Characterization of aromatic compounds and biological activities of essential oils from Tunisian aromatic plants

The aromatic compounds and biological activities of essential oils from six Tunisian aromatic plants including Artemisia herba-alba, Rosmarinus officinalis, Thymus capitatus, Mentha piperita, Ocimum basilicum and Artemisia absinthium were investigated. Hydro-distillation was used to extract essential oil from these plants. The identification of compounds from essential oils was performed using GC–MS analysis. Camphor (28.47%) was the major compound of A. absinthium essential oil. High contents of verbenone (20.99%) and camphor (19.72%) were found in R. officinalis. In the case of T. capitatus, carvacrol (81.09%), gamma terpinene (6.61%) and caryophyllene (4.87%) were identified as the major compounds. While eugenol (24.69%), linalool (18.00%) were characteristic compounds of O. basilicum essential oil, camphor (39.10%) and farnesol (14.25%) together with bornyl acetate (12.31%) were the main constituents of A. absinthium. These oils were also subjected to a screening for their antioxidant activity and essential oil from A. absinthium showed a greater antioxidant activity (IC₅₀?=?0.0063 mg/mL) compared to the standard Vitamin E (IC₅₀?=?0.019 mg/mL). The antibacterial activities of the oils against seven pathogenic strains, Pseudomonas aeruginosa, Bacillus cereus, Salmonella, Klebsiella pneumoniae, Escherichia coli, Staphylococcus aureus, Enterococcus faecalis and Micrococcus luteus, were tested. The highest and broadest activity was shown by M. piperita; however, Ocimum basilicum was inactive against all strains. Essential oils were also evaluated for antidiabetic and anti-acetylcholinesterase activities. The IC₅₀ values of A. herba-alba and O. basilicum against α-amylase were respectively 17.76 and 16.32 µg/mL suggesting a powerful anti-diabetic effect comparable to that of acarbose (IC₅₀?=?14.88 µg/mL). R. officinalis, M. piperita and A. absinthium exhibited an interesting acetylcholinesterase inhibition with IC₅₀ equal to 22, 24 and 58 µg/mL respectively.     

The impact of supplementing goats' milk with quinoa extract on some properties of yoghurt

This study investigated the impact of supplementing goats' milk with quinoa extracts, in the range of 5, 10 and 15 g/100 g on the milk fermentation. The properties of yoghurt produced from this milk, which include viscosity, microstructure and sensory acceptability, were assessed. The supplementation of goats' milk with quinoa extracts, particularly permeate extract, reduced the fermentation time and enhanced the viability of lactic acid bacteria. Supplementation of yoghurt with increased levels of quinoa extracts increased the apparent viscosity and changed the yoghurt protein matrix. Panellists highly accepted the yoghurt that contained quinoa permeate extract.     

Inhibition of enterotoxicogenic strains Bacillus cereus GT1 and Staphylococcus aureus S1 isolated from double white cream cheese

In this study three different food preservatives (sodium nitrate, sodium benzoate and sodium sorbate) were used to evaluate their effect on two enterotoxicogenic strains (Bacillus cereus GT1 and Staphylococcus aureus S1). A significant decrease in the viability and production of virulence factors was observed. Yet, obvious tolerance to increasing concentrations (from 1 to 6?g/l) of the three preservatives was recorded reflecting possible resistance mechanisms within the tested strains. The two strains were subjected to increasing doses of gamma radiation (1, 2, 3, 4, 5, 6, 7, 8, 9 and 10?kGy). Obvious correlation was observed between the initial counts of bacterial spores contaminating the products and the required dose for their complete elimination. Whereas the eliminating dose of B. cereus GT1 strain was 10?kGy only 4?kGy was sufficient to suppress the growth and virulence of S. aureus S1, reflecting its sensitivity to low doses of gamma irradiation. Also, inhibition of the two strains by probiotic strain Bacillus pumilus G4 was studied both in situ (in cheese) and in vitro (in culture media). The viable cell population of B. cereus GT1 increased from 10⁶ to 2.9?×?10⁸?CFU/g within 60?h in controls but decreased from 2.1?×?10⁶ to 2.3?×?10³?CFU/g after treatment with the probiotic strain. No viable count was observed after 60?h of incubation. Whereas, the viable cell population of S. aureus S1 increased from 10⁶ to 2.5?×?10⁸?CFU/g within 60?h in controls but decreased from 1.5?×?10⁶ to 4.3?×?10²?CFU/g after treatment with the probiotic strain. No viable count was observed after 54?h of incubation.     

