Nanobodies and Nanocrystals: Highly Sensitive Quantum Dot‐Based Homogeneous FRET Immunoassay for Serum‐Based EGFR Detection

Semiconductor quantum dot nanocrystals (QDs) for optical biosensing applications often contain thick polyethylene glycol (PEG)‐based coatings in order to retain the advantageous QD properties in biological media such as blood, serum or plasma. On the other hand, the application of QDs in Förster resonance energy transfer (FRET) immunoassays, one of the most sensitive and most common fluorescence‐based techniques for non‐competitive homogeneous biomarker diagnostics, is limited by such thick coatings due to the increased donor‐acceptor distance. In particular, the combination with large IgG antibodies usually leads to distances well beyond the common FRET range of approximately 1 to 10 nm. Herein, time‐gated detection of Tb‐to‐QD FRET for background suppression and an increased FRET range is combined with single domain antibodies (or nanobodies) for a reduced distance in order to realize highly sensitive QD‐based FRET immunoassays. The “(nano)²” immunoassay (combination of nanocrystals and nanobodies) is performed on a commercial clinical fluorescence plate reader and provides sub‐nanomolar (few ng/mL) detection limits of soluble epidermal growth factor receptor (EGFR) in 50 μL buffer or serum samples. Apart from the first demonstration of using nanobodies for FRET‐based immunoassays, the extremely low and clinically relevant detection limits of EGFR demonstrate the direct applicability of the (nano)^2‐ assay to fast and sensitive biomarker detection in clinical diagnostics.     

Experimental study and modelling of tool temperature distribution in orthogonal cutting of AISI 316L and AISI 3115 steels

Cutting tool temperature distribution was mapped using the IR-CCD technique during machining of carbon steel AISI 3115 and stainless steel AISI 316L under orthogonal cutting conditions using flat-face geometry inserts. The effect of work material treatment on tool temperature was investigated, and the results showed that AISI 3115 in heat-treated state displayed higher tool temperature than the as-rolled state. Stainless steel 316L with high sulphur content (0.027?wt.%) and calcium treatment displayed lower cutting tool temperature than the variant with low sulphur (0.009?wt.%). The experimental results were compared with theoretical tool temperature distributions based on a modified version of Komanduri and Hou??s analytical model. In particular, variable frictional heat source and secondary shear were introduced and modelling of the tool stress distribution on rake surface was also considered.     

Mercury and methylmercury concentrations in high altitude lakes and fish (Arctic charr) from the French Alps related to watershed characteristics

Total mercury (THg) and methylmercury (MeHg) concentrations were measured in the muscle of Arctic charr (Salvelinus alpinus) and in the water column of 4 lakes that are located in the French Alps. Watershed characteristics were determined (6 coverage classes) for each lake in order to evaluate the influence of watershed composition on mercury and methylmercury concentrations in fish muscle and in the water column. THg and MeHg concentrations in surface water were relatively low and similar among lakes and watershed characteristics play a major role in determining water column Hg and MeHg levels. THg muscle concentrations for fish with either a standardized length of 220 mm, a standardized age of 5 years or for individualuals did not exceed the 0.5 mg kg^− 1 fish consumption advisory limit established for Hg by the World Health Organization (WHO, 1990). These relatively low THg concentrations can be explained by watershed characteristics, which lead to short Hg residence time in the water column, and also by the short trophic chain that is characteristic of mountain lakes. Growth rate did not seem to influence THg concentrations in fish muscles of these lakes and we observed no relationship between fish Hg concentrations and altitude. This study shows that in the French Alps, high altitude lakes have relatively low THg and MeHg concentrations in both the water column and in Arctic charr populations. Therefore, Hg does not appear to present a danger for local populations and the fishermen of these lakes.     

Model reduction via Schur decomposition

A simple procedure for model reduction based upon a Schur decomposition of a given system is presented. The obtained partitioned system allows the combination of singular perturbation and aggregation approaches     

Polyesters bearing furan moieties

Summary This paper describes a preliminary set of results concerning novel systems in which the synthesis of furanic polyesters was conducted according to a transesterification procedure. Regular linear macromolecular structures were thus obtained with molecular weights well above those previously reported for similar polyesters prepared by more conventional routes.     

