A Review on Current Strategies for Extraction and Purification of Hyaluronic Acid

Since it is known that hyaluronic acid contributes to soft tissue growth, elasticity, and scar reduction, different strategies of producing HA have been explored in order to satisfy the current demand of HA in pharmaceutical products and formulations. The current interest deals with production via bacterial and yeast fermentation and extraction from animal sources; however, the main challenge is the right extraction technique and strategy since the original sources (e.g., fermentation broth) represent a complex system containing a number of components and solutes, which complicates the achievement of high extraction rates and purity. This review sheds light on the main pathways for the production of HA, advantages, and disadvantages, along with the current efforts in extracting and purifying this high-added-value molecule from different sources. Particular emphasis has been placed on specific case studies attempting production and successful recovery. For such works, full details are given together with their relevant outcomes.     

Molecular Effects of Chronic Exposure to Palmitate in Intestinal Organoids: A New Model to Study Obesity and Diabetes

Intestinal cell dysfunctions involved in obesity and associated diabetes could be correlated with impaired intestinal cell development. To date, the molecular mechanisms underlying these dysfunctions have been poorly investigated because of the lack of a good model for studying obesity. The main aim of this study was to investigate the effects of lipotoxicity on intestinal cell differentiation in small intestinal organoid platforms, which are used to analyze the regulation of cell differentiation. Mouse intestinal organoids were grown in the presence/absence of high palmitate concentrations (0.5 mM) for 48 h to simulate lipotoxicity. Palmitate treatment altered the expression of markers involved in the differentiation of enterocytes and goblet cells in the early (Hes1) and late (Muc2) phases of their development, respectively, and it modified enterocytes and goblet cell numbers. Furthermore, the expression of enteroendocrine cell progenitors (Ngn3) and I cells (CCK) markers was also impaired, as well as CCK-positive cell numbers and CCK secretion. Our data indicate, for the first time, that lipotoxicity simultaneously influences the differentiation of specific intestinal cell types in the gut: enterocytes, goblet cells and CCK cells. Through this study, we identified novel targets associated with molecular mechanisms affected by lipotoxicity that could be important for obesity and diabetes therapy.     

Fibrosis of Peritoneal Membrane as Target of New Therapies in Peritoneal Dialysis

Peritoneal dialysis (PD) is an efficient renal replacement therapy for patients with end-stage renal disease. Even if it ensures an outcome equivalent to hemodialysis and a better quality of life, in the long-term, PD is associated with the development of peritoneal fibrosis and the consequents patient morbidity and PD technique failure. This unfavorable effect is mostly due to the bio-incompatibility of PD solution (mainly based on high glucose concentration). In the present review, we described the mechanisms and the signaling pathway that governs peritoneal fibrosis, epithelial to mesenchymal transition of mesothelial cells, and angiogenesis. Lastly, we summarize the present and future strategies for developing more biocompatible PD solutions.     

Analysis of the gate current as a suitable indicator for FET degradation under nonlinear dynamic regime

Electron device degradation, although not directly accounted for, represents a key issue in microwave circuit design. This is especially true when the particular applications involved (e.g., satellite, military, consumer) do not allow or strongly discourage any kind of maintenance. As a matter of fact, in order to account for device degradation in circuit design, a suitable electron device model is needed which is able to predict the performance degradation as a function of the actual electrical regime involved in the device operation. Such a kind of model is not available in literature. In this paper, quantitative results are provided for device degradation indicators which correlate DC and RF stress experiments. These results can be considered an important step toward the definition of a nonlinear model accounting for device degradation.     

Three-dimensional effects induced by FRP-from-masonry delamination

In this study, delamination of a perfectly-adherent FRP reinforcement from a masonry pillar is investigated by means of a fully three-dimensional finite element model. It is shown that the width of the FRP reinforcement governs the propagation of damage through the brick bulk starting from the anchorage of the strip, and influences significantly the overall response in terms of peak strength, ductility and fracture energy. The resulting failure mechanisms are specified. A critical comparison with formulae provided by Italian design code is also provided, for which mechanically-based improvements are suggested, taking into account three-dimensional effects.     

