Short-term frequency stability of clock generators for multigigahertz rapid-single-flux quantum digital circuits

Superconducting digital systems based on Josephson junctions have generally used a synchronous timing strategy. A master clock signal is used to delimit a data window during which the system changes state and data is transferred from one block to the next. The temporal stability of the clock signal has a profound effect on the performance of rapid single flux quantum (RSFQ) digital systems. In particular, short-term clock fluctuations, or clock jitter, can degrade system performance due to the hazard of timing constraint violations. The successful development of large-scale RSFQ digital systems will require highly stable multigigahertz on-chip clock sources. To meet this need, methods for characterizing and measuring the short-term stability of such sources are required. We identify the relevant figure of merit to characterize and compare various clocks: the cycle-to-cycle standard deviation of the clock periods. We present experimental techniques for the measurement of this figure of merit and apply them to the measurement of jitter in a clock generator used often in RSFQ systems, the ring oscillator. High-frequency phase noise measurements found the jitter of a 9.6-GHz clock to be in the range from 0.6% to 0.36% of the clock period. The measured values of clock jitter fell within the 95% confidence interval of our stochastic circuit simulations. This was sufficient evidence to conclude that thermal noise from the resistors in the circuit may be the dominant source of jitter in the ring oscillator.     

A model material approach to the study of fracture process zone of quasi-brittle materials

A new approach to study the fracture of quasi-brittle materials is introduced: the design and testing of model materials. By model material is understood a material with enlarged microstructure and which material parameters, such as stacking and mechanical properties of particles and cohesion force, can be fully controlled. In this paper a first example to the model materials approach is presented, consisting in 5 mm steel particles bonded in a precise stacking with an epoxy-based glue. It is shown how it is possible to correlate the different fracture mechanisms and ultimate peak load of the model material to the particle pair force and to the fracture process zone size. It is also seen how a quasi-brittle behaviour is produced in the presence of mechanisms that induced the crack to shift fracture planes, that is, in presence of energy dissipative mechanisms.     

FDTD simulation of 30 /spl mu/m diameter polymer micro-ring

Numerical results on polymer surrounded by an air micro-ring coupled to waveguides are presented. The FDTD method predicts a filter width of 1.4 nm and an extraction efficiency of almost 80% for a gap of 0.15 /spl mu/m.     

Examining pre-adoption interest in online innovations: an exploratory study of e-service personalization in the public sector

In order to better understand why public organizations develop interest in online innovations, this paper develops a revised model of technological innovation with an emphasis on socio-technical factors associated with electronic service delivery. This model focuses on three primary dimensions of online innovation: perceived need, technical capacity, and risk mitigation. It is hypothesized that these three dimensions will have the greatest influence on the development of pre-adoption interest in a new online innovation. This model is then used to examine a single online innovation, personalization of online government information and services. Data from a survey of local governments is used to test the theory. A regression model was estimated from the survey data. Results suggest that perceived need, financial costs, and the ability to mitigate the risks associated with privacy issues each influence the level of interest in personalized online services. The results suggest that public organizations must find reliable means of determining external demand for online innovations, as well as reducing the risks associated with each specific type of online innovation prior to adoption.     

Iterative method for the design of DFT filter Bank

Multirate adaptive filters have numerous advantages such as low computational load, fast convergence, and parallelism in the adaptation. Drawbacks when using multirate processing are mainly related to aliasing and reconstruction effects. These effects can be minimized by introducing appropriate problem formulation and employing sophisticated optimization techniques. In this paper, we propose a formulation for the design of a filter bank which controls the distortion level for each frequency component directly and minimizes the inband aliasing and the residual aliasing between different subbands. The advantage of this problem formulation is that the distortion level can be weighted for each frequency depending on the particular practical application. A new iterative algorithm is proposed to optimize simultaneously over both the analysis and the synthesis filter banks. This algorithm is shown to have a unique solution for each iteration. For a fixed distortion level, the proposed algorithm yields a significant reduction in both the inband aliasing and the residual aliasing levels compared to existing methods applied to the numerical examples.     

A push mechanism for GPRS supporting private IP addresses

The General Packet Radio Service (GPRS) provides a packet switched data service for mobile users. However, the existing GPRS specification does not provide the push mechanism and it is difficult to support GPRS services such as call termination (incoming call) for wireless voice over IP (VoIP). Based on the short message service, this paper proposes a push mechanism for GPRS supporting private IP addresses. Our approach does not need to modify the existing GPRS structure.     

1.6 Tbit/s (40/spl times/40 Gbit/s) DPSK transmission over 3/spl times/100 km of TeraLight fibre with direct detection

By transmitting 40 channels over 300 km of TeraLight fibre, it is shown that optical differential phase shift keying can be used in 100 GHz-spaced 40 Gbit/s systems, with direct detection and a simple receiving filter. Chromatic dispersion tolerance around 300 ps/nm is also measured, compared to 70 ps/nm for NRZ.     

Schubspannungsbomben in Faserverbunden

Shear Bombs in Fibre Composites Despite an optimum external shape non‐load adapted internal fibre orientation can lead to the formation of shear cracks where crossing tension‐compression principal stress trajectories create localized shear peaks. Trees are subject to those failure because they cannot re‐arrange their fibres after wood formation. Bones can adjust their micro‐structure to changing load conditions and in this way can better control shear failure. The engineer working with fibre composites should be alert to avoid fibre arrangements not following the force flow. Localized shear zones may also form near notches similar to normal notch stresses, however they are not always situated at the contour line of the notch.     

Programmable group-delay module using binary polarization switching

We demonstrate the first programmable group-delay module based on polarization switching. With a unique binary tuning mechanism, the device can generate any differential group delay value from -45 to +45 ps with a resolution of 1.40 ps, or any true-time-delay value from 0 to 45 ps with a resolution of 0.7 ps. The delay varying speeds for both applications are under 1 ms and can be as fast as 0.1 ms. We evaluate both the dynamic and static performances of the device while paying special attention to its dynamic figures of merit for polarization-mode dispersion emulation and compensation applications. Our experiment shows that the device exhibits a negligible transient-effect induced power penalty (<0.2 dB) in a 10-Gb/s nonreturn-to-zero system.