Low temperature swelling and densification properties of LWR fuels

Analysis of recent data reported in the literature on low temperature swelling and densification behavior of light water reactor (LWR) fuel suggests that, at low irradiation temperatures, the extent of irradiation induced densification shows a simple exponential dependence on burnup with a rate constant that is insensitive to temperature and flux level. These data are also consistent with the view that the total porosity controls the kinetics of irradiation-induced densification process. In the same temperature range the rate of swelling was found to be constant to a burnup near 50 GWD/MTU, with a value of approximately 1% per 10 GWD/MTU. The significance of these results is discussed in terms of current theories.     

Development and optimisation of a defined high cell density yeast medium

Saccharomyces cerevisiae cells grown in a small volume of chemically defined media neither reach the desired cell density nor grow at a fast enough rate to scale down the volume and increase the sample number of classical biochemical assays, as the detection limit of the readout often requires a high number of cells as an input. To ameliorate this problem, we developed and optimised a new high cell density (HCD) medium for S. cerevisiae. Starting from a widely used synthetic medium composition, we systematically varied the concentrations of all components without the addition of other compounds. We used response surface methodology to develop and optimise the five components of the medium: glucose, yeast nitrogen base, amino acids, monosodium glutamate, and inositol. We monitored growth, cell number, and cell size to ensure that the optimisation was towards a greater density of cells rather than just towards an increase in biomass (i.e., larger cells). Cells grown in the final medium, HCD, exhibit growth more similar to the complex medium yeast extract peptone dextrose (YPD) than to the synthetic defined (SD) medium. Whereas the final cell density of HCD prior to the diauxic shift is increased compared with YPD and SD about threefold and tenfold, respectively. We found normal cell-cycle behaviour throughout the growth phases by monitoring DNA content and protein expression using fluorescent reporters. We also ensured that HCD media could be used with a variety of strains and that they allow selection for all common yeast auxotrophic markers.     

Structural features of arabinoxylans from Sonalika variety of wheat: comparison between whole wheat flour and wheat bran

Arabinoxylans (AX) were extracted from Sonalika variety of wheat (whole wheat flour and wheat bran) with barium hydroxide and sodium hydroxide and purified by a combination of alcohol precipitation and glucoamylase digestion. Structural features of purified AX were elucidated by methylation analysis, ¹³C NMR, FT‐IR, periodate oxidation and optical rotation measurements. The AX showed a backbone of xylose residues with β(1–4) linkages and were branched mainly through O‐3 of xylose residues. Completely branched xylosyl residues were also present. Copyright © 2003 Society of Chemical Industry     

Determination of InP HEMT noise parameters and S-parameters to 60GHz

A millimeterwave experimental technique is described for directly determining the noise parameters and scattering parameters of V-band InP HEMT's. The parameters are suitable for the design of monolithic millimeterwave integrated circuits since they represent the InP HEMT as it would appear in the monolithic environment. The method relies on careful characterization of the measurement system and the InP HEMT packages or test fixtures. Results are provided for an InP HEMT with 1.37 dB minimum noise figure and a maximum stable gain of 12.74 dB at 57 GHz. In addition, it is shown that noise parameters measured between 2 GHz and 26 GHz can be extrapolated to 60 GHz, and that consistent S-parameters can be obtained for InP HEMT's in precision packages and test fixtures     

Antimicrobial susceptibilities of Porphyromonas gingivalis, Prevotella intermedia, and Prevotella nigrescens spp. isolated in Spain

The susceptibilities of 143 Porphyromonas gingivalis, Prevotella intermedia, and Prevotella nigrescens isolates to 18 antimicrobial agents were tested. All P. gingivalis isolates were susceptible. In contrast, some Prevotella spp. (17%) were resistant to beta-lactams, erythromycin, clindamycin, or tetracycline and carried resistance genes, ermF or tetQ, or beta-lactamases.     

Effects of high oxygen concentrations on microbial biosensor signals. Hyperoxygenation by means of perfluorodecalin

Amperometric biosensors register oxygen depletion in response to analyte catabolism, and thus are limited by the availability of dissolved oxygen. Microbial sensors containing immobilized cells of Gluconobacter oxydans were hyperoxygenated to 400% of control levels and the effects on sensor responses to glucose were determined. Oxygenated perfluorodecalin (a completely fluorinated organic substance) was as effective in hyperoxygenation as direct sparging with O2, increasing sensor base medium oxygen concentrations from 9.3 to 37 mg/l. Hyperoxygenation enhanced maximal biosensor response amplitudes, particularly at high cell loading densities. Maximal response rates were also improved, although less dramatically. Results suggest that hyperoxygenation may be a new general approach for modulating biosensor responses.     

Correlation of functional magnetic source imaging with intraoperative cortical stimulation in neurosurgical patients

This study compared noninvasive preoperative functional imaging by using magnetoencephalography (MEG) with intraoperative direct cortical stimulation in ten patients undergoing neurosurgery. The goal was to assess the accuracy and reliability of MEG-based functional imaging in these patients as a possible replacement or adjunct for direct cortical stimulation with electrocorticography. Objective comparison of intraoperative mapping with preoperative MEG procedures was achieved by intraoperative recording of mapped cortical locations for motor responses using an interactive image-guided surgical device, the ISG viewing wand, with which mapping points could be marked on a previously acquired (MRI) set. In all ten patients, at least one stimulation site elicited a response during both MEG and intraoperative mapping. The central sulcus ipsilateral to the lesion was only directly visible on high-resolution MRIs in 3/10 cases and equivocally in 2/10. Coregistered with MRI to form magnetic source images (MSIs), MEG predictions of the postcentral gyrus were possible in all 10 cases. In all 10 cases, these were in agreement with intraoperative estimation of the precentral gyrus. Functional mapping of somatosensory cortex was achieved noninvasively in surgical patients by using MSI. The accuracy, compared with cortical stimulation, was always sufficient to define motor and somatosensory strips.