Hazard analysis and critical control point of frying – safety assurance of fried foods

Deep frying can pose hazards due to oil deterioration (oxidation, polymerization, hydrolysis) and harmful components formation such as trans fatty acids, highly oxidized or polymerized constituents of fatty acids and acrylamide. An analysis of safety hazards of the production of the potato chips and french fries, was carried out from potato harvesting until final products packaging according to hazard analysis and critical control point approach focusing mainly on the first three principles. Since frying is considered a critical control point, the critical limits for the frying temperature and for the potential hazards must be controlled in order to ensure fried products safety.     

Examining prepotent response suppression in aging: A kinematic analysis.

Two experiments were designed to explore how age differences in conflict detection may contribute to poorer motor performance. In each experiment, 12 young adults (YAs) and 12 older adults (OAs) performed a finger sequencing task in which the frequency of specific critical transitions was varied. These critical transitions were contrasted with violation transitions to assess the ability to detect a conflict in response requirements. In addition to accuracy and reaction time, the authors used kinematic data to parse movements into planning and motor execution phases. OAs were differentially slower to respond to violations than YAs, in line with other research on executive control, prepotent response suppression, and aging. Kinematic analyses revealed that YAs executed movements more rapidly on violation than critical transitions, whereas OAs executed movements at the same speed regardless of response predictability and increased planning time. The authors argue that OAs are unable to reprogram prepotent movement plans to overcome slowed movement planning in cognitively challenging situations. The results are discussed in terms of the influence of age-related cognitive inefficiency on motor control. (PsycINFO Database Record (c) 2010 APA, all rights reserved)     

Therapists’ use of congruence in nondirective play therapy and filial therapy.

Although the U.S. child-centered approaches of Garry Landreth and Louise Guerney have the same principles and practice skills as nondirective play therapy as practiced by therapists trained at the University of York, there are a few differences in their approach. Therapists’ practice of “congruence” is actively encouraged for York-trained therapists but not for Landreth and Guerney-trained therapists. The theoretical and practice rationales for expressing congruence that underlie the York approach are examined here, as well as potential pitfalls. Examples of therapists and parents verbally expressing their congruent feelings in therapy are given from both play therapy and filial therapy practice. Special attention is paid to the need for and uses of congruence when helping children and young people who were maltreated. (PsycINFO Database Record (c) 2010 APA, all rights reserved)     

Influence of water type and maturation time on the properties of kaolinite–saponite peloids

We studied the effects of maturation time and water type on the properties of peloids. The peloids were prepared artificially by mixing the same amount of solid phase of kaolin and bentonite (9:1, m:m) with hypersaline mineral water (sodium potassium chloride water) from a spring in La Malahá (Granada, Spain) and bidistilled water (oligometallic water). The liquid/solid ratio was 2:1, m:m, with periodic manual homogenization and maturation time of one to three months. The water content of the peloids was maintained constant during the entire period of maturation.The peloid properties considered were the composition of the liquid phase, the thermal behaviour, the amount of defects in the structure of the main minerals present in the solid phase (kaolinite and saponite) and the ultramicroscopic fabric of the material, determined by scanning electron microscopy (SEM) and image analysis (IA). To date, the latter aspect has been very little studied.The composition of the liquid phases changed with maturation time. Most of the parameters measured showed a tendency to increase with increasing maturation time, as a consequence of releasing ions from the clay minerals into the liquid phase. Thus, the bidistilled water became mineral water. The initial differences between the two waters employed in the mixture were maintained in the liquid phases.The investigation of the thermal behaviour of the peloid revealed that the decrease in temperature followed, with time, a fitted logarithmic curve where R² > 0.9. The maximum change occurred in the first stage, later cooling being slower. A statistic relationship was found between the cooling kinetic and pore size and the size of the particle aggregates measured by SEM-IA. The peloids cooled more rapidly with increasing maturation time, as in the case of saline water.Both the Hinckley index of kaolinite and Integral Breadth index of saponite changed with the maturation time of the peloid. At the end of the maturation process similar values were reached regardless of the water employed.The main effect of maturation time was the increase in the size of the particle aggregates, the formation of a fabric with a more reticular morphology, and the increase in the area occupied by the pores in the SEM micrographs.     

Technology Evaluation of Hydrogen Light-Duty Vehicles

This study analyzed candidate hydrogen-fueled vehicles for near and long-term use associated with their efficiency, performance, and emissions. Various types of hydrogen-fueled vehicles were assessed using Argonne National Laboratory's Powertrain System Analysis Toolkit vehicle simulation model. These include hythane- and hydrogen-fueled internal combustion engines (ICEs), hydrogen-fueled hybrid electric propulsion, and direct hydrogen fuel cells. Vehicle sizes and configurations, consistent with the available component models/data, were simulated to compare efficiency and emissions with baseline conventional vehicles. The simulations provided salient information on the vehicle characteristics, performance, and efficiency, as functions of operating conditions on standard driving cycles. It was found that substantial gains in fuel economy can be achieved through hybridization both for conventional and fuel cell vehicles. When hybridized, hydrogen ICE configurations achieve similar fuel economy to gasoline counterparts. The results also confirm that ICE hybrid electric vehicles (HEV) achieve higher fuel economy than fuel cell configurations and comparable results with fuel cell HEV. Comparison of efficiency results for various driving cycles further indicates that cycles with low power demand are most suited for hybrid operations.     

Thermal etching of GaAs (1 1 3) surfaces

We discuss scanning electron micrographs and atomic force microscope images of thermally etched GaAs(1 1 3) surfaces. The GaAs(1 1 3)A and GaAs(1 1 3)B surfaces are compared. The polarity of the surface leads to a different morphology for the two surfaces after thermal etching. It is found that the Ga-enriched droplets, which form under As-deficient conditions at higher temperatures, are sitting on characteristic pedestals, which are different for the two faces. The facets occurring after this thermal etching process are identified. They represent thermally favourable surfaces under the arsenic-deficient conditions of the thermal etching process. © 1998 Chapman & Hall     

Cost-efficient parallel programs based on set-distributions for polynomial interpolation

The paper presents parallel algorithms for Lagrange and Hermite interpolation methods formally derived from specifications, and using set-distributions. Set-distributions are based on set-valued mappings, and they assign a data object to more than one process. The derivation from specifications assures the correctness, and the set-distributions assure the efficiency of the programs. The obtained parallel algorithms have very good time complexities and speeds-up, and they are also cost-efficient. We consider the number of processes p to be a parameter of the algorithms, so, bounded parallelism is considered. The derivation of the algorithms is not ruled by any particular interconnection network. The possible mappings on different networks could be evaluated. The performance analysis is done considering a full-connected network, and other two interconnection networks: hypercube and multi-mesh hypercube, which preserve the cost-efficiency of the algorithms.