Fluid flow with abrupt viscosity-temperature dependence

The paper is focused on studies of channel viscous flow stability with the high dependence viscosity on temperature (thermoviscosity effect). It is shown the essential influence of this effect on the entrance length or transition from any initial profile to the stationary profile of the plane channel flow. The obtained solution has an inflection point in the velocity profile for the certain range of flow parameters. This evidence with respect to Rayleigh’s inflection theorem involves thermoviscous media deserving consideration objects for stability problems.     

Quantitative Evaluation Method for Etch Sidewall Profile of Through‐Silicon Vias (TSVs)

Through‐silicon via (TSV) technology provides much of the benefits seen in advanced packaging, such as threedimensional integrated circuits and 3D packaging, with shorter interconnection paths for homo‐ and heterogeneous device integration. In TSV, a destructive cross‐sectional analysis of an image from a scanning electron microscope is the most frequently used method for quality control purposes. We propose a quantitative evaluation method for TSV etch profiles whereby we consider sidewall angle, curvature profile, undercut, and scallop. A weighted sum of the four evaluated parameters, nominally total score (TS), is suggested for the numerical evaluation of an individual TSV profile. Uniformity, defined by the ratio of the standard deviation and average of the parameters that comprise TS, is suggested for the evaluation of wafer‐to‐wafer variation in volume manufacturing.     

Fingerskate: Relaxing the Physical Constraint of Two-Finger Touchscreen Operations

Two-finger operations, such as rotation operations and zoom operations, are now standard touchscreen operations. However, these two-finger operations may pose an ergonomic problem when they are performed with one hand. FingerSkate is an interaction technique to mitigate the ergonomic problem of two-finger operations adopting the concept of gesture relaxation. A preliminary study showed that the FingerSkate technique was accepted well by the participants. In particular, a micro-analysis of finger movements during the study showed that FingerSkate was utilized well for large rotations. In a subsequent user study, the effects of two FingerSkate design options, Concurrency and Pivot, were examined. The Concurrency option had a statistically significant effect on performance and task workload for a docking task. The Pivot option had a statistically significant effect on task workload for a puzzle task. More participants preferred the sequential Concurrency option, and most participants preferred the center-of-object Pivot option.     

Electrical discharges with liquid electrodes used in water decontamination

The results of experimental investigation of the DC electrical discharge with moving air bubbles in the electrolyte, as well as of high frequency electrical discharge with a diaphragm membrane, within a wide parameter range are presented. We investigated active component formation and enhancement of the wastewater decontamination by means of production of a disinfecting agent with a maximal content of the electrical discharge products (copper and silver ions and hydrogen peroxide).     

Chain flexibility versus molecular entanglement response to rubbing deformation in designing poly(oxadiazole-naphthylimide)s as liquid crystal orientation layers

Four poly(oxadiazole-imide)s containing naphthalene rings, with different flexibility and molecular weight, are investigated with respect to their rheological properties to establish the optimal processing conditions from solution phase to film state for liquid crystal orientation purposes. The film uniformity and strength are determined by monitoring the flow behavior and chain entanglements. The solution rheological data are in agreement with film tensile testing, revealing that higher molecular weight favors chain entanglements and implicitly the film mechanical resistance. In order to analyze the suitability of these films as alignment layers their surface is patterned by rubbing with two types of velvet. Liquid crystal alignment of 4′-pentyl-4-biphenylcarbonitrile nematic is tested by polarized light microscopy. The resulting behavior is correlated with the polyimide malleability and characteristics of the textile fibers, namely their polarity, size, and mechanical features. The competitive effects between chain flexibility and entanglements, together with the interactions occurring between the polymer and velvet are analyzed in order to explain the surface regularity, which influences the uniformity of the liquid crystal alignment. The contrast between dark and bright states recorded on the liquid crystal cell indicates that some of these polynaphthalimides are promising candidates for liquid crystal display devices.     

Effect of Sintering Temperature on Thermoelectric Properties of p‐Bi2Te3 Alloys Produced by Gas Atomization

In this research, p‐type Bi₂Te₃–75% Sb₂Te₃ thermoelectric alloy powders were produced by gas atomization and subsequently sintered by hot pressing at different temperatures. The grain growth of the hot‐pressed samples was observed with increasing sintering temperature from 380°C to 460°C. The compressive strength increased with increasing hot‐pressing temperature due to the high relative density of bulk samples obtained at high temperatures. The effect of sintering temperature on thermoelectric (TE) properties was studied. The maximum power factor 3.48 mW/mK² was obtained for the sample hot pressed at 420°C due to the resulting high electrical conductivity and enhanced Seebeck coefficient values.     

Preparation and characterization of composite gels and films containing gelatin and hydroxypropyl methylcellulose phthalate

Composite gels and films were prepared by the blending of hydrated gelatin as a base material and hydroxypropyl methylcellulose phthalate (HPMCP) at various mass ratios. A composite technology was applied to obtain improved mechanical, physicochemical, and antimicrobial properties of the gelatin used as a base material. We investigated the effects of different experimental conditions on the rheological and mechanical properties and antimicrobial activities of the composite gels, films, and solutions. The rheological values (storage modulus, loss modulus, and complex viscosity) of the composite solutions and gels increased with added HPMCP. Aerobic microorganisms, yeasts, and molds were not detected throughout the testing period in the gelatin–HPMCP composite solution. In contrast, many microorganisms were detected in the gelatin‐only samples beginning with day 3 of storage. The composite films exhibited relatively good mechanical and physical properties compared with the gelatin‐only film. The composite film containing HPMCP at a mass ratio greater than 1:4 did not dissolve in gastric juice (pH 1.2) for at least 2 h, but all other samples, including the gelatin‐only film dissolved in enteric juice (pH 6.8). © 2013 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2014 , 131, 39597.     

Phosphaannulation of Aryl‐ and Benzylphosphonic Acids with Unactivated Alkenes via Palladium‐Catalyzed C?H Activation/Oxidative Cyclization Reaction

An efficient phosphaannulation via palladium(II)‐catalyzed C H activation/oxidative cyclization by the 6‐endo mode is reported for the synthesis of 3‐substituted phosphaisocoumarins from the reaction of arylphosphonic acids with unactivated alkenes under aerobic conditions. Also, α,α‐disubstituted benzylphosphonic acids were phosphaannulated with unactivated alkenes, producing phosphaisochromanones having (Z)‐alkylidenyl groups via anti‐phosphoryloxypalladation by the 6‐exo mode.

     

Enhanced impact strength of compatibilized poly(lactic acid)/polyamide 11 blends by a crosslinking agent

Maleated poly(lactic acid) (PLA-g-MA) was prepared through melt grafting of maleic anhydride onto a PLA backbone with the aid of a radical initiator. PLA-g-MA thus formed was incorporated into PLA/polyamide 11 (PA11) blends as a reactive compatibilizer. By morphological observation, it was assessed that PLA-g-MA lowered the interfacial energy and strengthened the interface between PLA and PA11. However, the compatibilized PLA/PA11 blends did not show significant improvement of impact strength compared with noncompatibilized PLA/PA11 blends. Measurements of the molecular weight and impact strength of PLAs compounded with various amounts of radical initiators revealed that decreased molecular weight of PLA by the radical initiator used for the preparation of PLA-g-MA is responsible for this unexpected result. To compensate the decrease of the molecular weight, a crosslinking agent was incorporated in the preparation step of PLA-g-MA. It was found that the crosslinking agent is effective in preventing the molecular weight reduction. As a result, the impact strength of the PLA/PA11 blend was enhanced to a great extent by the PLA-g-MA prepared with the crosslinking agent.