Melt-extracted oxide ceramic fibres — the fundamentals

A melt-extraction technique, using a sharpened molybdenum wheel, has been used to produce fine oxide ceramic fibres. Wetting of the molybdenum wheel by molten ceramic is a key parameter in the melt-extraction process. Two types of fibre are generally obtained, depending on the extraction speed. At very low wheel speed, fine and uniform fibres of high quality are produced. However, when the wheel speed exceeds a critical velocity, Rayleigh waves are formed on the free surface of the fibres. Moreover, the average fibre thickness first increases with the wheel velocity, then passes through a maximum, decreasing at high velocity. This thickness variation is discussed in terms of both surface tension and viscosity of the liquid ceramics.     

Batch-means control charts for autocorrelated data

Modern statistical process control must often cope with large quantities of highly autocorrelated data. Alwan and Radson (1992) proposed the monitoring of autocorrelated processes by plotting the averages of small batches of data separated by skipping observations. Using results for the AR(1) process, we show that generally better performance can be achieved with no skipping and much larger batch sizes. The resulting batch-means charts derive from methods used in simulation output analysis and can be implemented easily with common digital control systems.     

Experimental and numerical investigation of fracture in double-edge notched steel plates

Double-edge notched (DENT) steel plates were pulled until complete fracture and several experimental observations were made (using profilometry and scanning electron microscopy). The essential work of fracture (EWF) model was found to be well verified. Numerical simulations—up to the maximum load only—of some experiments were performed using the finite element method (FEM), and incorporating geometric and material non-linearities (large deformation elasto-plasticity). Some experimental measurements were compared with the corresponding numerical computations and excellent agreement was found.     

Tablet Excipients to the Year 2001: A Look into the Crystal Ball

The future for tablet excipients is reviewed from a number of viewpoints: new materials, formulation development, quality, regulatory aspects, logistics, and production. The field of excipients is changing rapidly in response to economic, regulatory, and scientific pressures. As our understanding of drug delivery improves, so will the demands we place on excipients and on their quality, both chemical and functional. In order to fully optimize drug delivery systems, a better understanding of excipients and their properties and limitations is required. The materials science approach to the study of excipients will help to increase our understanding of excipients and how best to use them. But excipients are only one part of the very complex mechanism whereby new medicinal products are brought to the marketplace. It is important that the processes of formulation design and development are properly integrated to obtain optimized drug delivery systems as early as possible. Developments in related fields such as manufacturing technology, logistics, and analytical techniques will also influence the field of excipients.     

Computational medicine: bioelectric field problems

Applications of large-scale computer modeling and simulation to a class of bioelectric field problems in a variety of biomedical research areas, from single cells to full human structures, are described. The authors focus on a specific subset of bioelectric field problems that have applications in electrocardiography and electroencephalography. The physics and physiology of bioelectric volume conductors are introduced. A specific computational example and the authors' view on the future direction of computational medicine are presented     

Thermal stability of Al/AlGaAs and Al/GaAs/AlGaAs (MBE) Schottky barriers

Outstanding stability has been observed in Al/Al/sub x/Ga/sub 1-x/As and Al/GaAs/Al/sub x/Ga/sub 1-x/As (x=0.25) Schottky barriers prepared by depositing Al in situ by MBE on annealing up to 400 degrees C. Conventionally evaporated barriers have been fabricated and compared with epitaxial ones. The changes in barrier height and ideality factor induced by annealing are reported.<>     

Pocket pagers in lots of one CIM

The Fusion program, a method for agile, flexible computer integrated manufacturing (CIM) at Motorola's Paging Products Group, is discussed. Fusion's CIM and automated assembly system can manufacture a wide variety of different products on the same production line. The development of the Fusion program and how it differs from its predecessor, the Bandit program, are described     

Gas-phase modification of rare-earth intermetallic compounds

Recent work concerning the interstitial modification of permanent magnet alloys based on rare-earth iron intermetallic compounds is reviewed. The crystal structure of the new materials is discussed, then the thermodynamic and statistical aspects of the low-temperature interstitial modification process are considered. Finally, reaction kinetics and thermal stability of the new compounds are discussed and future prospects assessed.     

Computer analysis,design and simulation of horizontal ground heat exchangers

This paper presents a new computerized procedure for dealing with the design of horizontal ground heat exchangers (HGHE). The computer program is based on the transient model of coupled nonlinear partial differential equations governing heat and mass flow in soils. The model is two-dimensional and delineates the operation of ground heat storage with the HGHE and such phenomena as freezing/thawing and drying/rewetting of soil moisture. Comprehensive climatological data, such as ambient temperature, solar radiation, wind velocity, rainfall, snowfall, snow characterstics, and water vapour pressure is used to simulate conditions at the ground surface over any required length of time. The package can be applied to any geographical location by changing climatic and soil data input. The designer has the possibility of selecting any of 12 types of soils from sand to clay, 12 commercial heat pumps, nine different configurations of the HGHE, 16 plastic pipes for ground coils, and 13 ground coil fluids. The program, however, does not calculate the length of the HGHE but it evaluates the thermodynamic performance of a ground heat pump system and provides comprehensive data on thermal and hydraulic conditions in ground heat storage. The length of the ground heat exchanger is obtained from a line source theory model or from site dimensions and pipe spacing. Computed results for ground heat exchanger operation correlate fairly well with experimental data. Simulation of temperature and moisture content in the ground for natural conditions (no heat extraction/deposition) showed a fair agreement with field data. The entire computer program is user-friendly, interactive, menu-driven, and written in FORTRAN 77.