Assessment of a regulatory sanitization process in Egyptian dairy plants in regard to the adherence of some food-borne pathogens and their biofilms

Food-borne pathogens may develop certain strategies that enable them to defy harsh conditions such as chemical sanitization. Biofilm formation represents a prominent one among those adopted strategies, by which food-borne pathogens protect themselves against external threats. Thus, bacterial biofilm is considered as a major hazard for safe food production. This study was designed to investigate the adherence and the biofilm formation ability of some food-borne pathogens on stainless steel and polypropylene surfaces using chip assay, and to validate regular sanitizing process (sodium hypochlorite 250mg/L) for effective elimination of those pathogens. Sixteen pathogenic bacterial strains, previously isolated from raw milk and dairy products at Zagazig city, Egypt (9 Staphylococcus aureus, 4 Cronobacter sakazakii and 3 Salmonella enterica serovar Typhimurium), were chosen for this study. Strains showed different patterns of adherence and biofilm formation on tested surfaces with minor significance between surfaces. The ability of sodium hypochlorite to completely eradicate either adhered or biofilm-embedded pathogens varied significantly depending on the strain and type of surface used. Whilst, sodium hypochlorite reduced tested pathogens counts per cm(2) of produced biofilms, but it was not able to entirely eliminate neither them nor adherent Cronobacter sakazakii to stainless steel surface. This study revealed that biofilm is considered as a sustainable source of contamination of dairy products with these pathogens, and also emphasized the need of paying more attention to the cleaning and sanitizing processes of food contact surfaces.     

Teff (Eragrostis tef) processing,utilization and future opportunities: a review

The demand for food production has been constantly increasing due to rising population. In developed countries, for example, the emergence of regional production of old grains that are rarely utilized, along with the production of commonly consumed grains, has gained importance in recent years. These grains, known collectively as ancient or heirloom grains, have offered both farmers and consumers novel ways of cultivation and products with interesting taste, characteristics and nutritional value. Among the 30 000 plant species known, only five cereals currently provide more than 50% of the world's energy intake – bread wheat (Triticum aestivum), rice (Oryza sativa), sorghum (Sorghum bicolor), millets (Panicum sp.) and maize (Zea mays). The excessive utilization of these selected species has a great potential to cause genetic losses and difficulty in bridging future agricultural demands. Teff (Eragrostis tef), an ancient grain extensively cultivated in countries like Eritrea and Ethiopia, provides promising alternatives for new food uses since its nutritional value is significantly higher than most others cereal grains. The absence of gluten allows flexibility in food utilization since it can be directly substituted to gluten-containing products. The grain also offers an excellent balance of essential amino acids and minerals, which can fulfil the recommended daily intake and eliminates the need for fortification and enrichment. This review provides a general overview of the physical properties and nutritional composition of teff grains related to processing and applications in the food and feed industries. The current status of teff utilization, as well as the challenges in production and commercialization, and future opportunities is presented and discussed.     

Investigation of gear performance of MLNGPs as an additive on polyamide 6 spur gear

Molded plastic gears have long provided an alternative to metal gears in lightly loaded drives. They transmit power quietly and often without lubrication in numerous applications, furthermore decrease the quantity of parts and oppose chemicals in numerous applications. Previously, plastic gears were restricted to to 0.25 hp because of varieties in their properties and uncertainties about how they react to natural conditions such as moisture, temperature and chemical. Today, better molding controls combined with design practices that more accurately encompass environmental factors have boosted plastic gear drive capacity to 1.5 hp. Using reinforcement this is standout amongst the most practices to enhance the gear performance.

This study estimated the effects of multilayer graphene nanoplatelets (MLNGPs) as an additive on polyamide 6 (PA6) spur gear performance. These include strength, elastic modulus, thermal stability, dynamic mechanical analysis, moisture absorption, and wear characteristics.The nanocomposite gear was made by melt mixing method and injection moulded into thick flanges. The flanges were machined using CNC milling machine to produce spur gear. The wear experiments were performed at a running speed of 1400 rpm and at torques of 13 and 16 Nm with different concentration 0, 0.1, 0.3 and 0.5 wt% MLNGPs using test rig. The result showed that 0.3% of MLGNPs is the optimum concentration. Young's modulus increased up to 40%, Vickers microhardness value increased up to 25%, storage modulus E’ is increased up to 37% and glass transition temperature is increased up to 14%. On the other hand TGA result shows that the Tonest increased up to 7.5% and Td increased up to 2%, and wear decreased by 35% at 16 Nm and 54% at 13 Nm.     

