Improved method for development of parsimonious orthonormal basis filter models

One of the major advantages of orthonormal basis filter (OBF) models is that they are parsimonious in parameters. However, this is true only if appropriate type of filter and reasonably accurate dominant poles of the system are used in developing the model. An arbitrary choice of filter type and poles may lead to non-parsimonious model. While the selection of the type of filter may be simple if the damping characteristics of the system are known, finding good estimates of the dominant pole(s) of the system is not a trivial task. Another important advantage of OBF model is the fact that time delays can be easily estimated and incorporated into the model. Currently, time delay of the system is estimated from the step response of the OBF model using the tangent method. While this method is effective in estimating the time delay of systems that can be accurately modeled by first order plus time delay (FOPTD) models, the accuracy is low for systems with second- and higher-order dynamics. In this paper, a scheme is proposed that will result in parsimonious OBF model and a better estimate of time delay starting from an arbitrary set of poles.     

Deacidification of Coconut Oil by Membrane Filtration

Ultrafiltration (UF) of coconut oil was carried out using a Millipore membrane cell at different pressures (0.1–0.4 MPa) and with different molecular weight cutoff membranes, that is,YM-1 (1 kDa), YM-3 (3 kDa), YM-10 (10 kDa), YM-30 (30 kDa), and PLTK-30 (30 kDa). Reduction of free fatty acids (FFAs) was 93.6%, 92.7%, 83.5%, 82.6%, and 81.6% with ethanol, methanol, acetone, n-propanol, and isopropyl alcohol, respectively, in three-stage filtration. The effects of temperature and applied pressure on the permeate flux and oil rejection were also studied with membranes using multistage filtration. As pressure increased from 0.1 to 0.4 MPa, the permeate flux and oil rejection increased linearly. A significant reduction of FFA was observed, which is in proportional with the amount of solvent in the feed used. The oil loss was less at lower temperature (25 °C) and pressure (0.2 MPa). Using PLTK 30 membrane with three-stage filtration, reduction of FFA was achieved up to 93% and 94% with methanol and ethanol solvents, respectively.     

Silver Loaded Nanofibrous Curdlan Mat for Diabetic Wound Healing: An In Vitro and In Vivo Study

A fibrous scaffold of curdlan/poly(vinyl alcohol) (PVA) blend is prepared by electrospinning technique and antimicrobial property is imparted to it by the addition of silver nitrate (1, 3, and 5 wt%). All the scaffolds except the PVA/curdlan with 5 wt% AgNO₃ show good viability of Swiss 3T3 fibroblast cells. Significant reductions in the growth of Staphylococcus aureus and Escherichia coli are also observed in all the scaffolds. In vitro scratch assay and cell adhesion studies indicate that the scaffold containing 1% AgNO₃ shows significant wound healing and better cell spreading. The in vivo results also show faster healing of excision wounds in diabetic rats treated with the same material when compared to the control and the commercial sample. Furthermore, downregulation of proinflammatory cytokines and upregulation of anti‐inflammatory cytokines on the skin of the treated animals confirm that PVA/curdlan/1% AgNO₃ electrospun mat could be a promising material for diabetic wound healing.     

7Li nuclear magnetic resonance study for the determination of Li+ properties in neuroblastoma SH-SY5Y cells

Lithium has been used clinically in the treatment of manic depression. However, its pharmacologic mode of action remains unclear. Characteristics of Li+ interactions in red blood cells (RBCs) have been identified. We investigated Li+ interactions on human neuroblastoma SH-SY5Y cells by developing a novel 7Li NMR method that provided a clear estimation of the intra- and extracellular amounts of Li+ in the presence of the shift reagent thulium-1,4,7,10-tetrazacyclododecane-N,N',N',N'-tetramethylene phosphonate (HTmDOTP4-). The first-order rate constants of Li+ influx and efflux for perfused, agarose-embedded SH-SY5Y cells in the presence of 3 mM HTmDOTP4- were 0.055 +/- 0.006 (n = 4) and -0.025 +/- 0.006 min(-1) (n = 3), respectively. Significant increases in the rate constants of Li+ influx and efflux in the presence of 0.05 mM veratridine indicated the presence of Na+ channel-mediated Li+ transport in SH-SY5Y cells. 7Li NMR relaxation measurements showed that Li+ is immobilized more in human neuroblastoma SH-SY5Y cells than in human RBCs.     

