Self-nanoemulsifying drug delivery system of docosahexanoic acid: development,in vitro,in vivo characterization

Context: Docosahexanoic acid (DHA) is an essential omega-3 fatty acid for normal brain development and its use has increased considerably in recent years.

Objective: The aim of this study is to develop and evaluate self-nanoemulsifying drug delivery systems (SNEDDS) of DHA for improved palatability, dispersibility and bioavailability.

Methods: The SNEDDS were prepared and evaluated for miscibility, employing different combinations of olive oil and soyabean oil as oil phase, Span 80, Span 20, soya phosphatidylcholine, Labrafil M 1944 CS as surfactants while Tween 80, PEG 400, Cremophor RH40 and propylene glycol as cosurfactants. Thermodynamically stable SNEDDS were characterized for dispersibility, self-emulsification time, droplet size, zeta potential along with sensory analysis. The optimized formulation was subjected to ex vivo and in vivo evaluation such as intestinal permeability, memory performance test, brain concentration and histopathology studies.

Results: The optimized SNEDDS formulation showed emulsification time of 27?±?4.7?s with droplet size of 17.6?±?3.5?nm and zeta potential of??37.6?±?0.5?mV. Intestinal absorption study depicted 18.3%, 21.5%, 41.5%, 98.7% absorption of DHA with SNEDDS-based formulation in comparison to 8.2%, 15.1%, 28.8%, 46.1% absorption of DHA with oil-based marketed formulation after 0.5, 1, 2 and 4?h. DHA concentration in brain homogenate was found to be increased to 2.6-fold in comparison to DHA-marketed formulation. This could be ascribed to enhanced dispersibility and bioavailability of DHA from nanosized formulation.

Conclusion: The developed formulation led to enhanced dispersibility and bioavailability of DHA due to the formation of nanodroplets.     

An integrated source transcoding and congestion control paradigmfor video streaming in the Internet

In this work we present an end-to-end optimized video streaming system comprising of synergistic interaction between a source packetization strategy and an efficient and responsive, TCP-friendly congestion control protocol [Linear Increase Multiplicative Decrease with History (LIMD/H)]. The proposed source packetization scheme transforms a scalable/layered video bitstream so as to provide graceful resilience to network packet drops. The congestion control mechanism provides low variation in transmission rate in steady state and at the same time is reactive and provably TCP-friendly. While the two constituent algorithms identified above are novel in their own right, a key aspect of this work is the integration of these algorithms in a simple yet effective framework. This “application-transport” layer interaction approach is used to maximize the expected delivered video quality at the receiver. The integrated framework allows our system to gracefully tolerate and quickly react to sudden changes in the available connection capacity due to the onset of congestion, as verified in our simulations     

Lattice Boltzmann method simulation of electroosmotic stirring in a microscale cavity

The suitable surface modification of microfluidic channels can enable a neutral electrolyte solution to develop an electric double layer (EDL). The ions contained within the EDL can be moved by applying an external electric field, inducing electroosmotic flows (EOFs) that results in associated stirring. This provides a solution for the rapid mixing required for many microfluidic applications. We have investigated EOFs generated by applying a steady electric field across a square cavity that has homogenous electric potentials along its walls. The flowfield is simulated using the lattice Boltzmann method. The extent of mixing is characterized for different electrode configurations and electric field strengths. We find that rapid mixing can be achieved by using this simple configuration which increases with increasing electric field strength. The mixing time for water-soluble organic molecules can be decreased by four orders of magnitude by suitable choice of wall zeta potential and electric field. We dedicate this paper to the memory of our colleagues Professors Kevin Granata and Liviu Librescu who fell tragically on April 16, 2007 while answering their call to serve higher education. They continue to inspire us. AM gratefully acknowledges support from Jadavpur University under the World Bank funded Technical Education Quality Improvement Programme of the Government of India and the hospitality of the Virginia Tech ESM Department where he conducted a portion of this work.     

Distributed video coding in wireless sensor networks

This paper addresses the important aspect of compressing and transmitting video signals generated by wireless broadband networks while heeding the architectural demands imposed by these networks in terms of energy constraints as well as the channel uncertainty related to the wireless communication medium. Driven by the need to develop light, robust, energy-efficient, and low delay video delivery schemes, a distributed video coding based framework dubbed PRISM is introduced. PRISM addresses the wireless video sensor network requirements far more effectively than current state-of-the-art standards like MPEG. This paper focuses on the case of a single video camera and use it as a platform to describe the theoretical principles and practical aspects underlying distributed video coding.     