Magneto‐Thermal Metrics Can Mirror the Long‐Term Intracellular Fate of Magneto‐Plasmonic Nanohybrids and Reveal the Remarkable Shielding Effect of Gold

Multifunctional nanoparticles such as magneto‐plasmonic nanohybrids are rising theranostic agents. However, little is yet known of their fate within the cellular environment. In order to reach an understanding of their biotransformations, reliable metrics for tracking and quantification of such materials properties during their intracellular journey are needed. In this study, their long‐term (one month) intracellular fate is followed within stem‐cell spheroids used as tissue replicas. A set of magnetic (magnetization) and thermal (magnetic hyperthermia, photothermia) metrics is implemented to provide reliable insightsinto the intracellular status. It shows that biodegradation is modulated by the morphology and thickness of the gold shell. First a massive dissolution of the iron oxide core (nanoflower‐like) is observed, starting with dissociation of the multigrain structure. Second, it is demonstrated that an uninterrupted gold shell can preserve the magnetic core and properties (particularly magnetic hyperthermia). In addition to the magnetic and thermal metrics, intracellular high‐resolution chemical nanocartography evidences the gradual degradation of the magnetic cores. It also shows different transformation scenarios, from the release of small gold seeds when the magnetic core is dissolved (interesting for long‐term elimination) to the protection of the magnetic core (interesting for long‐term therapeutic applicability).     

Stochastic Simulation of Construction Bidding and Project Management

Abstract: A stochastic simulation model of a project management game was developed to assist in training estimators in developing bidding strategies in construction. This paper discusses the development of the conceptual gaming model for bidding on construction projects and the implementation of the model on portable software. The model simulates the actual bidding in construction by creating projects, initiating random phenomena, and keeping track of the performance of the individual players of the game. Upon conclusion of the game the winner is selected as the player that maximizes his relative return on the original investment assigned to him by the game. The paper describes the underlying construction management concepts and the bidding process in general. The database management model is then detailed focusing on the requirements and strategy behind the development of the various databases. The paper also describes the various models utilized in simulating the involved random processes. Finally the operation of the program is introduced and its use in educating construction engineers and managers is highlighted.     

Designing erosion management plans in Lebanon using remote sensing, GIS and decision-tree modeling

Soil erosion by water represents a serious threat to the natural and human environment in Mediterranean countries, including Lebanon, which represents a good case study. This research deals with how to use Geographic Information Systems (GIS), remote sensing, and, more specifically, structural classification techniques and decision-tree modeling to map erosion risks and design priority management planning over a representative region of Lebanon. The structural classification organization and analysis of spatial structures (OASIS) of Landsat TM satellite imagery (30 m) was used to define landscapes that prevail in this area and their boundaries, depending on their spectral appearance. The landscape map produced was overlaid sequentially with thematic erosion factorial maps (i.e., slope gradient, drainage density, rainfall quantity, vegetal cover, soil infiltration, soil erodibility, rock infiltration and rock movement). The overlay was visual and conditional using three visual interpretation rules (dominance, unimodality and scarcity conservation), and landscape properties were produced. Rills and gullies were measured in the field, and a decision-tree regression model was developed on the landscapes to statistically explain gully occurrence. This model explained 88% of the variability in field gully measurements. The erosion risk map produced corresponds well to field observations (accuracy of 82%). The landscapes were prioritized according to anti-erosive remedial measures: preventive (Pre), protective (Pro), and restorative (Res). This approach seems useful in Lebanon, but can also serve in other countries with similar geo-environmental conditions or those lacking detailed geospatial data.     

Development and application of C60-fullerene bound silica for solid-phase extraction of biomolecules

Sample pretreatment is the most important procedure to remove the matrix for interfacing with mass spectrometry (MS). Additionally, for the samples with low concentration, the process of preconcentration is required before MS analysis. We have newly developed a solid-phase extraction stationary phase based on C60-fullerene covalently bound to silica for purification of biomolecules of different characteristics. Silica particles of different porosity are modified with aminopropyl linker and then covalently bound to C60-fullerenoacetic acid or C60-epoxyfullerenes. The developed materials have been successfully applied as an alternative to commercially available reversed-phase materials for solid-phase extraction. C60-fullerene silica is able to retain small and hydrophilic molecules like phosphopeptides, which can be easily lost by reversed-phase sorbents. The novel materials are applied for desalting and preconcentration of proteins and peptides, especially phosphopeptides. In addition, the C60-fullerene silica is applied for the solid-phase extraction of selected flavonoids with recoveries of approximately 99%. The recoveries are compared with the commercially available solid-phase extraction materials.