Anisotropy of hygrothermal damage in fiber/polymer composites: Effective elasticity measures and estimates

Measured elasticity moduli of a highly (68%) glass-fiber reinforced epoxy matrix for different amounts of fiber/matrix interface weakening and debonding, due to different hygrothermal ageing stages, are compared to estimated ones. Ultrasonic measurements provide seven of the nine elasticity moduli of the orthotropic material samples, including all the moduli significantly affected by damage. Theoretical estimates combine homogenization modeling techniques and Finite Element (FE) calculations, the latter when the effect of observed partial debonding on effective moduli is to be specified. These estimates are performed under different assumptions for the composite structure, with special attention to the existence of a fiber–matrix interphase. Analytical comparisons for the undamaged composite establish that matching US measurements with estimates cannot be obtained, regardless of the chosen model, without the assumption of an interphase layer of modified resin coating the fibers. This coating resin, when in relevant concentration with regard to literature data about fiber coating thickness, typically conserves the epoxy moduli transversally to the fiber orientation, while, in the fiber direction its moduli approach those of the fibers. The comparison of the US measurements on damaged samples to FE calculations assuming progressive one-directional debonding shows that most of the composite stiffness loss can preferentially be due to an initial interphase weakening, while the fiber/matrix debonding seems more likely delayed to long H-ageing times. This is consistent with physical interpretation of damage by water pooling through silane bridges bonding epoxy to glass. The calculations also provide the effective stiffness, at different damage stages, of the “Undamaged Equivalent Inhomogeneity” for this damaged inclusion type.     

CMOS RF switched capacitor bandpass filter tuned by ring VCO

A new RF switched capacitor bandpass filter and its command circuit made up of a ring voltage controlled oscillator with ‘XOR’ gates are proposed. Implemented in a standard CMOS technology, this circuit is intended to be used in a subset of professional mobile phone applications [380–520 MHz]. Experiments carried out on a prototype show a tunable center frequency range of 260 MHz [240–500 MHz], with a quality factor that can be as high as 300.     

In situ measurement of the infrared absorption and extinction of chemical and biologically derived aerosols using flow-through photoacoustics

In an effort to establish a more reliable set of optical cross sections for a variety of chemical and biological aerosol simulants, we have developed a flow-through photoacoustic system that is capable of measuring absolute, mass-normalized extinction and absorption cross sections. By employing a flow-through design we avoid issues associated with closed aerosol photoacoustic systems and improve sensitivity. Although the results shown here were obtained for the tunable CO2 laser waveband region, i.e., 9.20-10.80 microm, application to other wavelengths is easily achievable. The aerosols considered are categorized as biological, chemical, and inorganic in origin, i.e., Bacillus atrophaeus endospores, dimethicone silicone oil (SF-96 grade 50), and kaolin clay powder (alumina and silicate), respectively. Results compare well with spectral extinction measured previously by Fourier-transform infrared spectroscopy. Comparisons with Mie theory calculations based on previously published complex indices of refraction and measured size distributions are also presented.     

Evaluation of a program to reduce motor-vehicle collisions among young adults in the county of Landes, France

The aim of this study was to evaluate the impact of a prevention program called “Atout-Route”, based on the concept of commitment. The program was implemented in March 2000, to reduce the number of drivers under the age of 25 years involved in motor-vehicle collisions in the county of Landes (southwestern France). Using data from the regional observatory of road safety, we defined a target and three control groups similar on age or location. We used Poisson and quasi-Poisson regression to estimate whether the observed evolution of motor-vehicle collisions, after the program was implemented, was different in the targeted group than in the three control groups. The number of motor-vehicle collisions decreased everywhere and in every age group. The effect of the prevention program was not statistically significant (relative risk = 0.89; 95% confidence interval 0.74–1.07). Our results are compatible with a positive effect of the program. The possible dilution of its effect by national road safety actions implemented since 2000, and our early assessment are possible reasons for the non-significant observation.