Growth of Mixed Rare Earth Tartrate Crystals (Y(1-x)Sm_x)_2(C_4H_4O_6)_3·zH_2O from Silica Gels

Experiments performed on the grwth of mixed crystals of rare earth tartrates (Y1-xSmx)2 (C4H4O6)3.zH2O (0≤x≤1) from silica gels at 35~40℃ and 25~30℃ employing single-diffusion technique. are discussed. The crystals maintain spherulitic morphology, irrespective of the value of x, concentration of upper and lower reactants, gel pH, gel age and gel temperature. Formation Of Liesegang rings in this system is a temperature dependent phenomenon. It is shown that with the increase of the value of x the system passes from Liesegangring phenomenon to singlezone phenomenon. Operative mechanism of crystallization in the higher (35~40℃) and lower temperature ranges (25~30℃) is explained. Seeded growth experiments indicate the possibility of increasing the size of the spherulites in the gel medium     

Performance optimization of critical nets through active shielding

We propose the concept of active shields-shields that switch concurrently with a signal wire of interest. Active shields aid signal transitions through the coupling between the signal wire and shields. For RC dominated wires, the active shields switch in the same phase as the signal wire since capacitive coupling is the dominant coupling mechanism. For wires with dominant inductive coupling, active shields switch in the opposite phase of the signal wire. We show that under fixed area and input capacitance constraints, in-phase active shielding outperforms traditional (passive) shielding and wire sizing/spacing techniques for minimizing delays and transition times on RC-dominated wires. For RLC wires, we demonstrate a region of feasibility (in terms of signal wire widths) for which opposite-phase active shielding outperforms the passive shielding technique. Opposite-phase active shielding suppresses ringing behavior to a greater degree than passive shields, providing similar performance to differential signaling while maintaining the simplicity of single ended signaling. The benefits of opposite-phase active shielding as compared to passive shielding are shown in the context of various clock net optimizations where reductions in ringing behavior (up to 4.5X) and transition times (up to 40% reduction) are achieved.     

An audit of fatal acute pancreatitis

Acute pancreatitis has a mortality of about 10%: this figure has not changed over the last 20 years. A retrospective audit of fatal acute pancreatitis was performed in a teaching hospital with a catchment population of about 750,000 patients to examine patient characteristics. Using Hospital Activity Analysis code 577.0, all fatal cases of acute pancreatitis were studied in a six-year period 1987-93. Additionally, all post mortem diagnoses of acute pancreatitis were traced. The overall post mortem rate in Nottingham at the time of the study was about 35%. All available records, X-ray and biochemical data were studied and appropriate information recorded and analysed for 65 fatal cases. Only 15% were post mortem diagnoses, lower than in previous series; 72% had respiratory and 67% had renal complications. Only 34% had been admitted to the intensive care unit. A third of patients had had surgery; 67% of these was some form of external drainage. Of the 14 patients with proven gallstone pancreatitis only three had endoscopic retrograde cholangiopancreatography; 42% of patients had idiopathic disease. Not all the patients diagnosed ante mortem had the full biochemical predicted severity criteria analysed: pO2 and calcium analysis was performed in about 80%. Pre-mortem diagnoses of pancreatitis was achieved more frequently than in other comparable series.     

Propagation of sonic discontinuities in ideal gases

The growth or decay of a plane, cylindrical or spherical sonic discontinuity, moving in a nonhomogeneous gas in isentropic equilibrium under external forces, is discussed. It is shown that a compressive sonic discontinuity can decay under suitable conditions.     

A computational analysis of the impact of mass transport and shear on three-dimensional stem cell cultures in perfused micro-bioreactors

In this study, Computational Fluid Dynamics(CFD) is used to investigate and compare the impact of bioreactor parameters(such as its geometry, medium flow-rate, scaffold configuration) on the local transport phenomena and, hence, their impact on human mesenchymal stem cell(hM SC) expansion. The geometric characteristics of the TissueFlex174;(Zyoxel Limited, Oxford, UK) microbioreactor were considered to set up a virtual bioreactor containing alginate(in both slab and bead configuration) scaffolds. The bioreactor and scaffolds were seeded with cells that were modelled as glucose consuming entities. The widely used glucose medium, Dulbecco's Modified Eagle Medium(DMEM), supplied at two inlet flow rates of 25 and 100 μl·h~(-1), was modelled as the fluid phase inside the bioreactors. The investigation, based on applying dimensional analysis to this problem, as well as on detailed three-dimensional transient CFD results, revealed that the default bioreactor design and boundary conditions led to internal and external glucose transport, as well as shear stresses, that are conducive to h MSC growth and expansion. Furthermore, results indicated that the ‘top-inout' design(as opposed to its symmetric counterpart) led to higher shear stress for the same media inlet rate(25 μl·h~(-1)), a feature that can be easily exploited to induce shear-dependent differentiation. These findings further confirm the suitability of CFD as a robust design tool.     

Selective,Green Synthesis of Six‐Membered Cyclic Carbonates by Lipase‐Catalyzed Chemospecific Transesterification of Diols with Dimethyl Carbonate

A facile and green synthesis of six‐membered cyclic carbonates, the potential monomers for isocyanate‐free polyurethanes and polycarbonates, was achieved by transesterification of diols with dimethyl carbonate catalyzed by immobilized Candida antarctica lipase B, Novozym®435, followed by thermal cyclization in a solvent‐free medium. The difference in the chemospecificity of the lipase for the primary, secondary and tertiary alcohols as acyl acceptors was utilized to obtain a highly chemoselective synthesis of the cyclic carbonate in high yield. In the lipase‐catalyzed reaction with diols, the product contained almost equal proportions of mono‐ and di‐carbonates with 1,3‐propanediol having two primary alcohols, a higher proportion of mono‐carbonate with 1,3‐butanediol having a primary and a secondary alcohol, and mainly mono‐carbonate with 3‐methyl‐1,3‐butanediol having a primary and a tertiary alcohol. The chemospecificity of cyclic carbonates formed by thermal treatment at 90 °C was closely related to the proportion of mono‐carbonate. The yield of cyclic carbonate was 99.3% with 3‐methyl‐1,3‐butanediol, 85.5% with 1,3‐butanediol, and 43.2% with 1,3‐propanediol.