IGES Model Comparison System: A Tool for Tsting and Validating IGES Processors

The IGES Model Comparison System (IMCOS) is the first test tool to allow an easy and automatic semantic comparison of CAD models represented in IGES format. By systematically analyzing and comparing entity data and structures of generated and exchanged IGES models, it detects loss of information and functionality resulting from model exchange via IGES processors. IMCOS was designed and implemented as a tabledriven IGES processor to allow external control of the comparison process and full coverage of the current version of IGES (Version 3.0) and future versions. This article presents the basic concepts of IMCOS. The great interest in and discussion of IMCOS have shown the importance of such a test tool. IMCOS may be used as one of several test tools within an overall IGES verification program.     

Calorimetric output power measurements on a CW 20 kW 7.16 GHzmicrowave transmitter

A calorimetric measurement technique developed for NASA's Deep Space Network (DSN) transmitters that does not require data on the coolant's thermal parameters is described. Calibration of the measurement system is achieved by measuring the DC input power to the klystron and relating coolant temperature increase to this known power dissipation. Agreement between calorimetric and electrical measurements of total system power was good, the difference being less than 2%. The operation of the system was not greatly affected by the composition of the coolant, which was varied from pure water to 40% ethylene glycol by mass. Good accuracy was also shown at output power levels, which varied over a 3.6:1 range     

Lithium/lithium vanadium oxide secondary batteries: IV. Evaluation of factors affecting the performance of test cells

With the aim of optimizing the performance of Li/Li_1+xV₃O₈ cells, several aspects of cathode preparation have been examined. The influence of synthesis technique, nature and amount of conductive additives, compacting pressure, cathode loading, and particle size, has been investigated. Furthermore, the role played by the solutions on cathode efficiency has been outlined. The formulations which perform best are based on small-sized particles blended with about 20% acetylene black and compacted at very high pressures to improve the contact between particles. Such cathodes can provide high capacities at high rates and good cycling efficiencies. The kinetic loss of capacity, observed during the first few cycles, may be alleviated by choosing solutions with high fluidity and conductivity.     

A NOTE: POLYVALENT RADIOVACCINE AGAINST SALMONELLA

Salmonella strains exposed to lethal doses of gamma radiation are detoxified but retain their antigenic properties. Using eight Salmonella strains representative of each of the Salmonella serogroups A to G, a polyvalent radiovaccine has been developed which effectively immunizes mice to several Salmonella serotypes.     

Evaluation of constructed wetlands by wastewater purification ability and greenhouse gas emissions.

Domestic wastewater is a significant source of nitrogen and phosphorus, which cause lake eutrophication. Among the wastewater treatment technologies, constructed wetlands are a promising low-cost means of treating point and diffuse sources of domestic wastewater in rural areas. However, the sustainable operation of constructed wetland treatment systems depends upon a high rate conversion of organic and nitrogenous loading into their metabolic gaseous end products, such as N2O and CH4. In this study, we examined and compared the performance of three typical types of constructed wetlands: Free Water Surface (FWS), Subsurface Flow (SF) and Vertical Flow (VF) wetlands. Pollutant removal efficiency and N2O and CH4 emissions were assessed as measures of performance. We found that the pollutant removal rates and gas emissions measured in the wetlands exhibited clear seasonal changes, and these changes were closely associated with plant growth. VF wetlands exhibited stable removal of organic pollutants and NH3-N throughout the experiment regardless of season and showed great potential for CH4 adsorption. SF wetlands showed preferable T-N removal performance and a lower risk of greenhouse gas emissions than FWS wetlands. Soil oxidation reduction potential (ORP) analysis revealed that water flow structure and plant growth influenced constructed wetland oxygen transfer, and these variations resulted in seasonal changes of ORP distribution inside wetlands that were accompanied by fluctuations in pollutant removal and greenhouse gas emissions.     

Possibility of sewage and combined sewer overflow reuse with biological aerated filters.

The secondary effluent from municipal plants in Korea generally represents higher BOD with lower SS. Therefore, more soluble forms of organics and NH4-N need to be removed to improve its effluent for reuse. In this study reuse possibility of secondary effluent and CSO (combined sewer overflow) using BAF (biological aerated filter) was evaluated. The tertiary application with 1.2 h EBCT, SS, BOD and COD showed stable concentrations less than 1.3, 1.3 and 6.2 mg/L, respectively. Nitrogen could be nitrified even at 7 degrees suggesting BAF can be used for a water reuse method as well as an effective add-on facility in cold regions. However, BAF was not stable with CSO application at increased flow rates suggesting CSO must be equalised prior to application. Disinfection was necessary even during normal weather conditions.     

Deconvolution of infrared spectra using various milk proteins as an example

The theory of deconvolution of infra-red spectra is presented and illustrated using milk protein spectra. The advantage of this method is impressively demonstrated and its relevance for dairy farming shown using a simple example, the cooling of milk.     

QUANTITATIVE ANALYSIS OF FLAVANOIDS IN BARLEY,HOPS AND BEER BY HIGH-PERFORMANCE LIQUID CHROMATOGRAPHY (HPLC)

This work describes a method for the quantitative analysis of flavanoids of barley, hops and beer by HPLC. This method requires only about 4 h and it gives representative and reproducible results. A few results obtained by this method are given for barley and hops.