Examination of the Response of Regularly Packed Specimens of Spherical Particles Using Physical Tests and Discrete Element Simulations

Significant insight into the response of granular materials can be gained by coupling accurately controlled physical tests with complementary discrete element simulations. This paper discusses a series of triaxial and plane strain laboratory compression tests on steel spheres with face-centered-cubic and rhombic packings, as well as discrete element simulations of these tests. The tests were performed on specimens of uniform-sized steel balls and on specimens of steel balls with specified distributions of ball diameters. The packing configurations are ideal and differ considerably from real sand specimens, however, studies of such idealized granular materials can yield considerable insight into the response of granular materials and the capability of discrete element simulations to capture the response. The differences in response for the two packing configurations considered illustrate the importance of fabric. The numerical simulations captured the observed laboratory response well if the particle configurations, particle sizes, and boundary conditions were accurately represented. However, the postpeak response is more difficult to capture, and it is shown to be sensitive to the coefficient of friction assumed along the specimen boundaries. The simulations of the tests on the nonuniform-sized specimens demonstrated a clear correlation between strength and coordination number.     

Application potential of coarse-grained diamond grinding wheels for precision grinding of optical materials

Fine-grained resin bonded diamond tools are often used for ultra-precision machining of brittle materials to achieve optical surfaces. A well-known drawback is the high tool wear. Therefore, grinding processes need to be developed exhibiting less wear and higher profitability. Consequently, the presented work focuses on conditioning a mono-layered, coarse-grained diamond grinding wheel with a spherical profile and an average grain size of 301 µm by combining a thermo-chemical and a mechanical-abrasive dressing technique. This processing leads to a run-out error of the grinding wheel in a low-micrometer range. Additionally, the thermo-chemical dressing leads to flattened grains, which supports the generation of hydrostatic pressure in the cutting zone and enables ductile-mode grinding of hard and brittle materials. After dressing, the application characteristics of coarse-grained diamond grinding wheels were examined by grinding optical glasses, fused silica and glass–ceramics in two different kinematics, plunge-cut surface grinding and cross grinding. For plunge-cut surface grinding, a critical depth of cut and surface roughness were determined and for cross-grinding experiments the subsurface damage was analyzed additionally. Finally, the identified parameters for ductile-machining with coarse-grained diamond grinding wheels were used for grinding a surface of 2000 mm² in glass–ceramics.     

Low-power W-band CPWG InAs/AlSb HEMT low-noise amplifier

We present the development of a low-power W-band low-noise amplifier (LNA) designed in a 200-nm InAs/AlSb high electron mobility transistor (HEMT) technology fabricated on a 50-/spl mu/m GaAs substrate. A single-stage coplanar waveguide with ground (CPWG) LNA is described. The LNA exhibits a noise figure of 2.5 dB and an associated gain of 5.6 dB at 90 GHz while consuming 2.0 mW of total dc power. This is, to the best of our knowledge, the lowest reported noise figure for an InAs/AlSb HEMT LNA at 90 GHz. Biased for maximum gain, the single-stage amplifier presents 6.7-dB gain and an output 1-dB gain compression point (P1dB) of -6.7dBm at 90 GHz. The amplifier provides broad-band gain, greater than 5dB over the entire W-band.     

Adenovirus-mediated gene transfer is augmented in basilar and carotid arteries of heritable hyperlipidemic rabbits

OBJECTIVE: Regional presynaptic dopaminergic function and its regulation by dopamine agonists in different stages of PD can be measured by L-[11C]dopa and PET. In the current investigation, we studied the effects of therapeutic apomorphine on L-[11C]dopa uptake in patients with early and advanced PD. BACKGROUND: With disease progression and chronic dopamine agonist treatment, motor response complications supervene in a majority of PD patients. It is assumed that both presynaptic and postsynaptic changes in the dopaminergic system act to modify dopaminergic efficacy. METHODS: Patients with early and advanced stages of PD were included in the study. All patients were investigated twice with PET and L-[11C]dopa drug free and during a subsequent standardized therapeutic apomorphine infusion. RESULTS: Subregional analysis of the striatum showed differences in the effects of apomorphine infusion on the L-[11C]dopa influx rate in the two patient categories. In patients with early and uncomplicated PD, apomorphine infusion decreased the L-[11C]dopa influx rate. This decrease was most pronounced in the dorsal part of the putamen. In advanced PD patients, apomorphine did not affect the striatal L-[11C]dopa influx rate. CONCLUSIONS: We suggest that in mild and stable PD an upregulated presynaptic inhibitory feedback regulation, particularly in the dorsal putamen, acts to maintain congruity within the dopaminergic system in response to antiparkinsonian medication. However, this inhibitory feedback regulation is diminished with the progression of nigrostriatal degeneration and chronic dopamine agonist treatment.     