Comparison of mechanical properties of ground corn stover,switchgrass, and willow and their pellet qualities

Mechanical and physical properties of ground corn stover, switchgrass, and willow were measured and compared in addition to the quality of pellets. Biomass was size-reduced with two different screen sizes (3.175 and 6.35?mm) and conditioned to obtain samples at two different moisture contents (17.5 and 20% on wet basis). Ground switchgrass had the smallest and willow had the highest D₅₀ when size-reduced with the same screen size. Hydrostatic triaxial compression tests were performed using the cubical triaxial tester to determine the bulk modulus, compression index, and spring-back index at specific unloading pressures (20, 45, 70, and 95?kPa). The trends of pressure vs. volumetric strain and void ratio vs. natural log of pressure were similar for all three materials; however, the magnitudes were different. Willow, size-reduced with 3.175?mm screen size at 17.5% wet basis, had the highest bulk modulus among different conditions of all the three biomass. Pellet durability values for all the three materials were higher than 80%. Corn stover pellets formed with 3.175?mm screen size at 20% wet basis had the highest diametral tensile and axial compressive strengths among different conditions for all the three biomass, however the values were not significantly different (p?>?0.05).     

Measurement of Bulk Mechanical Properties and Modeling the Load-Response of Rootzone Sands. Part 1: Round and Angular Monosize and Binary Mixtures

The bulk mechanical properties of two different types of rootzone sands (round and angular) were measured using a cubical triaxial tester. Two monosize sands (d 50 = 0.375 mm and 0.675 mm) and their 50:50 binary mixtures (d 50 = 0.500 mm) were studied. The compression, shear, and failure responses of the above-mentioned six compositions were analyzed, compared, and modeled. Two elastic parameters (bulk and shear moduli) and two elastoplastic parameters (swelling and consolidation indices) of the six sand compositions were also calculated and compared. The angular sand was more compressible than round sand during isotropic compression. In addition, the angular sands tended to have lower initial bulk density and high porosity values. Among the three different size fractions, the 0.375 mm mixture was least compressible for both sand shapes. The failure strength and shear modulus of the angular sand were higher than the round sands. In addition, due to their simplicity, phenomenological models were developed to predict the compression and shear behavior of the sands. The prediction models were validated using subangular and subround sands. Average relative difference values were calculated to determine the effectiveness of the prediction models. The mean average relative difference values for compression profiles, i.e., volumetric stress vs. volumetric strain, were from 16 % to 39 %, except for the initial load-response portion (< 1 % volumetric strain). The predictive models were effective in reproducing the failure responses: at 17.2 kPa confining pressure, the mean of average relative difference was 23 %; at 34.5 kPa , the mean difference was 24 %.     

Controlling Plastic Flow across Grain Boundaries in a Continuum Model

A framework for modeling controlled plastic flow through grain boundaries using a continuum plasticity theory, phenomenological mesoscopic field dislocation mechanics (PMFDM), is presented in this article. The developed tool is used to analyze the effect of different classes of constraints to plastic flow through grain boundaries, as it relates to dislocation microstructure development and mechanical response of a bicrystal. It is found that in the case of low misorientation angle between adjacent grains, impenetrable grain boundaries cause significant work hardening as compared to penetrable grain boundaries due to the accumulation of excess dislocations along them. However, a penetrable grain boundary with a high misorientation angle effectively behaves as an impenetrable boundary, with respect to the stress-strain response.     

Peptide‐Based Fluorescent Probes for Deacetylase and Decrotonylase Activity: Toward a General Platform for Real‐Time Detection of Lysine Deacylation

Histone deacetylases regulate the acetylation levels of numerous proteins and play key roles in physiological processes and disease states. In addition to acetyl groups, deacetylases can remove other acyl modifications on lysines, the roles and regulation of which are far less understood. A peptide‐based fluorescent probe for single‐reagent, real‐time detection of deacetylase activity that can be readily adapted for probing broader lysine deacylation, including decrotonylation, is reported. Following cleavage of the lysine modification, the probe undergoes rapid intramolecular imine formation that results in marked optical changes, thus enabling convenient detection of deacylase activity with good statistical Z′ factors for both absorption and fluorescence modalities. The peptide‐based design offers broader isozyme scope than that of small‐molecule analogues, and is suitable for probing both metal‐ and nicotinamide adenine dinucleotide (NAD⁺)‐dependent deacetylases. With an effective sirtuin activity assay in hand, it is demonstrated that iron chelation by Sirtinol, a commonly employed sirtuin inhibitor, results in an enhancement in the inhibitory activity of the compound that may affect its performance in vivo.