Measurements of normal boiling points of fatty acid ethyl esters and triacylglycerols by thermogravimetric analysis

At present, a large number of studies of biodiesel production process using simulation packages are being developed. In these studies, vegetable oils and biodiesels are characterized in the software through representative compounds because of they are not in the compounds database of commercial simulators. With the aim to achieve a successfully characterization in these kinds of software, some properties of the substances must be available. The normal boiling point (NBP) is the most important property due to the fact that this property along with group contribution methods allows other properties calculation such as, e.g., critical properties and temperature dependency properties. In this work, a thermogravimetric analysis (TGA) method for rapid measurement of normal boiling points of two triacylglycerols and four ethyl esters, i.e., triolein, tripalmitin, ethyl oleate, ethyl palmitate, ethyl linoleate and ethyl ricinoleate, was used. Nowadays, in the open literature exists few data available about ethyl esters properties; hence, the results obtained here will contribute in the proposal, analysis, and evaluation of ethyl esters (biodiesel) virtual plants using reliable simulation packages. In addition, a more accurate characterization of compounds and therefore more accurate simulation results can be obtained when they are used.     

Evaluation of the interaction between sodium hypochlorite and several formulations containing chlorhexidine and its effect on the radicular dentin—SEM and push‐out bond strength analysis

The aim of the current study was to evaluate the presence of debris and smear layer after endodontic irrigation with different formulations of 2% chlorhexidine gluconate (CHX) and its effects on the push‐out bond strength of an epoxy‐based sealer on the radicular dentin. One hundred extracted human canines were prepared to F5 instrument and irrigated with 2.5% sodium hypochlorite and 17% ethylenediaminetetraacetic acid. Fifty teeth were divided into five groups (n = 10), according to the final irrigation protocol with different 2% CHX formulations: G1 (control, no final rinse irrigation), G2 (CHX solution), G3 (CHX gel), G4 (Concepsis), and G5 (CHX Plus). In sequence, the specimens were submitted to scanning electron microscopy (SEM) analysis, in the cervical‐medium and medium‐apical segments, to evaluate the presence of debris and smear layer. The other 50 teeth were treated equally to a SEM study, but with the root canals filled with an epoxy‐based endodontic sealer and submitted to a push‐out bond strength test, in the cervical, middle, and apical thirds. G2, G3, G4, and G5 provided higher precipitation of the debris and smear layer than G1 (P < 0.05), but these groups were similar to each other (P > 0.05), in both segments. The values obtained in the push out test did not differ between groups, independent of the radicular third (P > 0.05). The CHXs formulations caused precipitation of the debris and smear layer on the radicular dentin, but these residues did not interfere in the push‐out bond strength of the epoxy‐based sealer. Microsc. Res. Tech. 77:17–22, 2014. © 2013 Wiley Periodicals, Inc.     

Endotracheal tube biofilm and ventilator‐associated pneumonia with mechanical ventilation

Objective: To analyze biofilm on internal and external surfaces of endotracheal tubes after their use in critical care patients, and to produce evidence of association between use of the tube, presence of biofilm, and the occurrence of pneumonia. Methods: This was a clinical study performed at the Intensive Care Unit of an emergency hospital in the interior of São Paulo state, Brazil. Data collection involved 30 endotracheal tubes used on adult patients for a period of ≥48 h of mechanical ventilation for scanning electron microscopy. Results: Analysis of the biofilm on the 30 tubes by scanning electron microscopy showed various abiotic and biotic structures, predominately on the internal surface, such as: fibrin network, erythrocytes, leukocytes, cocci, bacilli, and molds, among others. The intubation period of the endotracheal tube for ≥8 days represented one of the risk factors for ventilator‐associated pneumonia (RR 7.41, P < 0.001). Conclusions: The presence of the endotracheal tube permits microbial colonization, overall contributing to the development of biofilm and the occurrence of pneumonia. Microsc. Res. Tech. 77:305–312, 2014. © 2014 Wiley Periodicals, Inc.     

Aroma volatiles recovered in the water phase of cashew apple (Anacardium occidentale L.) juice during concentration

BACKGROUND: There is a considerable loss of volatile compounds during the thermal concentration of cashew apple juice, damaging product quality, and as yet there is little research on the subject. Thus the purpose of this research was to identify the aroma volatiles evaporated off from cashew apple juice and recovered in the water phase during concentration of this beverage in an industrial plant. Water phase volatiles were extracted using dichloromethane, concentrated under a nitrogen flow, separated by gas chromatography (GC) and identified by GC‐mass spectrometry. In order to determine the contribution of each volatile to the cashew aroma, five trained judges evaluated the GC effluents using the Osme GC‐olfactometry technique. RESULTS: 71 volatiles were identified; of these, 47 were odour active. Alcohols were preferentially recovered in the cashew water phase, notably heptanol, trans ‐3‐hexen‐1‐ol and 3‐methyl‐1‐butanol, representing 42% of the total chromatogram area and imparting green grass and fruity aroma notes to the water phase. Esters represented 21% of the total chromatogram area, especially ethyl 2‐hydroxyhexanoate, ethyl trans ‐2‐butenoate and ethyl 2‐methylbutanoate, and were responsible for the fruity/cashew‐like aroma of the water phase. On the other hand, 3‐methylbutanoic and 2‐methylbutanoic acids were the volatiles that presented the greatest odour impact in the GC effluents of the water phase. CONCLUSION: Overall, the results of the present study strongly indicated that further concentration of the esters recovered in the water phase, either by partial distillation or by alternative technologies such as pervaporation, could generate a higher‐quality natural cashew apple essence. Copyright © 2011 Society of Chemical Industry     