In vitro antitumor activity of the novel marine agent, ecteinascidin-743 (ET-743, NSC-648766) against human tumors explanted from patients

BACKGROUND: Ecteinascidin-743 (ET-743), a member of the ecteinascidin family selected for clinical development, is a tetrahydroisoquinolone alkaloid isolated from the marine ascidian, Ecteinascidia turbinata. This novel compound is a minor groove binding, guanine-specific alkylating agent which also interacts with the microtubule network and blocks cell cycle progression at late S/G2. MATERIALS AND METHODS: A soft agar cloning assay was used to determine the in vitro effects of ET-743 against primary human tumor specimens taken directly from patients. A total of 93 evaluable specimens were exposed to ET-743 for one-hour (n = 25) and/or 14-day continuous exposure (n = 92) at concentrations ranging from 0.1 nM to 1 microM. In vitro responses were defined as an inhibition > or = 50% of human tumor colony forming units at a given concentration. RESULTS: One-hour exposure to ET-743 at concentrations of 0.1 nM, 1 nM, 10 nM, 100 nM and 1 microM induced in vitro responses in 0% (0/17), 6% (1/17), 16% (4/25), 13% (1/8), and 25% (2/8) of specimens, respectively. Continuous exposure to ET-743 at concentrations of 0.1 nM, 1 nM, 10 nM, 100 nM and 1 microM, inhibited 0% (0/16), 13% (2/16), 49% (44/90), 62% (47/76), and 77% (58/75) of tumor specimens, respectively. Tumor-specific responses and concentration-dependent relationships were observed with a continuous exposure to ET-743. At 100 nM, the compound inhibited 79% (11/14) breast, 69% (9/13) non-small-cell lung, 58% (7/12) ovary, and 88% (7/8) melanoma specimens. At 1 microM, ET-743 inhibited 100% (14/14) breast specimens, 85% (11/13) non-small-cell lung, 67% (8/12) ovary and 86% (6/7) melanoma specimens. Activity of ET-743 at and above 10 nM was also observed against sarcoma and kidney tumors. At 10 nM concentration and continuous exposure ET-743 demonstrated incomplete cross-resistance with paclitaxel, alkylating agents, doxorubicin and cisplatin. CONCLUSIONS: Our data from the cloning assay indicate that the duration of exposure to ET-743 is an important factor in human tumors. Therefore, long-term exposure to ET-743 may be preferred in future clinical trials. The activity of ET-743 in breast, non-small-cell lung, and ovarian cancers as well as in melanoma may deserve further clinical evaluations. The potential of ET-743 in sarcoma and renal tumors might also be considered. In addition, our data indicate that a plasma concentration of 100 nM of ET-743 must be considered as a target during the clinical development of the compound; also the concept of continuous/protracted exposure in clinical trials with ET-743 has to be taken into account.     

In vivo radiofrequency thermal balloon angioplasty of porcine coronary arteries: histologic effects and safety

