Reversible Reaction with CO2 and Control of CO2 Absorption/Desorption Properties of Ba2(Fe1−xInx)2O5 Solid Solutions

Ba₂(Fe_1?xIn_x)₂O₅ was prepared by a solid‐state reaction under a N₂ flow. It was revealed that the solid solutions had a cubic perovskite structure with disordered oxygen vacancies at room temperature. Thermogravimetry and X‐ray diffraction measurements revealed that Ba₂(Fe_1?xIn_x)₂O₅ can reversibly react with CO_2. It was found that the equilibrium temperature of the reaction could be controlled by preparing solid solution.     

Calibration of multiple kinects with little overlap regions

When using multiple Kinects, there must be enough distances among neighboring Kinects to avoid spoiled range data caused by the interference of their infrared speckle patterns. In the arrangement, their overlapped regions are too small to apply existing calibration methods using correspondences between their observations straightforwardly. Therefore, we propose a method to calibrate Kinects without large overlapped regions. In our method, first, we add extra RGB cameras in an environment to compensate overlapped regions. Thanks to them, we can estimate their camera parameters by obtaining correspondences between color images. Next, for accurate calibration, which considers range data as well as color images of Kinects, we optimize the estimated parameters by minimizing both the errors of correspondences between color images and those of range data of planar regions, which exist in a general environment such as walls and floors. Although our method consists of conventional techniques, its combination is optimized to achieve the calibration. © 2015 Institute of Electrical Engineers of Japan. Published by John Wiley & Sons, Inc.     

Determination of residual avoparcin in chicken muscle by HPLC with ultraviolet and amperometric detection

An analytical method was developed for determination of residual avoparcin in chicken muscle by measuring alpha- and beta-avoparcin, major components of the pharmaceutical preparation avoparcin, using HPLC with UV and amperometric detectors. The analytical HPLC was run on a Cosmosil 5C18-AR column (4.6 mm x 25 cm) with a gradient formed from A: 2.5% acetic acid, 0.01 mol/L sodium heptane sulfonic acid-acetonitrile (88.5:11.5) (pH 4.0) and B: 2.5% acetic acid-acetonitrile (10:90), using UV and amperometric detection (AMD) with glassy-carbon electrode (+900 mV). Avoparcin was extracted from chicken muscle by homogenization with methanol-0.2 mol/L sulfuric acid (6:4) followed by centrifugation after pH adjustment to 4 with 1 mol/L sodium hydroxide. The supernatant was evaporated to dryness, and the residue was dissolved in water. The aqueous layer was adjusted to pH 4 by adding 1 mol/L sodium hydroxide. Then it was purified on a Sep-Pak tC18 plus ENV cartridge. The cartridge was washed with water, and retained substances were eluted with 50% methanol. The eluate was evaporated to dryness under reduced pressure. The residue was dissolved in water and determined by HPLC. Recoveries of avoparcin spiked in chicken muscle were 73.1-88.1% at levels of 2-10 micrograms/g. The detection limits were 0.5 microgram/g (UV) and 0.2 microgram/g (AMD).     

A method to modify coordinates of detectors in positron emission tomography systems

A new method to modify coordinates of detectors in any positron emission tomography (PET) system using a radioactive point source is developed. This method is based on selecting a centered detector in each detector block of PET and measuring coincidence counts between the two centered detectors in opposite detector blocks to find the coordinates of their LOR (Line of Response). Due to slight misalignment of detector positions, measured LORs may not intersect at a single point. Based on the proposed method, the coordinates of detectors can be measured with very high accuracy and the coordinate of the center of the gantry (which is normally the same as the center of field of view) can be defined correctly. The results of the application of our method to a small animal PET system (FinePET), which was recently developed at Tohoku University, Japan, are shown here. The method is expected to contribute to the design and development of PET systems which can realize a very high spatial resolution of less than 1 mm FWHM.     

Kinetics of CO2 reforming of methane by catalytically activated metallic foam absorber for solar receiver-reactors

Ni–Cr–Al metallic foam absorber with high porosity was catalytically activated using a Ru/γ-Al₂O₃ catalyst, and was subsequently tested with respect to CO₂ reforming of methane in a small-scale volumetric receiver-reactor by using a sun-simulator. A chemical storage efficiency of 37% was obtained for a mean light flux of 325 kW m⁻². Furthermore, the activity and the stability of the metallic foam absorber were compared with those of a SiC foam absorber activated with the same Ru/γ-Al₂O₃ catalyst for 50 h of light irradiation, and it was found that the metallic foam absorber has superior catalytic stability in comparison to the SiC form absorber. In addition, unlike ceramic foams such as SiC, metallic foams feature superior plasticity, which prevents the emergence of cracks caused by mechanical or thermal shock.     

Mass mating method in combination with G418- and aureobasidin A-resistance markers for efficient selection of hybrids from homothallic strains in Saccharomyces cerevisiae

We have developed a mass mating method using the spore suspensions of homothallic yeasts of Saccharomyces cerevisiae in combination with dominant selective drug resistance markers, Tn601(903) against geneticin and AUR1-C against aureobasidin A for the selection of the hybrids. To examine the effectiveness of these markers in the mass mating method, each marker was introduced into a homothallic wine yeast. Using a mixed culture of spore suspensions from the resultant transformants, many hybrids were screened by the drug resistance markers. This method is more practical than the spore-to-spore mating method because it does not require the use of a micromanipulator and many hybrids are obtained at one time. The resultant hybrids could be utilized for industrial brewing because plasmids, which are used to confer resistance markers, are easily eliminated from the hybrids by cultivation in a medium without drugs. We propose that the mass mating method using spore suspensions in combination with dominant selective geneticin- and aureobasidin A-resistance markers is useful for the selection of hybrids from industrial homothallic yeasts.     

An optoelectronic self-oscillatory circuit with an optical fiber delayed feedback and its injection locking technique

An optoelectronic self-oscillatory circuit with a constant time delay and its injection locking have been theoretically and experimentally described. The oscillation circuit incorporates a delayed feedback path by utilizing an optical fiber and is characterized by a differential-difference equation. The oscillation waveform and amplitude have been investigated by computing the equation. It is also shown that a stable frequency locking region exists and expands with an increase in the injection amplitude. By employing a carrier signal, two methods for optoelectronic oscillation, an AM and an FM type, are proposed and have been demonstrated to obtain more stable oscillation.     

Finite element incremental contact analysis with various frictional conditions

The use of contacting components such as gear teeth in mesh and shrink-fitted shafts is very common in engineering practice. This paper deals with the development of a theoretical method which gives a solution for non-linear contact problems with irreversibility resulting from stick-slip phenomenon. The method is based on the finite element method and load incremental theory. The geometrical and the statical boundary conditions on contact surfaces are treated as additional conditions being independent of stiffness equations. As a result, the algorithm of calculation is simplified and only a part of the simultaneous equations related to the contact surfaces is required to be solved instead of the overall stiffness equations at each step. Furthermore, the magnitude of load causing a change in a contact condition of one contact nodepair is taken as a load increment, in analogy with the incremental iterative procedure for elastic-plastic problems. Therefore, the method provides a general and efficient method for analysis and design of such problems. As illustrative examples, the stick-slip behaviour of turbo-alternator end-bells and other problems are discussed. The calculated results show a reasonable agreement with experimental data and other solutions.