An overview of the development of the first wall and other principal components of a laser fusion power plant

This paper introduces the JNM Special Issue on the development of a first wall for the reaction chamber in a laser fusion power plant. In this approach to fusion energy a spherical target is injected into a large chamber and heated to fusion burn by an array of lasers. The target emissions are absorbed by the wall and encapsulating blanket, and the resulting heat converted into electricity. The bulk of the energy deposited in the first wall is in the form of X-rays (1.0-100 keV) and ions (0.1-4 MeV). In order to have a practical power plant, the first wall must be resistant to these emissions and suffer virtually no erosion on each shot. A wall candidate based on tungsten armor bonded to a low activation ferritic steel substrate has been chosen as the initial system to be studied. The choice was based on the vast experience with these materials in a nuclear environment and the ability to address most of the key remaining issues with existing facilities. This overview paper is divided into three parts. The first part summarizes the current state of the development of laser fusion energy. The second part introduces the tungsten armored ferritic steel concept, the three critical development issues (thermo-mechanical fatigue, helium retention, and bonding) and the research to address them. Based on progress to date the latter two appear to be resolvable, but the former remains a challenge. Complete details are presented in the companion papers in this JNM Special Issue. The third part discusses other factors that must be considered in the design of the first wall, including compatibility with blanket concepts, radiological concerns, and structural considerations.     

Fumonisin production and other traits of Fusarium moniliforme strains from maize in northeast Mexico

Strains of Fusarium moniliforme from maize seed collected in four fields in northeast Mexico were tested for fumonisin production in culture, for sexual compatibility, and for vegetative compatibility by using non-nitrate-utilizing mutants. The test results indicate that a diverse population of fumonisin-producing strains of F. moniliforme (Gibberella fujikuroi) mating population A predominates and that a potential exists for production of fumonisins in Mexican maize.     

Survival strategies of Leishmania donovani in mammalian host macrophages

Microbes have evolved a variety of strategies to survive inside their host cells. Some have the molecular machinery to survive in the hostile environment of phagolysosomes; others escape the phagosome to the more cozy environment of the cell cytoplasm; others inhibit the phagosome fusion with hydrolase-enriched endocytic organelles. This is the case for the promastigote form of the protozoan parasite Leishmania donovani which resides in a phagosome displaying poor fusogenic properties towards endosomes and lysosomes. Recent results indicate that the lipophosphoglycan (LPG), the major cell surface molecule of Leishmania, is involved in the inhibition of phagosome maturation. Further studies in our laboratories are addressing the molecular mechanisms of action of LPG to modulate phagosome fusion properties and its effect on the biogenesis of phagolysosomes.     

Slow twin conception at first birth and subsequent maternal twin proneness in a natural fertility population

To study whether apparently more fecund women having delivered twins at first birth have traits of higher twin-proneness, we performed a retrospective cohort study on population-based historical vital records of the 17-18th century French Canadian immigrants and their descendants under natural fertility conditions. Among 24896 mothers who had at least one child, 248 had twin maternities at their first birth (twinning rate = 1.0%). Among 21508 mothers with a valid marriage-first birth interval, twinning rate was 0.97% among prompt conceptions (7.0-11.0 months), with a particularly high rate at the interval of 7.0-8.0 months (2.2%). Marriages in August-October resulted in a higher twinning rate particularly for the slow conceptions than those in the other seasons. Promptly-conceived mothers of twins at the first delivery may seem to have higher fecundity, but subsequent births from these mothers (n = 88) show a lower twinning rate (1.7%) particularly at younger maternal age than from the other mothers who had slowly conceived twins at their first birth (n = 112). The latter show a 4.5% twinning rate as a whole among their second or later births. So-called twin-proneness of a mother, whether genetic or acquired, was not connected to higher conception rate of twin's mothers immediately after marriage. Reduced fecundity, which may have been imposed by some environmental factors, could raise the chance of twinning.     

Person memory and causal attributions.

Three experiments with 273 college students were conducted to reconcile the apparent contradiction between the well-established finding that initial impressions are resistant to incongruent (ICG) information and the finding that information ICG with an impression is particularly likely to be recalled. Using a procedure similar to that of R. Hastie and P. A. Kumar (1979), a situational or dispositional attribution was provided for a target item, which was either congruent (CG) or ICG with an initial impression. The ICG item was more likely than the CG item to be recalled only when attributed to dispositional causes (Exp I). The congruence of the target had greater impact on impressions when attributed to dispositional causes, particularly when Ss were given little other information about the target (Exps I and II). Exp III revealed that Ss preferred situational attributions for ICG items and dispositional attributions for CG. The authors conclude that Hastie and Kumar's findings may be limited to conditions in which situational attributions for TCG information are not provided. Possible mediators of the effects of causal attributions on recall, and the relation between recall and impressions are discussed. (29 ref) (PsycINFO Database Record (c) 2010 APA, all rights reserved)     

Drift correction in a multichannel integrated optical young interferometer

We demonstrate that in a sensor based on a multichannel Young interferometer, the phase information obtained for different pairs of channels can be used to correct the long-term instability (drift) due to temperature differences between measuring and reference channels, the drift in the alignment of the setup, etc. Experiments show that the nature of a major part of the drift is such that the drift present in one of the channels can be determined by interpolation of the drift measured in the two adjacent channels. It is shown that a drift reduction of 10 times can be achieved as compared with the situation in which no correction is applied. We anticipate that these findings will permit the exploitation of the extreme sensitivity of interference-based sensors to a much greater extent.     

Asymptotic Bias and Variance of Conventional Bispectrum Estimates for 2-D Signals

In this paper, we derive the asymptotic bias and variance of conventional bispectrum estimates of 2-D signals. Two methods have been selected for the estimation: the first one – the indirect method – is the Fourier Transform of the weighted third order moment, while the second one – the direct method – is the expectation of the Fourier component product. Most of the developments are known for 1-D signals and the first contribution of this paper is the rigorous extension of the results to 2-D signals. The calculation of the bias of the direct method is a totally original contribution. Nevertheless, we did all calculations (bias and variance) for both method in order to be able to compare the results. The second contribution of this paper consists of the comparison of the theoretical bispectrum estimate bias and variance with the measured bias and variance for two 2-D signals. The first studied signal is the output of a non-minimal phase linear system driven by a non-symmetric noise. The second signal is the output of a non-linear system with Gaussian input data. In order to assess the results, we performed the comparison for both methods with different sets of parameters. We show that the maximum bias coefficient is the one of the 1-D case multiplied by the dimensionality of the signal for both methods. We also show that the estimate variance coefficient is the 1-D case coefficient with a power equal to the signal dimensionality.Received October 21, 2002; Revised December 2003; Accepted March 25, 2004; First Online Version published in December 2004