analytes and saving analysis time. No organic solvent extractions are involved in this method, and no cleanup steps are employed.     

Derivation and verification of an aerosol dynamics expression for the below-cloud scavenging process using the moment method

An aerosol dynamics equation for the below-cloud scavenging process considering phoretic and electric charging effects in addition to the conventional mechanisms (the Brownian diffusion, interception, and impaction) is developed by using the moment method. Then, the dynamics of particle size distribution by the below-cloud scavenging process is calculated by using the developed equation and verified with the measurement data. The calculated particle size distribution changes are quite small compared to the measured changes. The calculated removal rate is smaller by 10^?2–10^?3 than the measured data when only the conventional mechanisms are considered. With the extended mechanisms, the scavenging coefficient increases upto 20 times, mainly for the particle size range of 0.1 μm<d_p<3.0 μm. However, the difference between the calculated and measured scavenging coefficient is still large, especially, for d_p<0.1 μm. Other possible scavenging mechanisms that might affect the below-cloud scavenging process such as coagulation and condensational growth of hygroscopic particles, turbulence, and updraft into cloud are discussed. It is recommended that further studies on wet scavenging process are needed.     

Use of novel chemical dipping method for the stability evaluation of an ultrathin TaN<Subscript>x</Subscript> barrier in Cu interconnects

When a dip test in buffered oxide etching chemicals is combined with narrow contact pattern, the test can be used as a simple barrier evaluation method, especially for predicting of IPVD (Ionized Physical Vapor Deposition) extendibility. In spite of the excellent coverage of IPVD TaN_x films the structural defect at the corner of the pattern could be the root cause of device degradation. The use of extremely thin IPVD TaN_x film of around 20 Å was limited by the contact of less than 0.2 μm and an AR (Aspect Ratio) value greater than 4:1.     

Design of Scannable Non‐uniform Planar Array Structure for Maximum Side‐Lobe Reduction

In this letter, we propose a novel design scheme for an optimal non‐uniform planar array geometry in view of maximum side‐lobe reduction. This is implemented by a thinned array using a genetic algorithm. We show that the proposed method can maintain a low side‐lobe level without pattern distortion during beam steering.     

CT dosimetry computer codes: their influence on radiation dose estimates and the necessity for their revision under new ICRP radiation protection standards

Computed tomography (CT) dosimetry computer codes have been most commonly used due to their user friendliness, but with little consideration for potential uncertainty in estimated organ dose and their underlying limitations. Generally, radiation doses calculated with different CT dosimetry computer codes were comparable, although relatively large differences were observed for some specific organs or tissues. The largest difference in radiation doses calculated using different computer codes was observed for Siemens Sensation CT scanners. Radiation doses varied with patient age and sex. Younger patients and adult females receive a higher radiation dose in general than adult males for the same CT technique factors. There are a number of limitations of current CT dosimetry computer codes. These include unrealistic modelling of the human anatomy, a limited number of organs and tissues for dose calculation, inability to alter patient height and weight, and non-applicability to new CT technologies. Therefore, further studies are needed to overcome these limitations and to improve CT dosimetry.