Oxygen permeation of various archetypes of oxygen membranes based on BSCF

Ba_0.5Sr_0.5Co_0.8Fe_0.2O_3‐δ tubes, capillaries, capillary modules, and asymmetric membranes were prepared and tested for oxygen permeation in a dead‐end vacuum operation mode at temperatures up to 850^°C. The capillary module was built up by reactive air brazing using seven capillaries and a supply tube. Two machined discs were used as an end cap and as a connector plate. The oxygen permeation behaves according to Wagner at small driving forces, but significant negative deviations were observed for asymmetric membranes and single capillaries at higher ones. This is caused by pressure drops at the vacuum side for single capillaries. The highest oxygen flux was revealed for the capillary module with 175.5 mL(STP)/min at a low‐vacuum pressure of 0.042 bar at 850^°C, but the asymmetric membrane showing a little bit higher flux at moderate vacuum pressures above 0.07 bar. © 2012 American Institute of Chemical Engineers AIChE J, 58: 3195–3202, 2012     

Relaxation Pathways in Metallic Glasses

At temperatures below the glass transition temperature, physical properties of metallic glasses, such as density, viscosity, electrical resistivity or enthalpy, slowly evolve with time. This is the process of physical aging that occurs among all types of glasses and leads to structural changes at the microscopic level. Even though the relaxation pathways are ruled by thermodynamics as the glass attempts to re-attain thermodynamic equilibrium, they are steered by sluggish kinetics at the microscopic level. Understanding the structural and dynamic pathways of the relaxing glassy state is still one of the grand challenges in materials physics. We review some of the recent experimental advances made in understanding the nature of the relaxation phenomenon in metallic glasses and its implications to the macroscopic and microscopic properties changes of the relaxing glass.     

Using internal domain-specific languages to inherit tool support and modularity for model transformations

Software and Systems Modeling - Model-driven engineering (MDE) has proved to be a useful approach to cope with today’s ever-growing complexity in the development of software systems;...     

House Prices as a Result of Trading Activities: A Patient Trader Model

Computational Economics - We present a new modeling approach for house price movements as a consequence of the trading behavior of market agents. In our modeling approach, all agents are assumed to...     

Dependency solving: A separate concern in component evolution management

Maintenance of component-based software platforms often has to face rapid evolution of software components. Component dependencies, conflicts, and package managers with dependency solving capabilities are the key ingredients of prevalent software maintenance technologies that have been proposed to keep software installations synchronized with evolving component repositories. We review state-of-the-art package managers and their ability to keep up with evolution at the current growth rate of popular component-based platforms, and conclude that their dependency solving abilities are not up to the task.We show that the complexity of the underlying upgrade planning problem is NP-complete even for seemingly simple component models, and argue that the principal source of complexity lies in multiple available versions of components. We then discuss the need of expressive languages for user preferences, which makes the problem even more challenging.We propose to establish dependency solving as a separate concern from other upgrade aspects, and present CUDF as a formalism to describe upgrade scenarios. By analyzing the result of an international dependency solving competition, we provide evidence that the proposed approach is viable.     

Oxidation Kinetics of an Amorphous Silicon Carbonitride Ceramic

The oxidation kinetics of amorphous silicon carbonitride (SiCN) was measured at 1350°C in ambient air. Two types of specimens were studied: one in the form of thin disks, the other as a powder. Both specimens contained open nanoscale porosity. The disk specimens exhibited weight gain that saturated exponentially with time, analogous to the oxidation behavior of reaction-bonded Si₃N₄. The saturation value of the weight gain increased linearly with specimen volume, suggesting the nanoscale pore surfaces oxidized uniformly throughout the specimen. This interpretation was confirmed by high-resolution electron microscopy and secondary ion mass spectroscopy. Experiments with the powders (having a particle size much larger than the scale of the nanopores) were also consistent with measurements of the disks. However, the powder specimens, having a high surface-to-volume ratio, continued to show measurable weight gain due to oxidation of the exterior surface. The wide range of values for the surface-to-volume ratio, which included all specimens, permitted a separation of the rate of oxidation of the free surface and the oxidation of the internal surfaces of the nanopores. Surface oxidation data were used to obtain the rate constant for parabolic growth of the oxidation scale. The values for the rate constant obtained for SiCN lay at the lower end of the spectrum of oxidation rates reported in the literature for several Si₃N₄ and SiC materials. Convergence in the behavior of SiCN and CVD-SiC is ascribed to the purity of both materials. Conversely, it is proposed that the high rates of oxidation of sintered polycrystalline silicon carbides and nitrides, as well as the high degree of variability of these rates, might be related to the impurities introduced by the sintering aids.     

High‐Temperature Creep Behavior of Dense SiOC‐Based Ceramic Nanocomposites: Microstructural and Phase Composition Effects

In this work, dense monolithic polymer‐derived ceramic nanocomposites (SiOC, SiZrOC, and SiHfOC) were synthesized via hot‐pressing techniques and were evaluated with respect to their compression creep behavior at temperatures beyond 1000°C. The creep rates, stress exponents as well as activation energies were determined. The high‐temperature creep in all materials has been shown to rely on viscous flow. In the quaternary materials (i.e., SiZrOC and SiHfOC), higher creep rates and activation energies were determined as compared to those of monolithic SiOC. The increase in the creep rates upon modification of SiOC with Zr/Hf relies on the significant decrease in the volume fraction of segregated carbon; whereas the increase of the activation energies corresponds to an increase of the size of the silica nanodomains upon Zr/Hf modification. Within this context, a model is proposed, which correlates the phase composition as well as network architecture of the investigated samples with their creep behavior and agrees well with the experimentally determined data.