Imazalil Degradation upon Applying Ozone—Transformation Products,Kinetics, and Toxicity of Treated Aqueous Solutions

The elimination of the pesticide imazalil (IMZ) spiked into ultrapure water as well as into wastewater applying ozone (O₃) and the identification of transformation products was investigated. O₃ under hydroxyl radical suppression conditions reacted rapidly with the aliphatic double bond or the imidazole ring in IMZ, yielding several transformation products by partial oxidation. The structures of four oxidation products not yet described were characterized and identified after liquid chromatography coupled with high resolution, high mass accuracy, mass and tandem mass spectrometry (LC/MS and -MSⁿ) in ultrapure water. For two identified transformation products, generated via direct ozone attack on IMZ, formation pathways were proposed. In wastewater, only two of those transformation products were observed. Kinetics studies for the reaction of IMZ with O₃, evaluated by the competition kinetic method, resulted in a second-order rate constant k_O3,IMZ ～ (1.02 ± 0.03)?×?10⁵ M^?1 s^?1 at pH 6.6 ± 0.2, indicating that IMZ is completely transformed during the ozonation process. Tests of acute toxicity were performed applying a solution of IMZ in ultrapure water or treated wastewater to Daphnia magna. In both cases the decrease of toxicity was observed after ozone treatment.     

Styrene–butadiene rubber/cellulose II/clay nanocomposites prepared by cocoagulation—mechanical properties

In this work, nanocomposites of styrene butadiene rubber (SBR), cellulose II, and clay were prepared by cocoagulation of SBR latex, cellulose xanthate, and clay aqueous suspension mixtures. The incorporated amount of cellulose II was 15 phr, and the clay varied from 0 to 7 phr. The influence of cellulose II and clay was investigated by rheometric, mechanical, physicochemical, and morphological properties. From the analysis of transmission electron microscopy (TEM), dispersion in nanometric scale (below 100nm) of the cellulosic and mineral components throughout the elastomeric matrix was observed. XRD analysis suggested that fully exfoliated structure could be obtained by this method when low loading of silicate layers (up to 5 phr) is used. The results from mechanical tests showed that the nanocomposites presented better mechanical properties than SBR gum vulcanizate. Furthermore, 5 phr of clay is enough to achieve the best tensile properties. © 2010 Wiley Periodicals, Inc. J Appl Polym Sci, 2011     

Preparation,structure, and properties of montmorillonite/cellulose II/natural rubber nanocomposites

In this work, sodium montmorillonite clay was added, as filler, to nanocomposites of natural rubber (NR) and cellulose II (regenerated cellulose) in amounts varying from 0 to 5 phr (per hundred resin). Natural rubber (NR)/cellulose II/montmorillonite nanocomposites were prepared by co‐coagulating NR latex, montmorillonite aqueous suspension and cellulose xanthate. The clay was previously exfoliated in water, and the resulting suspension was then added to the mixture of NR latex with cellulose xanthate. Morphological, rheometric, mechanical, and dynamic mechanical properties were evaluated, and an increase in these properties was observed upon the addition of cellulose and clay nanomaterials to the rubber matrix. The results show the advantage in using cellulose as a nanopolymer as well as MMT as nanofiller. © 2010 Wiley Periodicals, Inc. J Appl Polym Sci, 2011     

Degradation of an Azo Dye (Ponceau 4R) and Treatment of Wastewater from a Food Industry by Ozonation

Experiments for degradation of the extensively marketed Ponceau 4R dye in aqueous solution and for oxidation of raw wastewater from a confectionary industry have been carried out by using ozone. All the experiments were performed in a cylindrical semi-batch reactor at approximately 20 ^oC for 7200 s. A mass flow rate of 1.158?×?10^?6 kg s^?1 of ozone was continuously fed in the reactor. The pH of the azo dye aqueous solution (distilled water + Ponceau 4R) was always kept at approximately 5.8, while in the case of the raw wastewater the same factor was changed from 4.7 to 9.4 in two different experimental runs. Absorbance measurements at 508 nm show that the investigated azo dye found in the azo dye aqueous solution was completely degraded after only 600 s. At this initial period a substantial fall of TOC (Total Organic Carbon) (up to 45%) was noticed, but the rate was exponentially decreased at longer reaction times up to a TOC removal no higher than 60%. The ozonation was also responsible for reducing the apparent color of the raw wastewater to almost 10% of its initial value at the optimum pH (9.4 ± 1.5). The effect of pH was important on apparent color, but it had absolutely no influence on the kinetics results of COD (Chemical Oxygen Demand), which were kept constant over the entire period of reaction.     

Rheological Properties of Frozen Concentrated Orange Juice (FCOJ) as a Function of Concentration and Subzero Temperatures

Data on flow properties of Frozen Concentrated Orange Juice (FCOJ) produced from oranges cv. Pera-Rio (65.04 °Brix, 8.8% w/w pulp content, 2.5% w/w pectin, 3.84% citric acid, 1.293 g cm^?3) from ?18 to 0°C were fitted with appropriate predictive models. The power law model was found to be the most appropriate to fit the flow curves obtained for FCOJ between 46.56 and 65.04 °Brix. In higher concentrations, thixotropy was observed and showed more temperature dependence. A single equation combining Arrhenius and exponential relationships was applied to describe the temperature effect and shear rate on the quantity of breakdown of FCOJ.