SIMUWORKS仿真软件的应用研究

SIMUWORKS涵盖了系统优化设计与调试、过程仿真培训、故障诊断、复杂系统动态特性建模研究、专家系统等各个方向的应用,提供了一整套完备的全过程支撑、一体化、通用的应用环境,其根本是以微机环境为基础的应用平台。软件部分采用了面向对象的图形化建模方法、分布式实时数据库技术和动态内存机器码生成技术,在国内外仿真领域处于领先地位。     

莱钢宽厚板MES的开发与应用

为了满足宽厚板生产小批量、多品种、多工序、多要求的实际情况,结合工艺要求和先进的计算机技术开发出一套铸轧一体化的MES系统,使得各种生产数据及特殊生产要求准确无误并及时发送到现场的执行系统,兼顾了质量与效率;组板、组炉、组浇模型的采用为大规模生产创造了条件,兼顾了成本与效率.精确到每块材料的合同跟踪模型保证了产品的如期交货,从而保证了较高的客户满意度.系统采用成熟的三层架构,数据库采用稳定的Oracle数据库技术,前台开发工具采用主流的VS2008,数据库和应用服务器均采用IBM的Aix操作系统,保证了系统的稳定、高效、安全.通过MES的实施较好地解决了制造环节的各种问题.     

基于MYGCC的编程规则检查算法研究

MYGCC是一个编程规则检查工具,其目前的检查算法存在局限性,不能完整地展示违反编程规则的程序路径。本文提出并实现了一种改进的编程规则检查算法,可以弥补上述的局限性。实验表明改进算法是有效的,此改进有助于用户更准确地定位错误位置,方便对编程错误的修正。     

基于描述逻辑的OntoUML模型的形式化表示

将形式本体理论应用于UML语言的改进是UML的形式化研究的主要方法之一,其中On-toUML是一个概念上完整、语义上清晰和更具本体意义的UML版本。虽然OntoUML基于本体对UML进行了扩充,提供了更为丰富,更能表达现实世界语义的建模原语,但其表达方式不利于在信息系统的设计与开发中应用。本文基于描述逻辑对OntoUML中的关键建模原语及其关系给出了SHIQ形式化表示方法,并进行了实例研究。该方法表达精练、语义清晰,不仅能够表达逻辑清晰的模型,而且保证模型能够正确反映领域事实。这种形式化方法为信息系统概念建模方法提供了理论和应用支撑,在一定程度上推动了OntoUML更为广泛的应用。     

过热度对电脉冲孕育处理Al-5%CU合金凝固组织的影响

研究了不同的过热度对电脉冲孕育处理Al-5％Cu合金凝同组织的影响。实验结果表明：不同的过热度下对Al-5％Cu合金进行电脉冲处理，合金凝同组织均得到一定程度的细化，但过热度不同时细化效果不同。一定温度范围内．熔体温度为740℃时，电脉冲孕育处理细化的效果最好，并分析了过热度影响电脉冲孕育处理Al-5％Cu合金凝同组织的机制。     

Numerical simulation of microstructure formation ofAZ91 using mCA method

A stochastic model for simulating the microstructure formation of Mg alloy AZ91 during solidification was developed based on the finite element method（FEM） for macroscopic model of heat transfer calculation and a modified Cellular Automaton （mCA） for microscopic modeling of nucleation, growth of crystal. In this model, the effect of solute redistribution, interface curvature and preferred orientation was considered. A numerical simulation was developed with C＋＋ program language. The computation was carded out to understand the effect of varying processing parameters, such as nucleation parameters and heat transfer coefficient, on the microstructure formation of AZ91. The result of simulation was displayed on screen.     

EFFECT OF SURFACE OXIDATION ON THERMAL STABILITY OF AMORPHOUS Pd_(80)Si_(20)

<正> 本工作是在电子显微镜内原位加热的同时,观察α-Pd_(80)Si_(20)的氧化过程及其对晶化的影响。 用双喷制备的试样安装在JEM-200CX电子显微镜的加热台上,以不同的速度进行加热,并对氧化过程进行原位观察。试样室的真空度保持在～10~(-5)Pa,然后将原位观察过的试样,在Auger谱仪中用Ar~+离子对试样表面逐层剥离,以分析成分随深度的变化。为了对比,试样也在Auger谱仪中(真空度～10~(-7)Pa)进行加热,观察表面层成分随温度的变化。     

New inverse method for identification of constitutive parameters

A new inverse method by coupling iSIGHT and ABAQUS was proposed to determine the constitutive parameters of Al2O3sf/LY12 composite deforming at elevated temperature. It combined the merits of the f＇mite element simulation and optimization technique. The direct model was simulated with finite element code ABAQUS. The inverse problem associated with the identification of the constitutive parameters was expressed as a least square optimization problem. The direct simulation and the parameters optimization were implemented in iSIGHT integrated environment. The aim was to match the output of the direct simulation with the experiment data. The capability of the proposed inverse method was demonstrated through the identification of constitutive parameters of Al2O3sf/LY12 composite. The proposed new inverse method is also applicable to other parameters identification which is hardly determined through experiments or direct analytical method.     

Preparation of alumina-doped yttria-stabilized zirconia nanopowders by microwave-assisted peroxyl-complex coprecipitation

Alumina-doped yttria-stabilized zirconia （ADYSZ） nanopowders were prepared by microwave-assisted peroxyl-complex coprecipitation （MAPCC） using ZrOCl2-8H2O, Y2O3 and AICly6H2O as starting materials, NH2-H2O as precipitant and H2O2 as complexant. The effects of adding H2O2 and microwave drying on the preparation and properties of ADYSZ were investigated. The precursors and nanopowders were studied by EDX, XRD, SEM and TEM techniques. The results show that the uniformity of component distribution within ADYSZ nanopowders is improved by adding appropriate dosage of H2O2. Complexing reaction between H2O2 and Zr^4＋ ion restrains the hydrolyzation and precipitation of Zr^4＋ ion. With the addition of H2O2, Al^3＋, y^3＋ and Zr^4＋ ions can be precipitated synchronously in a relatively narrow range of pH value. H2O2 also improves the filterability of the wet precipitate. The highly hydrophilic precipitates can be quickly and effectively separated from aqueous solution. During microwave drying process, the moisture of wet precursors is selectively heated. Quick expansion of steam vapor within the wet colloidal particles causes the aggregations burst into numerous tiny lumps. Compared with oven drying, microwave drying can not only shorten drying time but also reduce aggregation intensity of the resultant ADYSZ nanopowders.