Deuterated liquid scintillator (NE230) as a fast neutron detectorfor cold-fusion and other research

Deuterated scintillators (NE230) can provide, without time-of-flight, usable neutron energy spectra for neutrons E _n⩾1 MeV. The authors have assembled and calibrated several of these detectors and used them in experiments searching for d+d fusion-neutron emission (E_n, 2.5 MeV) in Pd+D ₂O electrolysis and Ti+D₂ adsorption at LN temperatures. The detectors yielded direct fusion-neutron spectra and set limits in the Pd+D and Ti+D experiments of <7×10^-24 fusion n/s/dd pair and <3×10^-24 fusion n/s/dd pair respectively. In addition, these detectors have been used for in-beam accelerator experiments requiring coincidence between fast neutrons and scattered ions     

Pressurized fluidized-bed hydro retort ing of raw and beneficiated Eastern oil shales

Bench-scale tests were conducted with raw and beneficiated shales in an advanced multi-purpose research reactor. Raw Alabama shale and raw and beneficiated Indiana shales were retorted at 515 °C using hydrogen pressures of 4 and 7 MPa. Shale feed rates were 15 to 34 kg h⁻¹. High oil yields and carbon conversions were achieved in all tests. Oil yield from Alabama shale hydroretorted at 7 MPa was 200% of Fischer assay. Raw and beneficiated Indiana shales hydroretorted at 7 MPa produced oil yields of 170 and 195% of Fischer assay respectively. Total carbon conversions were >70% for all tests conducted at 7 MPa.     

Jitter in ATM networks and its impact on peak rate enforcement

Cells arriving to an ATM network experience random delays due to queueing in upstream multiplexing stages, notably in customer premises. This is the phenomenon of jitter and the aim of the present paper is to study its influence on peak rate enforcement. We first introduce some general characterizations of jitter and then, describe two models of jittered flows based on simple queueing systems. We discuss the objectives of peak rate enforcement and study the impact of jitter on the dimensioning of jumping window and leaky bucket mechanisms. A useful synthetic characterization of jitter appears to be a remote quantile of the cell delay distribution expressed in units of the initial inter-cell interval.     

Using fractal structure to describe nickel crystal morphology

The morphology of nickel crystals can be quantified using measurements of fractal structure. In the study described in this article, fractal dimensions of cross sections of 16 nickel samples were determined, and the numerical analysis indicates that the more rugged surfaces are characterized by higher fractal dimensions although the relationship between morphology and fractal dimension is relatively weak. However, the data also show that fractal dimension is a better predictor of morphology than apparent density, which is the measurement currently used. The nickel samples were also subjected to an avalanching disc technique that has the potential to separate out the differences in flow in the different types of nickel powder. The differences in flow between powders were ascribed to the similar gross morphologies of the particles, and the presence of shattered individual particles in the mix. For more information, contact A.E. Lewis, University of Cape Town, Precipitation and Crystallisation Research Facility, Department of Chemical Engineering, Rondebosch, 7701, South Africa; +27-21-650-4091; fax +27-21-689-7479; e-mail alison@chemeng.uct.ac.za.     

An application of expert systems techniques to the on-line control and fault diagnosis of a mixing process

An application of expert hierarchical control is described in this paper. The control is implemented in a two-level configuration, where the lower layer performs direct regulation control and the upper layer performs supervisory functions. In the regulation layer, a rule-based controller performs the regulation task, where the controller is constructed upon causal relations between subsystems. The control action is inferred from the measurement of both controlled and noncontrolled variables. In the supervisory layer, the main function is a fault diagnosis system which diagnoses faults on-line. The diagnosis is based upon reasoning from the structure of the system and the functions of its components, and efficient diagnosis is achieved by dividing the system into several subsystems. The overall technique has been successfully implemented on a pilot scale mixing process under on-line computer control.     

A method to estimate the initial length of equine tendons

A procedure is described by which the length of a tendon at the onset of loading is determined objectively. The procedure includes the fitting of third-order polynomial functions on the load-elongation data. The onset of loading is detected by an increasing fit of the polynomial by selective data reduction of the initial part of the load-elongation curve. The procedure results in an objective and reproducible definition of the zero strain level of a tendon.     

Reliability evaluation and optimisation of imperfect inspections for a component with multi-defects

In this paper, a model is developed to evaluate the reliability and optimise the inspection schedule for a multi-defect component. The model uses a non-homogeneous Poisson process (NHPP) method in conjunction with a delay time approach. The inspections are designed to detect any defects in the component, however it can be imperfect. The defect is a definable state before a functional failure happens to the component. Occurrences of defects are assumed to follow an NHPP and a defect will be minimally repaired if it is identified during an inspection. It is shown that the failures occurring in an interval of inspection will also follow an NHPP. The situation of imperfect inspections and non-constant inspection intervals are considered. An algorithm is presented to optimise the intervals of inspections in order to maximise the reliability of the component, and the properties of the algorithm are shown. A numerical example with parametric study is given to show the performance of the model and the algorithm.