Overview of ship-design expert systems

Expert systems constitute a branch of artificial intelligence, and their unique characteristics enable computer systems to perform at the level of a human expert by the use of algorithms that can capture domain-specific knowledge. Through an extensive survey of research about ship-design expert systems, we conclude that although development and implementation of expert systems for ship design offer substantial barriers, the shipbuilding industry needs them nonetheless. We examine the major reasons that use of expert systems in this industry has lagged behind. These include the problems of integration with existing computer-aided design systems, problems of knowledge representation and sizable development costs. We discuss in detail some key factors that can lead to the solution of these problems.     

The effects of pressure on the isothermal fluid behavior of bituminous coals

An investigation into the effects of pressure (helium gas) on the isothermal fluid behavior includes: (1) the effect of pressure on the rate of melting and coking as evidenced by the rate constants k(melt) and k(coke); (2) the effect of pressure on the energies of activation of melting and coking; (3) the effects of pressure on the characteristic times; (4) the effects of pressure on the maximum isothermal fluidity. Results from the effects of pressure on k(melt) revealed that it was generally the high total sulfur, low nitrogen, low reactives/mineral matter ratio, medium rank coals which show the greatest increase in k(melt), whereas the highest rank coals show the least decrease in k(coke). The energies of activation of melting and coking were not significantly affected by pressure. The investigation also reveals increases or decreases in the respective times of softening, maximum fluidity, resolidification and total time of fluid behavior under isothermal pressurized conditions. There appears the possibility that these shifts may be rank dependent. Additionally, the lower rank coals show the largest relative increase in their fluidities when subjected to pressure. Empirical relationships were derived in order to quantitatively predict the maximum isothermal fluidity for most (fluid) coals at a given pressure.     

Failure criteria of flip chip joints during accelerated testing

The criteria used to determine electrical failure was explored during accelerated testing of underfilled flip chip joints as a function of both different thermal cycling conditions and different sampling methods. The criteria was based on resistance measurements of daisy-chained solder joints monitored in situ and by endpointing. The sensitivity of the resistance criteria was found to depend strongly on test conditions and often could not be categorized into simple pass/fail groupings. Also, extremely small resistance changes were measured for joints with through-cracks generated by fatigue. Experimental error associated with fixing the cycles to failure was minimized by monitoring the absolute changes in resistance as a function of cycling time while simultaneously measuring the temperature dependence of resistance as the joints degrade. Failure times derived from interval part monitoring closely approximated in situ monitoring, but the resistance measurements for mild cycling conditions required a high degree of accuracy. Finally, a tunneling model is proposed to explain the resistance behavior of cracked joints.     

Psychology and the threat of nuclear war.

Discusses what is known about the effect of nuclear war on survivors' behavior, the effect of the threat of nuclear war, reducing the threat of nuclear war, and psychology's role in reducing the threat of nuclear war. It is concluded that although psychology has a certain level of understanding of the causes and consequences of nuclear war, its ability to provide counsel is limited. (55 ref) (PsycINFO Database Record (c) 2010 APA, all rights reserved)     

Effect of humidity and temperature on the adhesive strength of pressure sensitive adhesives

This paper reports the effect of humidity and temperature on the adhesive strength of a pressure sensitive adhesive (Flexbond 150) used to bond Mylar films. It has been found that, ill general, the adhesive strength decreases significantly with an increase in temperature. The effect of humidity on the bonding strength, however, was found to be process dependent. The sample preparation conditions, e.g., press weight for the bonding and the press time, are important in determining the humidity effect. The water sorption isotherm A 24°C for the adhesive was also determined. The amount of water sorbed by the adhesive at 95 percent relative pressure was found to be less than one weight percent.     

Use of radial forces for fault detection in tapping

A model-based method for fault detection in tapping based on torque and radial forces is proposed. The method allows the identification of faults typical of a tapping operation including axial misalignment, tap runout, tooth breakage both singly and together. The validation experiments have been run on aluminum 356 workpieces for different combinations of process faults. Results have shown that the model predictions are in good agreement with the experimental radial force and torque signals under various fault conditions.     

国际咨询工程师联合会(FIDIC)2005年年会中国·北京2005年9月4日--8日欢迎辞

世界工程咨询业的精英们将齐聚中国北京,参加国际咨询工程师联合会(FIDIC)2005年年会、成员协会代表大会和中国商机展示、推介、洽谈会.     

Effect of process distillation on mutagenicity and cell-transformation activity of solvent-refined,coal-derived liquids

Blended SRC-II process streams, representing a full boiling range distillate material, were fractionally distilled into non-overlapping 50 °F cuts with boiling points between 300 and 850 °F. Another set of 18 distillate cuts were obtained with boiling points ranging between 138 and 1055 °F. Distillate cuts were assayed for mutagenic activity using the histidine reversion assay with Salmonella typhimurium strains TA98, TA100, TA1535 and TA1537, as well as for mammalian-cell transformation activity in the Syrian hamster embryo test, and DNA damage in the prophage induction assay. Samples were also separated into chemical class fractions by alumina column chromatography and analysed by high resolution gas chromatography so that the chemical composition of the cuts could be related to their relative activity in the different assays. In the mammalian cell transformation and microbial mutagenicity assays, significant activity was found almost exclusively in distillate cuts with components boiling > 700 °F, with the highest activity in the transformation assay observed for cuts > 800 °F. All of the distillate cuts showed increased levels of DNA damage as expressed by lambda prophage induction in Escherichia coli 8177. However, the greatest activity was associated with distillate cuts with boiling points in the 800 °F + range. Chemical analysis of the 50 °F distillate cuts showed a variety of polycyclic aromatic hydrocarbons (PAH) and amino-PAH compounds to be present in the distillate cuts boiling > 700 °F and essentially absent from cuts boiling < 700 °F. The sample set of non-overlapping (50 °F) cuts were reblended according to the proportions of each cut found in the original blend material. These reblended composites were then assayed to compare their activity with that predicted from the activities of the component distillate cuts. The reblending experiments indicated the microbial mutagenicity response was essentially additive. Mammalian cell transformation activities were non-additive, indicating a compositional effect on the expression of transforming agents in the complex mixture.     

Coal liquefaction using a hydrogenated creosote oil solvent: H-atom transfer from hydrogen donor components in the solvent

The presence of hydroaromatic, hydrogen donor components in a coal-derived solvent is one of the more important factors in the successful operation of a non-catalytic coal liquefaction process. Various hydrogen donor species present in a hydrogenated creosote oil have been identified. Their rate of disappearance under conditions that are consistent with a short residence time coal liquefaction process has been used to rank the reactivities of the various hydrogen donors. 1,2,3,10b-Tetrahydrofluoranthene was found to be an exceptional donor while 4,5-dihydropyrene, the hexahydropyrenes and 9,10-dihydrophenanthrene were found to be quite active. Sym.-octahydrophenanthrene and 2a,3,4,5-tetrahydroacenaphthene exhibited moderate activity. Tetralin and the four methyltetralin isomers were found to be unreactive under the coal liquefaction conditions employed.