Optical constants of electroplated Bi2Te3 films by Mueller matrix spectroscopic ellipsometry

We synthesized polycrystalline Bi_2 + xTe_3 − x (− 0.2< x <0.2) thin films by electrodeposition in acidic medium. Since Bi₂Te₃-like structure may be uniaxially anisotropic due to its rhombohedral crystallographic system, we investigated their optical behavior using ex and in situ Mueller matrix spectroscopic ellipsometry in the wavelength range of 470 to 830 nm (1.5-2.6 eV). We found that room-temperature electroplated polycrystalline appears optically isotropic and that no depolarization effect occurs from the first steps of growth until several micrometers thick films. Additional ex situ measurements permit to obtain their optical constants from far-ultraviolet to near-infrared (190-2100 nm).     

pH-controlled diffusion of proteins with different pI values across a nanochannel on a chip

Electrostatic interactions dominate the diffusion of proteins in a nanochannel, which was measured and modeled for pH values above and below the isoelectric points of three lectin proteins. Maximal diffusion coefficients were obtained when the proteins were neutral at their pI. This pH-controlled transport led to a separation of biomolecules across the nanochannel. A pI shift was observed, due to reversible adsorption of proteins on the walls, which affects the pH in the nanochannel.     

SURFACE ALLOYING OF MILD STEEL BY LASER MELTING OF AN ELECTROLESS NICKEL DEPOSIT CONTAINING CHROMIUM CARBIDES

It is possible to realize surface alloys by laser melting an electroless nickel layer containing chromium carbide particles predeposited on a mild steel substrate. By this way the surface alloy is expected to have not only a high nickel content but also an important chromium content in order to improve the corrosion resistance. The presence of chromium in solid solution results from the dissolution or melting of the carbide particles. Typical laser solidification microstructures are obtained. Dendrites consist of an austenitic Fe-Ni-Cr solid solution and interdendritic regions are constituted by an eutectic mixture containing the same austenitic solid solution and complex Fe, Ni, Cr carbides and phosphides. In comparison with a surface alloy obtained by laser melting of an electroless nickel layer without carbide particles, the corrosion resistance was slightly improved in saline aqueous solutions. The limited effect was due to the fact that the final chromium content in the present experimental conditions was not as high as that initially expected.     

INFLUENCE OF AXISYMMETRIC DEFORMATION PROCESSING METHODS ON THE MECHANICAL PROPERTIES OF Cu-Nb COMPOSITES

It has been shown that deformation processed Cu-19% Nb alloys with good strength and electrical conductivity can be developed in sizes that are useful for engineering applications. Mot extrusion of bundled sub-elemental Cu-19% Nb wires followed by cold drawing to make a composite wire of diameter equal to that of the initial sub-elemental wires resulted in a 67% increase in the ultimate tensile stress. However, on subsequent cold drawing of this composite wire the strength increased at a slower rate than that obtained on continuing cold drawing of the sub-elemental wire and the strength differential decreased. In addition, after cold drawing to equivalent diameters the electrical conductivity of the composite wire was less than that of the sub-elemental wire. These results indicate that while high strengths and good electrical conductivities can be produced in larger size deformation processed Cu-Nb composites by a process of bundling, extrusion and cold drawing of sub-elemental wires, there appears to be a limit to the amount of subsequent cold drawing feasible before the benefit in properties ceases.     

Electrochemical boron-doped diamond film microcells micromachined with femtosecond laser: application to the determination of water framework directive metals

Planar electrochemical microcells were micromachined in a microcrystalline boron-doped diamond (BDD) thin layer using a femtosecond laser. The electrochemical performances of the new laser-machined BDD microcell were assessed by differential pulse anodic stripping voltammetry (DPASV) determinations, at the nanomolar level, of the four heavy metal ions of the European Water Framework Directive (WFD): Cd(II), Ni(II), Pb(II), Hg(II). The results are compared with those of previously published BDD electrodes. The calculated detection limits are 0.4, 6.8, 5.5, and 2.3 nM, and the linearities go up to 35, 97, 48, and 5 nM for, respectively, Cd(II), Ni(II) Pb(II), and Hg(II). The detection limits meet with the environmental quality standard of the WFD for three of the four metals. It was shown that the four heavy metals could be detected simultaneously in the concentration ratio usually measured in sewage or runoff waters.     