Temperature and Stress Distributions in a Hollow Cylinder of Functionally Graded Material: The Case of Temperature-Independent Material Properties

We have presented a numerical technique for analyzing one-dimensional transient temperature distributions in a circular hollow cylinder that was composed of functionally graded ceramic–metal-based materials, without considering the temperature-dependent material properties. The functionally graded material (FGM) cylinder was assumed to be initially in a steady state of gradient temperature; the ceramic inner surface was exposed to high temperature, and the metallic outer surface, which was associated with its in-service performance, was exposed to low temperature. Then, the FGM cylinder was cooled rapidly on the ceramic surface of the cylinder, using a cold medium. The transient temperature and related thermal stresses in the FGM cylinder were analyzed numerically for a model of the mullite–molybdenum FGM system. The technique for analyzing the temperature distribution is quite simple and widely applicable for various boundary conditions of FGMs, in comparison with methods that have been proposed recently by other researchers.     

Highly basic CaO nanoparticles in mesoporous carbon materials and their excellent catalytic activity

Highly basic CaO nanoparticles immobilized mesoporous carbon materials (CaO-CMK-3) with different pore diameters have been successfully prepared by using wet-impregnation method. The prepared materials were subjected to extensive characterization studies using sophisticated techniques such as XRD, nitrogen adsorption, HRSEM-EDX, HRTEM and temperature programmed desorption of CO2 (TPD of CO2). The physico-chemical characterization results revealed that these materials possess highly dispersed CaO nanoparticles, excellent nanopores with well-ordered structure, high specific surface area, large specific pore volume, pore diameter and very high basicity. We have also demonstrated that the basicity of the CaO-CMK-3 samples can be controlled by simply varying the amount of CaO loading and pore diameter of the carbon support. The basic catalytic performance of the samples was investigated in the base-catalyzed transesterification of ethylacetoacetate by aryl, aliphatic and cyclic primary alcohols. CMK-3 catalyst with higher CaO loading and larger pore diameter was found to be highly active with higher conversion within a very short reaction time. The activity of 30% CaO-CMK3-150 catalyst for transesterification of ethylacetoacetate using different alcohols increases in the following order: octanol > butanol > cyclohexanol > benzyl alcohol > furfuryl alcohol.     

Growth of unidirectional potassium dihydrogen orthophosphate single crystal by SR method and its characterization

Unidirectional <100> potassium dihydrogen orthophosphate (KDP) single crystals were grown for the first time by Sankaranarayanan-Ramasamy (SR) method. The <100> oriented seed crystals were mounted at the bottom of the glass ampoules and the crystal of 15 mm diameter, 65 mm height were grown by SR method. The grown crystals were characterized by high-resolution X-ray diffraction (HRXRD), etching studies. The HRXRD analysis indicates that the crystalline perfection is excellent without having any very low angle internal structural grain boundaries. Dislocation density is less in SR grown KDP compared to conventional method grown KDP.     

Investigations on nucleation thermodynamical parameters of NdBa2Cu3O7-δ (Nd123) crystallization by high temperature solution growth

Investigations on nucleation thermodynamical parameters are very essential for the successful growth of good quality single crystals from high temperature solution. A theoretical estimation of the nucleation thermodynamical parameters like interfacial energy between the solid Nd123 and its flux BaO-CuO, metastable zone-width, Gibbs free energy, critical energy barrier for nucleation and critical nucleation radius have been calculated from the knowledge of solubility data and by applying the classical nucleation theory. Results are discussed to understand the growth kinetics of Nd123 crystals. Paper presented at the 5th IUMRS ICA98, October 1998, Bangalore