Cross-cultural differences in recognizing affect from body posture

Conveyance and recognition of human emotion and affective expression is influenced by many factors, including culture. Within the user modeling field, it has become increasingly necessary to understand the role affect can play in personalizing interactive interfaces using embodied animated agents. However, little research within the computer science field aims at understanding cultural differences within this vein. Therefore, we conducted a study to evaluate if differences exist in the way various cultures perceive emotion from body posture. We used static posture images of affectively expressive avatars to conduct recognition experiments with subjects from three cultures. After analyzing the subjects' judgments using multivariate analysis, we grounded the identified differences into a set of low-level posture features. We then used Mixture Discriminant Analysis (MDA) and an unsupervised expectation maximization (EM) model to build separate cultural models for affective posture recognition. Our results could prove useful to aide designers in creating more effective affective avatars.     

Foot shape modeling

This study is an attempt to show how a "standard" foot can be parameterized using foot length, foot width, foot height, and a measure of foot curvature so that foot shape can be predicted using these simple anthropometric measures. The prediction model was generated using 40 Hong Kong Chinese men, and the model was validated using a different group of 25 Hong Kong Chinese men. The results show that each individual foot shape may be predicted to a mean accuracy of 2.1 mm for the left foot and 2.4 mm for the right foot. Application of this research includes the potential design and development of custom footwear without the necessity of expensive 3-D scanning of feet.     

Generation of Inequivalent Generalized Bell Bases

The notion of equivalence of maximally entangled bases of bipartite d–dimensional Hilbert spaces _{d d} is introduced. An explicit method of inequivalent bases construction is presented. PACS: 03.67.-a     

Conformations of gas-phase lysozyme ions produced from two different solution conformations

Near pH 2.0, lysozyme in water is in its native conformation, and in water/methanol (2/8) it adopts a helical denatured conformation (Kamatari et al. Protein Sci. 1998, 7, 681-688). Hydrogen/deuterium (H/D) exchange of lysozyme in solution confirms that it is partially unfolded at pH 2.0 in water/methanol (v/v = 2/8). With electrospray ionization (ESI) mass spectrometry (MS), lysozyme in water produces ions with charges +7 to +12, with the greatest intensity at +10, whereas lysozyme in water/methanol (2/8) produces ions with charges +6 to +12 with the greatest intensity at +7. Thus, lysozyme is an exception to the rule that a protein denatured in solution forms higher charge states than the same protein in its folded native conformations in solution. Because the same charge states are produced from these two solution conformations, a direct comparison of the properties of the gas-phase ions produced from two very different solution conformations is possible. The conformations of lysozyme ions in the gas phase were studied using cross section measurements and gas-phase H/D exchange. Similar cross sections and H/D exchange levels were observed for same-charge states of lysozyme ions formed from the native and helical denatured conformations in solution. Cross sections show that the ions have compact structures. Thus, disulfide-intact gaseous lysozyme ions generated from the denatured state in water/methanol (2/8) refold into compact structures in the gas phase on a time scale of milliseconds or less.     

Optical and electrical characterization of conducting polymer-single walled carbon nanotube composite films

The optical and electrical properties of the conducting polymer poly(3-hexylthiophene) and single walled carbon nanotube (SWCNT) composites have been investigated. The composites were prepared by dispersing carbon nanotubes in the polymer matrix already dissolved in 1,2-dichlorobenzene. The optical absorption, photoluminescence (PL) and electrical conductivity of the composite was studied as a function of SWCNT concentration in the solution. The absorption coefficient of the polymer was found to be unaffected upto a SWCNT concentration 5% w/w. However a minor decrease in the absorption in visible region was observed for higher SWCNT concentrations. The intensity of PL emission from the composite was measured and was found to decrease with the increase in SWCNT concentration. For a SWCNT concentration of 30% w/w, ∼90% of the PL was quenched, indicating an ultra fast transfer of photoinduced charges from donor polymer to acceptor SWCNT. Direct current conductivity of the composite film was found to increase rapidly with the increase in SWCNT concentration and an increase of ∼5 orders of magnitude was observed for a 30% w/w concentration. The enhancement in conductivity is explained in terms of percolation theory with an estimated percolation threshold of 2% w/w.     

