Platinum concentrations in urban road dust and soil, and in blood and urine in the United Kingdom

Increasing Pt concentrations from vehicle catalysts have been reported from a number of countries. Analysis of Pt and Pd in soils and road dusts taken from areas of high and low traffic flows in SE England show concentrations of Pt in the range < 0.30-40.1 ng g-1 and Pd in the range < 2.1-57.9 ng g-1. Higher concentrations of Pt are associated with high traffic densities. Samples taken from streets of lower traffic flows were found to contain the lower concentrations of the ranges. Pilot studies of Pt concentrations in blood and urine using ICP-MS have been carried out. Platinum concentrations in whole blood were: precious metal workers, 780-2170, mean 1263 pmol l-1 (0.152-0.423, mean 0.246 microgram l-1); motorway maintenance workers, 645-810, mean 744 pmol l-1 (0.126-0.158, mean 0.145 microgram l-1); Imperial College staff, 590-713, mean 660 pmol l-1 (0.115-0.139, mean 0.129 microgram l-1). Platinum concentrations in urine in pmol Pt per mmol creatinine were: precious metal workers, 122-682, mean 273 [0.21-1.18, mean 0.47 microgram Pt (g creatinine)-1]; motorway maintenance workers, 13-78, mean 33.7 [0.022-0.135, mean 0.058 microgram Pt (g creatinine)-1]; Imperial College staff, 28-130, mean 65.6 [0.048-0.224, mean 0.113 microgram Pt (g creatinine)-1]. Detection limits were 0.03 microgram l-1 for both blood and urine. The possible health effects of increasing Pt in the environment are discussed. Platinum provides an excellent example of the significance of speciation in metal toxicity. Platinum allergy is confined to a small group of charged compounds that contain reactive ligand systems, the most effective of which are chloride ligand systems. Metallic Pt is considered to be biologically inert and non allergenic and since the emitted Pt is probably in the metallic or oxide form, the sensitising potential is probably very low. Platinum from road dusts, however, can be solubilised, and enter waters, sediments, soils and the food chain. There is at present no evidence for any adverse health effects from Pt in the general environment, particularly allergic reactions.     

How do the newer oral antimicrobials stack up against traditional agents?

As the antibiotic arsenal expands with the development of new oral agents, selecting appropriate therapy is becoming more difficult. What are the therapeutic indications for the newer antimicrobials, and what advantages do they have over traditional agents? Drs Gleckman and De La Rosa discuss current issues related to antibiotic treatment and offer specific recommendations for the best use of the newer agents.     

Hepatic and pancreatic effects of polyenoylphosphatidylcholine in rats with alloxan-induced diabetes

In neonatally allylestrenol treated animals in adult age a single benzpyrene treatment significantly decreases the female and significantly increases the male rat's sexual activity. Three month old females display the negative sexual behavioral effect of neonatal allylestrenol treatment less than the six month old ones. The benzpyrene treatment in adult age decreases the sexual activity of male rats. The experiments call the attention to the modifying effect of perinatal steroid treatments to similar exposure in adult age.     

Cost-benefit analysis of power system reliability: two utility casestudies

There is an emerging recognition that utility investments and other decisions that affect electric service reliability should be explicitly evaluated on the basis of their cost and benefit implications. A cost-benefit approach that quantifies the reliability benefits of alternatives in terms of the reduction in costs resulting from unserved energy enables the evaluation of generation and transmission capacity additions on a consistent, economic basis. This approach has been applied to two utility case studies. In a case study for Pacific Gas and Electric Company, it was used to evaluate three options for maintaining reliability in a major load center-two involving local generation, and the third, a new 230 kV transmission connection. In a case study for Duke Power Company, the approach was used to evaluate alternative designs for proposed additions to a transmission station. This paper describes the methodology and presents the two utility studies     

A high-current and high-temperature 6H-SiC thyristor

A 6H-SiC thyristor has been fabricated and characterized. A forward breakover voltage close to 100 V and a pulse switched current density of 5200 A/cm² have been demonstrated. The thyristor is shown to operate under pulse gate triggering for turn-on and turn-off, with a rise time of 43 ns and a fall time of less than 100 ns. The forward breakover voltage is found to decrease by only 4% when the operating temperature is increased from room temperature to 300°C. It is found that anode ohmic contact resistance dominates the device forward drop at high current densities     

Pulsed-current duty cycle dependence of electromigration-inducedstress generation in aluminum conductors

The effect of duty cycle of pulsed dc currents on the critical length-current density product, (jl_c), was measured using the Blech-Kinsbron edge-displacement technique [Thin Solid Films 25, 327 (1975)]. Unencapsulated Al edge-displacement segments mere stressed at various duty cycles and the critical lengths, the so-called “Blech lengths”, were measured. It was found that jl_c increased with decreasing duty cycle. We measured a factor of 2.6 increase in jl_c for the 25% duty cycle as compared to dc. This duty cycle dependence of Blech length implies that electromigration resistance for an integrated circuit would be increased for small duty cycle operation by increasing the fraction of interconnects which are sub-Blech-length and are not susceptible to EM damage     

Temperature and modulation characteristics of resonant-cavitylight-emitting diodes

Resonant-cavity light-emitting diodes (RCLED) are novel, high-efficiency light-emitting diodes which employ optical microcavities. These diodes have higher intensities and higher spectral purity as compared to conventional LEDs. Analytical formulas are derived for the enhancement of the spontaneous emission along the optical axis of the cavity. The design rules for high-efficiency operation of RCLEDs are established. The temperature dependence of the emission intensity is analyzed in the range 20-80° and it is described by an exponential dependence with a characteristic temperature of 112 K. The modulation characteristics of RCLEDs exhibit 3 dB frequencies of 580 MHz. Eye diagrams at transmission rates of 622 Mb/s are wide open indicating the suitability of RCLEDs for high-speed data transmission