The purpose of this study was to assess the safety and histologic effects of radiofrequency thermal balloon angioplasty in the coronary vasculature of normal pigs. Radiofrequency thermal balloon angioplasty was performed in 30 coronary arteries of 16 nonatherosclerotic pigs. Heated inflations were performed at either 50 degrees, 60 degrees, or 70 degrees C for 30 or 60 seconds, and were compared with five nonheated inflations in five additional arteries. All balloon inflations were performed at 2 atm pressure with a balloon/vessel diameter ratio of 1.2 to 1. Heart rate, arterial pressure, and left ventricular pressure were monitored continuously for each animal. A 12-lead ECG, coronary angiography, and two-dimensional transthoracic echocardiography were performed before and 1 hour after each balloon inflation. Each animal was subsequently put to death for postmortem cardiac examination. Heated inflations were well tolerated in 28 of the 30 arteries without significant adverse effects. During one inflation, ventricular fibrillation occurred because of prolonged ischemia from an occlusive guiding catheter. In another artery, a heated inflation resulted in a dissection with a transient decrease in distal coronary flow. Histologic examination revealed a significant increase in wall thinning and elastic fiber straightening with heating at 70 degrees C for both 30 and 60 seconds, and a significant increase in intracoronary thrombus with heating at 70 degrees C for 60 seconds. Depth of periarterial myocardial heat necrosis paralleled the increase in temperature, with an average depth of 166 microns at 50 degrees C, 312 microns at 60 degrees C, and 1031 microns at 70 degrees C. In vivo, radiofrequency coronary angioplasty can be performed relatively safely without significant electrical, hemodynamic, or ischemic changes beyond those seen with conventional nonthermal angioplasty. The extent of heat-induced vessel wall thinning, elastic tissue straightening, intracoronary thrombus formation, and periarterial myocardial necrosis are all related to balloon temperature or duration of heating.     

Stearic acid oxidation in the Alaskan red-backed vole: effects of cold and norepinephrine

Amphibian populations appear to be declining around the world. Although there is no single cause, one factor may be pollution from heavy metals. As a result of mining in the Silver Valley of Idaho, heavy metals have been released into habitats containing many species of sensitive organisms, including spotted frogs (Rana luteiventris). While the gross extent of pollution has been well documented, the more subtle behavioral effects of heavy metals such as lead, zinc, and cadmium are less well studied. We tested the effects of heavy metals on the short-term survival (LC50) of spotted frog tadpoles. Compared to single metals, metals presented together were toxic at lower doses. We also raised the tadpoles in outdoor mini-ecosystems containing either a single heavy metal or soil from an EPA Superfund site in the Silver Valley known to be composed of numerous heavy metals. Exposure to Silver Valley soil resulted in delayed metamorphosis. We tested the ability of metal-exposed tadpoles to detect and respond to chemical cues emanating from predacious rainbow trout. We found that high levels of Silver Valley soil, medium levels of zinc, and medium and high levels of lead resulted in a decreased fright response. Low levels of cadmium, zinc, and lead did not cause a significant effect, but low levels of soil did result in a decreased fright response. Heavy metals may alter interactions between tadpoles and their predators.     

CREB activation mediates plasticity in cultured hippocampal neurons

Activation of cyclic AMP dependent kinase is believed to mediate slow onset, long-term potentiation (LTP) in central neurons. Cyclic-AMP activates a cascade of molecular events leading to phosphorylation of the nuclear cAMP responsive element binding protein (pCREB). Whereas a variety of stimuli lead to activation of CREB, the molecular processes downstream of CREB, which may be relevant to neuronal plasticity, are yet largely unknown. We have recently found that following exposure to estradiol, pCREB mediates the large increase in dendritic spine density in cultured rat hippocampal neurons. We now extend these observations to include other stimuli, such as bicuculline, that cause the formation of new dendritic spines. Such stimuli share with estradiol the same mechanism of action in that both require activity-dependent CREB phosphorylation. Our observations suggest that CREB phosphorylation is a necessary, but perhaps not sufficient, step in the process leading to the generation of new dendritic spines and perhaps to functional plasticity as well.     

Extracellular matrix survival signals transduced by focal adhesion kinase suppress p53-mediated apoptosis

In many malignant cells, both the anchorage requirement for survival and the function of the p53 tumor suppressor gene are subverted. These effects are consistent with the hypothesis that survival signals from extracellular matrix (ECM) suppress a p53-regulated cell death pathway. We report that survival signals from fibronectin are transduced by the focal adhesion kinase (FAK). If FAK or the correct ECM is absent, cells enter apoptosis through a p53-dependent pathway activated by protein kinase C lambda/iota and cytosolic phospholipase A2. This pathway is suppressible by dominant-negative p53 and Bcl2 but not CrmA. Upon inactivation of p53, cells survive even if they lack matrix signals or FAK. This is the first report that p53 monitors survival signals from ECM/FAK in anchorage- dependent cells.