Prolonged hypoxaemia after nebulised salbutamol

Pulse oximetry is increasingly used to assess hypoxaemia in respiratory illnesses. Six children presenting with acute asthma and prolonged falls in oxygen saturation values after treatment with salbutamol are described who were subsequently shown to have pneumonic consolidation on chest radiography.     

Analysis of thin walled structures using the boundary element method

In this article the direct boundary element formulations of stretching and bending plate problems are combined together to solve thin walled structures and other similar frames. The final system is obtained by assuming each individual plane structural element as a subregion. After the necessary transforms of these equations they can be combined together taking into account the displacement compatibility and equilibrium conditions.     

Base alumina ceramics with dispersoids: mechanical behaviour and tissue response afterin vivo implantation

Base alumina ceramics with dispersoids (BAC) are a new class of ceramics with improved mechanical properties as compared to pure alumina. They are obtained by dispersion of powder within an alumina matrix. Of the three new ceramics studied here, A20Z possesses the best mechanical properties as well as tribological properties superior to those of pure alumina whether it is used in ceramic-ceramic or ceramic-polyethylene combination.Mechanical behaviour and tissue response afterin vivo implantation were studied. Small four-point flexion bars obtained by pressureless sintering were implanted subcutaneously in the rat. The mechanical properties were unmodified even after one year from implantation.The tissue response was studied up to one year on cylinders implanted in the paravertebral muscles of Wistar rats, and was evaluated by qualitative examination of the encapsulating membrane and measurement of its thickness in relation to pure alumina. The tissue responses were comparable for both alumina and the three tested ceramics.     

Alumina scale growth at zirconia-MCrAlY interface: a microstructural study

High-temperature oxide scale growth at the ceramic-metal interface is a major contributor to the thermomechanical resistance of thermal barrier coatings for hot stages of gas turbines. In order to better understand this phenomenon, microstructural observations of the alumina scales formed at 1100 and 1200 °C under air, between low-pressure plasma-sprayed NiCrAlY and air plasma-sprayed ZrO₂-8.5 wt % Y₂O₃, have been performed by classical and analytical transmission electron microscopy on transverse thin foil specimens. The evolution of the oxide grain morphology from the metal-oxide to the oxide-oxide interface suggests that the scale growth principally takes place at the metal-oxide interface. Segregation of yttrium at oxide grain boundaries has been detected as well as significant quantities of zirconium inside the alumina grains. The oxide growth seems to be dominated by a classical grain-boundary oxygen diffusion mechanism. The presence of zirconium inside the alumina grains also suggests that Al₂O₃ partially forms by chemical reduction of ZrO₂ by AI. The comparison between the microstructures observed and that of alumina scales grown under similar conditions on bare MCrAlY alloys gives some insight into how the ceramic top-coat modifies NiCrAlY high-temperature oxidation mechanisms.     

Pullout tests of epoxy-coated reinforcement in concrete

The bond strength and slip of epoxy-coated reinforcing bars in concrete have been evaluated by carrying out single pullout and double pullout tests. In extended single pullout tests, slip measurements were made while tensile force was applied to reinforcing bars embedded in concrete. In double pullout tests, 20 cycles of load were applied at levels of steel stress between zero and 0·5 times characteristic steel strength. Strains were measured by electrical resistance strain gauges glued inside the bars. Both epoxy-coated and uncoated bars were used in the investigation, to obtain comparative results. The strain gradient along the bar was found to be less for the coated reinforcement. In general, the epoxy coating was found to increase slip in bond and thereby reduce the bond performance of coated bars.     

Analysis of a resonant-cavity enhanced GaAs/AlGaAs MSMphotodetector

The authors have developed a 2-D device simulator for heterostructure metal-semiconductor-metal (MSM) photodetectors. They have incorporated a model of multilayer optics into the simulator and used it to analyze the temporal response of a resonant-cavity enhanced heterostructure with a confining buffer layer and a distributed Bragg reflector (DBR). The authors show that through fine tuning the layer thicknesses, optical resonance enhancement of the light absorption can be obtained     

Stabilization of high-impact polystyrene/ polyethylene blends

Commercial poly(styrene-b-butadiene) copolymers (SBS) can act as effective compatibilizers in blends between high-impact polystyrene (HIPS) and polyethylene (PE), allowing a fine dispersion of PE in the polystyrene matrix, with a good balance of stiffness and impact strength. However, when processed under more severe conditions (e.g. in multiple extrusions, which simulate customer's product scrap recovery), the above blends show rather poor stability and their useful properties are rapidly lost. That undesirable effect is mainly due to cross-linking of SBS, which thus looses its compatibilizing activity. A correlation has been found between the time-to-cross-linking of SBS rubber in a Brabender mixer and the rapid decay of mechanical properties. The analysis of the mixing process and the morphology examinations of the final blend sample by TEM seem to support the above hypothesis. A significant reduction of block copolymer degradation has been achieved by means of a suitable stabilization.     

Three-dimensional fracture simulation with a single-domain,direct boundary element formulation

An efficient hypersingular boundary integral equation method for three-dimensional fracture mechanics was presented in a previous paper. The details of the numerical implementation of this method are further discussed herein. In particular, an algorithm for achieving the required differentiability of the crack surface displacement function is discussed. To illustrate the utility of the method, computational results for several strongly interacting multiple-crack geometries are presented. The calculated stress intensity factors are in excellent agreement with those obtained by an approximate analytical method due to Kachanov and Laures.     

Numerical and asymptotic solutions for the thermal wall jet

This paper considers the evolution of the velocity and temperature fields within a jet of fluid on a thermally insulated wall. Numerical solutions are obtained for a range of Prandtl numbers and for a class of initial velocity and temperature profiles relevant to intrusion jets observed in certain thermal cavity flows. Numerical results are compared with asymptotic solutions which describe the initial structure of the jet and its subsequent diffusion at large distances downstream.     

Recursive optimal pruning with applications to tree structuredvector quantizers

A pruning algorithm of P.A. Chou et al. (1989) for designing optimal tree structures identifies only those codebooks which lie on the convex hull of the original codebook's operational distortion rate function. The authors introduce a modified version of the original algorithm, which identifies a large number of codebooks having minimum average distortion, under the constraint that, in each step, only modes having no descendents are removed from the tree. All codebooks generated by the original algorithm are also generated by this algorithm. The new algorithm generates a much larger number of codebooks in the middle- and low-rate regions. The additional codebooks permit operation near the codebook's operational distortion rate function without time sharing by choosing from the increased number of available bit rates. Despite the statistical mismatch which occurs when coding data outside the training sequence, these pruned codebooks retain their performance advantage over full search vector quantizers (VQs) for a large range of rates.