Chitosan-based fiber-sponge materials as a promising tool for microalgae harvesting from Lake Baikal

Mass eutrophication of microalgae and cyanobacteria is observed in Lake Baikal in the past decade. In this paper, the concept of replaceable adsorption filter material based on chitosan flocculant filler and chlorinated polyvinyl chloride polymer nonwoven material are proposed. Functional and mechanical properties and morphology of the material are investigated depending on a packing density and a degree of chitosan filling. The introduction of 45% chitosan increases the Young's modulus up to 10 times, and it makes the material more rigid in 2.8 times. The high efficiency of sorption and growth inhibition of cumulative biomass culture was shown. The biomass source is taken from the coast of Barguzinsky Bay of Lake Baikal. Dominant species is microalgae of Scenedesmus genus.     

Selective Binding of Cyclodextrins with Leflunomide and Its Pharmacologically Active Metabolite Teriflunomide

The selectivity of encapsulation of leflunomide and teriflunomide by native α-, β- and γ-cyclodextrins was investigated through ¹H NMR and molecular modeling. Thermodynamic analysis revealed the main driving forces involved in the binding. For α-cyclodextrin, the partial encapsulation was obtained while deep penetration was characterized for the other two cyclodextrins, where the remaining polar fragment of the molecule is located outside the macrocyclic cavity. The interactions via hydrogen bonding are responsible for high negative enthalpy and entropy changes accompanying the complexation of cyclodextrins with teriflunomide. These results were in agreement with the molecular modeling calculations, which provide a clearer picture of the involved interactions at the atomic level.     

Thioether Analogues of Disulfide‐Bridged Cyclic Peptides Targeting Death Receptor 5: Conformational Analysis,Dimerisation and Consequences for Receptor Activation

Cyclic peptides containing redox‐stable thioether bridges might provide a useful alternative to disulfide‐bridged bioactive peptides. We report the effect of replacing the disulfide bridge with a lanthionine linkage in a 16‐mer cyclic peptide that binds to death receptor 5 (DR5, TRAIL‐R2). Upon covalent oligomerisation, the disulfide‐bridged peptide has previously shown similar behaviour to that of TNF‐related apoptosis inducing ligand (TRAIL), by selectively triggering the DR5 cell death pathway. The structural and biological properties of the DR5‐binding peptide and its desulfurised analogue were compared. Surface plasmon resonance (SPR) data suggest that these peptides bind DR5 with comparable affinities. The same holds true for dimeric versions of these peptides: the thioether is able to induce DR5‐mediated apoptosis of BJAB lymphoma and tumorigenic BJELR cells, albeit to a slightly lower extent compared to its disulfide homologue. NMR analysis revealed subtle variation in the conformations of the two peptides and suggests that the thioether peptide is slightly less folded than its disulfide homologue. These observations could account for the different capability of the two dimers to cluster DR5 receptors on the cell surface and to trigger apoptosis. Nevertheless, our results suggest that the thioether peptide is a potential candidate for evaluation in animal models.     

Chemical hydrodynamics of a downward microbubble flow for intensification of gas‐fed bioreactors

Bioreactors are of interest for value‐upgrading of stranded or waste industrial gases. Reactor intensification requires development of low cost bioreactors with fast gas–liquid mass transfer rate. Here we assess published reactor technology in comparison with a novel downward bubble flow created by a micro‐jet array. Compared to known technology, the advanced design achieves higher volumetric gas transfer efficiency (k_La per power density) and can operate at higher k_La. We measure the effect of four reactor heights (height‐to‐diameter ratios of 12, 9, 6, and 3) on the gas transfer coefficient k_L, total interfacial area a, liquid residence time distribution, energy consumption, and turbulent hydrodynamics. Leading models for predicting k_L and a are appraised with experimental data. The results show k_L is governed by “entrance effects” due to Higbie penetration dominate at short distances below the micro‐jet array, while turbulence dominates at intermediate distances, and finally terminal rise velocity dominates at large distances. © 2017 American Institute of Chemical Engineers AIChE J, 64: 1399–1411, 2018     

Kinetic Study of Hydroperoxide Degradation in Edible Oils Using Electron Spin Resonance Spectroscopy

Lipid oxidation is a complex phenomenon involving free radicals which are highly reactive molecular species. The life-time of these radical species is extremely short and their detection is therefore difficult. Several electron spin resonance (ESR) spectroscopy methodologies make it possible to identify, quantify and measure the reactivity of radical species formed during oxidation–reduction reactions. In this study we took advantage of the specificity of ESR spectroscopy to detect radical compounds in order to determine the rate constants of hydroperoxide degradation, a key reaction involved in lipid oxidation. The interaction of 5-doxyl stearic acid and lipid-derived radicals was studied by following the intensity of ESR spectra. A kinetic model was developed to simulate data analysis obtained by ESR and values of rate constants for hydroperoxide degradation were determined at 100 and 110 °C. This quantitative approach of ESR spectroscopy has produced useful information about new rate estimates for hydroperoxide degradation in edible oils.     