Molds and Resists Studies for Nanoimprint Lithography of Electrodes in Low-Voltage Polymer Thin-Film Transistors

A low-cost patterning of electrodes was investigated looking forward to replacing conventional photolithography for the processing of low-operating voltage polymeric thin-film transistors. Hard silicon, etched by sulfur hexafluoride and oxygen gas mixture, and flexible polydimethylsiloxane imprinting molds were studied through atomic force microscopy (AFM) and field emission gun scanning electron microscopy. The higher the concentration of oxygen in reactive ion etching, the lower the etch rate, sidewall angle, and surface roughness. A concentration around 30 % at 100 mTorr, 65 W and 70 sccm was demonstrated as adequate for submicrometric channels, presenting a reduced etch rate of 176 nm/min. Imprinting with positive photoresist AZ1518 was compared to negative SU-8 2002 by optical microscopy and AFM. Conformal results were obtained only with the last resist by hot embossing at 120 °C and 1 kgf/cm² for 2 min, followed by a 10 min post-baking at 100 °C. The patterning procedure was applied to define gold source and drain electrodes on oxide-covered substrates to produce bottom-gate bottom-contact transistors. Poly(3-hexylthiophene) (P3HT) devices were processed on high-κ titanium oxynitride (TiO _x N _y ) deposited by radiofrequency magnetron sputtering over indium tin oxide-covered glass to achieve low-voltage operation. Hole mobility on micrometric imprinted channels may approach amorphous silicon (～0.01 cm²/V s) and, since these devices operated at less than 5 V, they are not only suitable for electronic applications but also as sensors in aqueous media.     

Artifact removal in magnetoencephalogram background activity with independent component analysis

The aim of this study was to assess whether independent component analysis (ICA) could be valuable to remove power line noise, cardiac, and ocular artifacts from magnetoencephalogram (MEG) background activity. The MEGs were recorded from 11 subjects with a 148-channel whole-head magnetometer. We used a statistical criterion to estimate the number of independent components. Then, a robust ICA algorithm decomposed the MEG epochs and several methods were applied to detect those artifacts. The whole process had been previously tested on synthetic data. We found that the line noise components could be easily detected by their frequency spectrum. In addition, the ocular artifacts could be identified by their frequency characteristics and scalp topography. Moreover, the cardiac artifact was better recognized by its skewness value than by its kurtosis one. Finally, the MEG signals were compared before and after artifact rejection to evaluate our method.     

Resolution-effective diameters for asymmetric-knife-edge pinhole collimators

The effects of penetration are included in the formulas for the prediction of the resolution of pinhole collimators through the use of effective diameters. Expressions of the resolution-effective diameter for pinholes with a double-knife-edge (DKE) profile are available in the literature. In this paper the expressions applicable to asymmetric-knife-edge (AKE) profiles, which include the important case of the single-knife-edge (SKE), are presented. Results indicate that the simplest methods that are still accurate in the calculation of DKE effective diameters do not produce in general formulas with similar accuracy for AKE profiles, due to increased susceptibility to penetration. Especially at high energy (365 keV), for the SKE case more advanced formulas are necessary and were, therefore, derived.     

Manganese oxide thin-films for current-signal sensing and thermal insulation

Manganese oxide thin-films for current-signal sensing and thermal insulation were synthesized by high-vacuum evaporation and thermal oxidation processes at low-temperature conditions. Structure-formation of the films with orthorhombic-partial structure of MnO₂/Mn₂O₃ was investigated by X-ray diffraction. Raman studies have demonstrated that thermal properties can be influenced by the symmetry of the Mn–O bonds and it associated with the dynamic Jahn–Teller distortion. Dynamic behavior of samples as a function of the frequency response to verify their performance as signal sensors was evaluated by resistive–inductive circuit (RL circuit). To demonstrate the thermal capability of samples from current–voltage (I–V) characteristics, a Schottky emission model was used.     

A fast and reliable technique for muscle activity detection from surface EMG signals

The estimation of on-off timing of human skeletal muscles during movement is an important issue in surface electromyography (EMG) signal processing with relevant clinical applications. In this paper, a novel approach to address this issue is proposed. The method is based on the identification of single motor unit action potentials from the surface EMG signal with the use of the continuous wavelet transform. A manifestation variable is computed as the maximum of the outputs of a bank of matched filters at different scales. A threshold is applied to the manifestation variable to detect EMG activity. A model, based on the physical structure of the muscle, is used to test the proposed technique on synthetic signals with known features. The resultant bias of the onset estimate is lower than 40 ms and the standard deviation lower than 30 ms in case of additive colored Gaussian noise with signal-to-noise ratio as low as 2 dB. Comparison with previously developed methods was performed, and representative applications to experimental signals are presented. The method is designed for a complete real-time implementation and, thus, may be applied in clinical routine activity.