多样性制导分段进化的基因表达式编程

为了解决基于传统基因表达式编程（GEP）的函数挖掘及其改进算法仍然存在局部优化的缺陷这一问题,提出了以基因组多样性制导的分阶段进化挖掘算法DGGEP。给出了GEP 进化阶段和基因组多样性评估模式的定义;提出了描述进化阶段的进化因子概念和分阶段进化策略;采用动态遗传算子设计和群体规模控制方法,使进化更快速跳出局部最优。实验表明了新算法的有效性,能减少进化停滞代数65％以上,使群体的平均适应度提高12%以上。     

石油污染土壤异位修复生物堆建造关键技术研究

石油污染土壤生物修复技术是未来最具前景的低成本环保治理技术.结合异位生物堆修复关键控制指标,基于土壤多孔介质特性,建立了生物堆通风及灌溉数学模型,数值模拟了强制通风及灌溉过程生物堆内氧气和水的分布规律,给出了通风筛管及注水筛管最优布置方案,分析了通风速度及注水时间对生物堆温度的影响.结果表明:在生物堆建造尺寸确定的情况下,存在最佳的通风筛管及注水筛管布置方案,短时间歇通风对生物堆内温度影响较小,注水灌溉对生物堆内温度有一定影响,堆内温度变化前缘滞后于水相流动前缘.     

先进控制技术在波浪发电系统中的应用

由于波浪储量丰富,具有随机性,如何控制波能转换系统捕获最大波能和控制并网电能质量成为波浪发电的核心问题。简述了波能转换装置实现最大波能捕获的方法,综述了滑模变结构控制、自适应控制、最优控制、智能算法、模糊控制、无源控制在控制最大波能捕获以及改善电能质量方面的研究成果。并提出未来的控制算法应是多种先进控制算法相结合。     

有机硅原子氧防护涂层的喷涂工艺

以工件表面的涂层分布作为研究对象,对单点喷涂和平面喷涂过程进行微观分析,得出影响空气喷涂过程的工艺变量有喷涂距离、雾化压力、供胶压力、喷枪移动速率和搭接宽度,其中前3个参数决定了喷涂过程的微观基础单元──单点喷涂的质量,而后2个参数决定了涂层的厚度和连续性.试验表明,当喷涂距离为160～180 mm,雾化压力为400～500 kPa,供胶压力为240～400 kPa时,有机硅高聚物溶液的雾化效果较好,具有良好的单点喷涂效果.调整喷枪移动速率为120 mm/s和搭接率为1/2时,获得了厚度一致性较好的合格涂层.分析了喷涂过程中常见缺陷的产生原因,并提出了相应的控制措施,为原子氧防护涂层的喷涂提供参考.     

锆基块体非晶合金的力学性能研究进展

本文叙述了锆基块体非晶合金的制备方法，优异的性能，特别是对其力学性能研究领域的最新进展进行了综述。并与传统晶态合金作了适当的对比，锆基块体非晶合金具有优异的力学性能，如弹性比功、超塑性、断裂韧性等，此类合金的应用将不断拓宽。     

类金刚石膜的制备及其影响因素

概述了近年来制类金刚石膜的新技术如双射频辉光放电（RF－RF）法，射频－直流辉光放电（RF－DC）法和微波－射频（MW－RF）法等，并且对影响类金刚石膜制备及性能的因素如基体材料，制备类金刚石膜时在膜中添加元素，类金刚石膜与基材之间的中间层等进行了较全面的分析。     

Kinetics of synthesis of Li4Ti5O12 through solid-solid reaction

1. Introduction The solid-solid reaction used in synthesizing various kinds of electrochemical materials has many advantages, such as simple process, without using solvent, saving energy, friendly to the environment and easy to obtain good quality materials like nano-size materials. Recently, the manufacturing of electrochemistry materials has been paid more atten- tion due to its increasing needs. Therefore it is a natural interest to study the synthesis of electro- chemical materials by usin…     

Preparation and properties of PAn/ATTP/PE conductive composites

Polyaniline/Attapugite/PE（PAn-ATTP/PE）composites containing particles with core-shell structure were obtained via the two-step blending processs. The experimental condition is as follows： Organo-attapulgite and PAn was obtained by modifying attapulgite with laury benzenesulfonic acid sodium salt and, then added to PE. The electrical conductivity, structure and properties of the composites were studied. Under the function of shear stress, core-shell structure particles with ATTP as the core and PAn as the shell were formed in the composites. The structure of PAn-ATTP/PE composites were characterized by FTIR,XRD,SEM, etc, respectively. The effects of concentration of doping agent on the conductivity and mechanical property of the composites were investigated. The mechanical properties and impact fracture surface of the ternary composites were studied by means of the tensile tester, SEM, etc. The results show that polyaniline encapsulated ATTP enhances the strength of the PE. And the conductivity of PAn-ATTP/PE composites of is improved effectively when polyaniline encapsulated ATTP is added. The composite have good conductivity when 10% polyaniline encapsulated ATTP is added.     

用CAXA电子图板求解冲模压力中心

在模具设计中 ,冲裁模压力中心通常采用解析法或图解法求解。本文提出一种用CAXA绘图软件在设计制图时直接求解的方法 ,快速直接 ,简单方便 ,精度较高。