Switchable Plasmonic Metasurface Utilizing the Electro-Optic Kerr Effect of a Blue Phase Liquid Crystal

A switchable metasurface composed of plasmonic split ring resonators and a polymer-stabilized liquid crystal blue phase is developed. Owing to field-induced birefringence (electro-optic Kerr effect), the state of polarization of the incident near infrared radiation changes, when a voltage is applied to the liquid crystal. Thus, different resonant modes of the split ring resonators can be addressed and the transmission spectrum changes accordingly. In comparison with other liquid crystal phases, blue phases have several advantages. For example, they are optically isotropic in the field-off state, so that no alignment layer is required. The results of the present study indicate that the advantages of these mesophases can be utilized for switchable metasurfaces.     

Virgin rapeseed oils obtained from different rape varieties by cold pressed method – their characteristics,properties, and differences

The aim of the present study was to compare different rape varieties. For this purpose oil from six different varieties of rapeseeds was cold pressed under laboratory conditions. In the obtained rapeseed oils the fatty acids composition and minor components, characteristic values (acid value; AV and TOTOX), oxidative stability (DSC test), and volatiles were determined and a sensory evaluation was carried out. The highest oxidative stability was found for oil from sample 5 (IP = 158 min), which also has the lowest amount of C18:3 (7.8%), chlorophylls (0.083 mg/kg), and metals (Cu²⁺ 0.02 mg/kg and Fe²⁺ 0.08 mg/kg). This oil has also the lowest AV (0.17 mg KOH/g), which may be related to the lowest moisture content of the seeds prior to extraction. It was characterized by the highest rapeseed flavor intensity. The lowest induction period was observed for samples 3 and 6 (100 min). Although sample 3 had the same low level of metals as sample 5 and the highest concentration of tocopherols (635 mg/kg), PUFA (33.9%), and AV (1.37 mg KOH/g) it also had the lowest intensity of rapeseed flavor among the analyzed oils. Sample 6, despite its low percentage of PUFA (24.7%), conjugated diens and triens, and the lowest content of total volatiles (0.4Vs), had the highest concentration of metals (Cu²⁺ 0.04 mg/kg and Fe²⁺ 0.34 mg/kg).     

Pulsatile Jet Cleaning of Filter Cloths Contaminated with Yeast Cells

The cleaning of filter cloths is necessary to avoid prolonged system downtime and strong fouling. Reliable cleaning concepts are central to the removal of residues from the complex surface of filter cloths. Particle residues, in particular, play a decisive role in the sufficiency of the cleaning performance. Consequently, enhanced particle‐removal cleaning concepts based on pulsatile jets for filter cloths have been developed. By varying the cleaning parameters, it has been demonstrated that increased pulse numbers and velocities improve the cleaning performance. Furthermore, this promising cleaning concept cleaned more effectively than conventional methods. The reduction in the amount of detergent needed is an ecological and economic advantage of pulsatile cleaning.     

Improvement of Aglycone π-Stacking Yields Nanomolar to Sub-nanomolar FimH Antagonists

Antimicrobial resistance has become a serious concern for the treatment of urinary tract infections. In this context, an anti-adhesive approach targeting FimH, a bacterial lectin enabling the attachment of E. coli to host cells, has attracted considerable interest. FimH can adopt a low/medium-affinity state in the absence and a high-affinity state in the presence of shear forces. Until recently, mostly the high-affinity state has been investigated, despite the fact that a therapeutic antagonist should bind predominantly to the low-affinity state. In this communication, we demonstrate that fluorination of biphenyl α-d -mannosides leads to compounds with perfect π–π stacking interactions with the tyrosine gate of FimH, yielding low nanomolar to sub-nanomolar K_D values for the low- and high-affinity states, respectively. The face-to-face alignment of the perfluorinated biphenyl group of FimH ligands and Tyr48 was confirmed by crystal structures as well as ¹H,¹⁵N-HSQC NMR analysis. Finally, fluorination improves pharmacokinetic parameters predictive for oral availability.