Aerosol lidar intercomparison in the framework of the EARLINET project. 1. Instruments

In the framework of the European Aerosol Research Lidar Network to Establish an Aerosol Climatology (EARLINET), 19 aerosol lidar systems from 11 European countries were compared. Aerosol extinction or backscatter coefficient profiles were measured by at least two systems for each comparison. Aerosol extinction coefficients were derived from Raman lidar measurements in the UV (351 or 355 nm), and aerosol backscatter profiles were calculated from pure elastic backscatter measurements at 351 or 355, 532, or 1064 nm. The results were compared for height ranges with high and low aerosol content. Some systems were additionally compared with sunphotometers and starphotometers. Predefined maximum deviations were used for quality control of the results. Lidar systems with results outside those limits could not meet the quality assurance criterion. The algorithms for deriving aerosol backscatter profiles from elastic lidar measurements were tested separately, and the results are described in Part 2 of this series of papers [Appl. Opt. 43, 977-989 (2004)]. In the end, all systems were quality assured, although some had to be modified to improve their performance. Typical deviations between aerosol backscatter profiles were 10% in the planetary boundary layer and 0.1 x 10(-6) m(-1) sr(-1) in the free troposphere.     

Synthesis methods of array antenna excitation laws

Standard numerical optimization methods become very computational time consuming when dealing with synthesis of array antenna excitation laws, especially when number of elements exceeds a few tenths. Array antenna designer needs a fast and efficient synthesis tool, since the design phase implies several reoptimizations within the definition phase, in order to satisfy tradeoffs on antagonistic requirements : performances, size, cost,… We propose the use of an efficient, from the computational time point of view, and secured, from the convergence point of view, synthesis method illustrated by two examples. The optimized solution satisfies a sta-tionarity condition, which leads to steady solutions in frequency but also with regard to errors (manufacturing, …). Based on analytical calculus performed before any numerical resolution and together with the use of fast Fourier transform algorithms, this method leads to reduced optimization times (in the order of a minute) for arrays of some tenths up to some hundred feeds, computations being performed on a pc. Two theoretical applications are presented and for each of them a computed example is also shown; moreover possible extensions are considered.     

Hypercalciuria

BACKGROUND: Second- and third-generation chemotherapy protocols for the treatment of aggressive non-Hodgkin's lymphomas (NHL) have considerable, and age-related, toxic effects. In addition, they do not seem to prolong overall survival in comparison to standard CHOP chemotherapy. In this phase II study we investigated the feasibility and efficacy of the addition of etoposide to the conventional CHOP regimen. PATIENTS AND METHODS: Toxicity and clinical efficacy were determined in 132 patients with previously untreated high-grade NHL. There were 51 patients in clinical stage I and II and 81 patients in stage III and IV, with a median age of 54 years (range 17-85). Patients received standard-dose CHOP plus etoposide 100 mg/m2 i.v. on day 1 and 200 mg/m2 p.o. on days 2-3. RESULTS: The overall response rate was 84%, with 70% complete and 14% partial responses. The predicted three- and five-year survivals for the group as a whole were 60% and 53%, respectively, and the corresponding disease-free survivals for patients achieving complete remissions were 65% and 56%, respectively. Outcome was not different from that of CHOP-treated patients in a recently completed Nordic study performed during the same time period. Myelosuppression (WHO grade 3-4), observed in 87% of patients and infectious complications (WHO grade 3-4) in 33%, dominated the toxicity profile of this regimen. Fifty-seven of 92 complete responders (62%) received 6-8 CHOP-E cycles with no reductions in planned dose intensity. LDH level higher than normal, extranodal sites = 2, stage III-IV at diagnosis were all indicators of a poor survival. CONCLUSIONS: We conclude that CHOP-E treatment is effective in high-grade NHL. However, mainly due to severe myelosuppression frequent schedule modifications were required and the results are not obviously superior to those of conventional CHOP.     

Attentional control in normal aging and Alzheimer's disease.

Objective: Attentional control, the ability to maintain goal-directedness in the face of distraction, has been shown to decline in normal aging (NA) and Alzheimer's disease (AD), yet the nature and extent of deficits is under debate. This study investigated attentional control in NA and AD compared to healthy young adults in several tasks such as setting, suppressing, switching, and preparing attention. Method: Fifty-two participants (17 AD, 17 NA, and 18 young participants) underwent the Tower of London, the Zoo map test, the Stroop test, letter verbal fluency, a computerized version of the Rule shift cards tests, the Trail making test, the Plus-minus test, and a reaction time task with variable preparatory intervals. Results: Analyses of variance showed that NA as compared to young participants were impaired in the Tower of London, the Stroop test, and the Rule shift cards tests. AD as compared to NA participants were impaired in all tests except the Stroop test. Principal component analysis in young adults confirmed the modularity of attentional tasks, which was reduced in NA and AD participants. Principal component analysis in all populations showed a decline of attentional control with NA and AD regardless of the tasks, with an increase in between-participants variability only between young and NA participants. Conclusions: Attentional control dysfunction is different in NA and AD: NA affects suppressing attention, switching attention for unpredictable but not predictable events, and preparing attention for unpredictable events, whereas AD affects setting, suppressing, switching, and preparing attention with less specificity. (PsycINFO Database Record (c) 2011 APA, all rights reserved)