Studies on Hot Corrosion of the Microstructurally Different Regions of 2.25Cr-1Mo (T22) Boiler Tube Steel Weldment

This study examines the effect of microstructurally different regions on the hot corrosion of tungsten inert gas weldment in 2.25Cr-1Mo (T22) boiler tube steel. Various regions of weldment were oxidized in molten salt Na₂SO₄-60% V₂O₅ environment at 900 °C. The base metal was found to oxidize at much higher rates than the weld metal and the heat-affected zone. Oxide scales formed in the three regions were compared by scanning electron microscopy with energy dispersive of X-ray analysis, X-ray diffraction pattern, and electron probe microanalysis. The research investigates the formation of inner scales with free Cr over the HAZ.     

Nitrophenoxy groups containing polybenzimidazoles as polymer electrolytes for fuel cells: Synthesis and characterization

Polybenzimidazoles containing different contents of pendant nitrophenoxy groups were prepared by condensation of 3,3′‐diamino‐benzidine with a mixture of 3,5‐dicarboxyl‐4′‐nitro diphenyl ether and isophthalic acid (IPA) in different ratios in polyphosphoric acid. The polymers are soluble in polar aprotic solvents, they have inherent viscosities in the range of 0.75–1.10 dL g^?1 and they form tough and transparent films on solution casting. They have good thermal stability with initial decomposition temperature ranging from 380 to 416°C in nitrogen, good tensile strength ranging from 56 to 65 MPa and reasonably good oxidative stability. Phosphoric acid uptake of these polymers is low compared with PBI and membranes doped with phosphoric acid exhibit good proton conductivity in the range of 6.6× 10^?3 to 1.9× 10^?2 S/cm at 25°C and 1.2× 10^?2 to 4.9× 10^?2 S/cm at 175°C, compared with 3.9× 10^?3 S/cm at 25°C and 3.2× 10^?2 S/cm at 175°C for PBI. These membranes are suitable for applications as polymer electrolyte for fuel cell and presumably for gas separation at high temperature. © 2010 Wiley Periodicals, Inc. J Appl Polym Sci, 2010     

Comparison of alginate and pectin based beads for production of poultry probiotic cells

A comparative study on the stability and potential of alginate and pectin based beads for production of poultry probiotic cells using MRS medium in repeated batch fermentation was conducted. The bead cores, made of three types of materials, i.e., ca-alginate, ca-pectinate and ca-alginate/pectinate, were compared. The effect of single and double layer coatings using chitosan and core material, respectively, on the bead stability and cell production were also studied. The pectin based beads were found to be more stable than that of the alginate beads and their stability was further improved by coating with chitosan. The cell concentration in pectin based beads was comparable to that in the alginate beads. On the other hand, pectin based beads gave significantly lower cell concentration in the growth medium for the initial fermentation cycles when compared to the alginate beads. In conclusion, pectin was found to be potential encapsulation material for probiotic cell production owing to its stability and favourable microenvironment for cell growth.     

Influence of heat-stable filler on the thermal shielding performance of water-based intumescent fire-resistive coating for structural steel applications

Intumescent coatings are the newest passive fireproofing materials which maintain structural integrity of high-rise buildings in fire events. The present work focuses on the influence of zirconium silicate as a heat-stable filler in intumescent coatings. Different coatings were formulated by varying the zirconium silicate concentration from 1, 3, 5, 8, and 10 on parts per hundred basis (phr). Fire performance of the coatings was then determined by fire test using a Bunsen burner fire flame at 950°C for 1 h. The degradation of coatings was examined by thermogravimetric analysis (TGA). The morphology of the intumescent chars was analyzed by environmental scanning electron microscopy. The char was also examined by X-ray diffraction (XRD) and Fourier transform infrared spectroscopy. XRD confirmed the inertness of zirconium silicate with intumescent ingredients at high temperatures. TGA showed an increase in the weight residue of char at high temperature. The incorporation of zirconium silicate into intumescent coating forms a thermally stable char with better substrate adhesion. EDS analysis confirmed an increase in the antioxidation property of the char, and the fire test also confirmed an increase in char strength of coatings by the incorporation of zirconium silicate.