New technological solutions to protect the lining of blast-furnace hearths

The use of schungite as a partial replacement for coke is practiced in Russia at a number of metallurgical plants, both in the production of foundry iron (its primary use) and in making conversion pig iron. The largest amount of coke is replaced when foundry iron is being made, the replacement coefficient in this case having a value within the range 0.8–1.3. Studies that included continuous monitoring of the temperature of the carbon blocks in blast furnaces with volumes of 1719, 3200, and 5580 m³ unambiguously demonstrate that the thickness of the slag crust in blast furnaces increases with the use of schungite. Protecting the lining of the hearth through the use of schungite is also accompanied by a decrease in coke consumption. __________ Translated from Metallurg, No. 8, pp. 53–57, August, 2007.     

Organ distribution of bovine serum albumin administered intragastrically in the rat

Radioimmunoassay was employed to examine distribution of antigenic structures of bovine serum albumin (BSA), absorbed by the gastrointestinal tract, in the blood serum and organs of intact rats. It was shown that 3 h after administering 3H-BSA an appreciable amount of its antigenic structures could be identified in the blood serum, liver, spleen, and carcass of the animals. The total amount of antigenic determinants of BSA which got into the internal environment of the body from the intestine amounted to about 0.2% of the dose administered. The highest specific content of antigenic structures of BSA supplied via the intestinal barrier was detected in the spleen.     

Comparative studies on Ar and He closed-cycle MHD power plants combined with fossil fuel

Comparative studies on Ar and He closed-cycle MHD power plants combined with fossil fuel are performed. The sizes of a regenerative heat exchanger and a boiler are expected to be smaller for He than for Ar. The pressure loss of a working gas in a regenerative heat exchanger is reduced for He. The purification subsystem for He is expected to be more compact and economical than that for Ar; but a larger compressor is required for He than for Ar.     

Surface tension isotherms of a free surface and grain boundaries in the Cu-Sn system

Surface tension of pure copper and its alloys with Sn has been measured at 1000°C in a hydrogen atmosphere. Surface tension of a free surface equaled 1.81 N/m for pure copper, and 1.55, 1.38, and 1.28 N/m for the alloys with 0.05, 0.22, and 0.33 at % Sn, respectively; surface tension at grain boundaries equaled 0.5 N/m for pure copper, and 0.36, 0.3, and 0.23 N/m for the alloys, respectively. Based on these data, the concentration dependence of tin absorption at a free surface and grain boundaries has been calculated. Parameters of Sn absorption at grain boundaries and a free surface of copper have been compared with those of Sb and Bi.     

PIII treatment of Ti alloys and NiTi for medical applications

PIII is a powerful method to obtain hard and wear resistant surface on Ti alloys and NiTi by oxygen or nitrogen implantation. By adjusting the temperature, treatment time and heating regime, different phase compositions and layer thickness can be obtained. Depending on the specific system, a strong influence of the resulting microstructure on the wear and fatigue properties was observed. By considering these restrictions, successful animal tests can be designed and executed, as shown in this review article.