Survey and comparison of message authentication solutions on wireless sensor networks

Security is an important concern in any modern network. This also applies to Wireless Sensor Networks (WSNs), especially those used in applications that monitor sensitive information (e.g., health care applications). However, the highly constrained nature of sensors imposes a difficult challenge: their reduced availability of memory, processing power and energy hinders the deployment of many modern cryptographic algorithms considered secure. For this reason, the choice of the most memory-, processing- and energy-efficient security solutions is of vital importance in WSNs. To date, a number of extensive analyses comparing different encryption algorithms and key management schemes have been developed, while very little attention has been given to message authentication solutions. In this paper, aiming to close this gap, we identify cipher-based Message Authentication Codes (MACs) and Authenticated Encryption with Associated Data (AEAD) schemes suitable for WSNs and then evaluate their features and performance on a real platform (TelosB). As a result of this analysis, we identify the recommended choices depending on the characteristics of the target network and available hardware.     

Managing computer networks using peer-to-peer technologies

Peer-to-peer systems and network management are usually related to each other because the traffic loads of P2P systems have to be controlled to avoid regular network services becoming unavailable due to network congestion. In this context, from a network operation point of view, P2P systems often mean problems. In this article we take a different perspective and look at P2P technologies as an alternative to improve current network management solutions. We introduce an approach where P2P networks are used as flexible interdomain distributed management systems able to provide facilities often absent in traditional management systems. We present three examples of P2P-based network management: how managed network views can be shared in a P2P network, how P2P-based application layer routing can improve connectivity between management entities, and how groups of peers can be used to process management tasks in a balanced way. Our main goal is to show that P2P technologies are a feasible tool for network management, and thus motivate further investigations on the subject.     

Photonic Hydrogels from Chiral Nematic Mesoporous Chitosan Nanofibril Assemblies

Iridescence in animals and plants often arises from structural coloration, which involves hierarchical organization of minerals and biopolymers over length scales of the visible spectrum, leading to diffraction of light. In this work, discarded crustacean shells that are not known for their structural colors are used to produce photonic nanostructures of large, freestanding chiral nematic mesoporous chitosan membranes with tunable iridescent color. Bioinspired by colorful nanostructures in nature, photonic hydrogels with Bouligand‐type organization are fabricated from the twisted mesoporous membranes, where the chitosan nanofibrils are a novel precursor for surface acetylation and are also a biotemplate for polymerizing methyl methacrylate. The colors of the hydrogels can be tailored by swelling as they show large volume changes in response to changes in solvent environment.     

Mesoporous Silicon‐PLGA Composite Microspheres for the Double Controlled Release of Biomolecules for Orthopedic Tissue Engineering

In this study, poly(dl ‐lactide‐co‐glycolide)/porous silicon (PLGA/pSi) composite microspheres, synthesized by a solid‐in‐oil‐in‐water (S/O/W) emulsion method, are developed for the long‐term controlled delivery of biomolecules for orthopedic tissue engineering applications. Confocal and fluorescent microscopy, together with material analysis, show that each composite microsphere contained multiple pSi particles embedded within the PLGA matrix. The release profiles of fluorescein isothiocyanate (FITC)‐labeled bovine serum albumin (FITC‐BSA), loaded inside the pSi within the PLGA matrix, indicate that both PLGA and pSi contribute to the control of the release rate of the payload. Protein stability studies show that PLGA/pSi composite can protect BSA from degradation during the long term release. We find that during the degradation of the composite material, the presence of the pSi particles neutralizes the acidic pH due to the PLGA degradation by‐products, thus minimizing the risk of inducing inflammatory responses in the exposed cells while stimulating the mineralization in osteogenic growth media. Confocal studies show that the cellular uptake of the composite microspheres is avoided, while the fluorescent payload is detectable intracellularly after 7 days of co‐incubation. In conclusion, the PLGA/pSi composite microspheres offer an additional level of controlled release and could be ideal candidates as drug delivery vehicles for orthopedic tissue engineering applications.     

A Low-Power Wakeup Radio for Application in WSN-Based Indoor Location Systems

This paper presents a low-power wakeup radio (WUR) for application in indoor location systems. The presented radio has a better performance than the state-of-the-art radios, since it has low-power consumption, only 10 μW and it is perfectly integrated into a wireless sensor network based on ZigBee, which is used for location purposes. This performance was achieved due to an optimised radio frequency design of the WUR, which was embedded with a low-cost/low-power processor, and due to an enhanced control algorithm. Moreover, a software defined radio approach has been used to implement the WUR protocol. The WUR was designed and integrated in an existing WSN-based indoor location system which was originally based on a periodic sleep-wake up duty-cycled protocol. In the WUR protocol the location sensor is kept in deep sleep mode until it receives an external wake-up order. According to estimates, with this scheme, the battery lifetime can be increased from 200 days (using conventional duty-cycle protocol) up to almost 8000 days (sensor waken-up few times per day).     

The effect of cooking and processing on the glucosinolate content: Studies on four varieties of portuguese cabbage and hybrid white cabbage

The concentrations of individual and total glucosinolates were measured in four types of Portuguese cabbage and in one hybrid white cabbage before and after cooking. Typical Portuguese culinary procedures include boiling the cabbage for 10 min but for particular kale types the leaves are first shredded then boiled for 5 min (Caldo verde). Analysis of the fresh cabbage, cooked leaves and cooking water showed that the glucosinolate content of the cabbages is reduced by more than 50%. Almost all of this loss is accounted for as intact glucosinolates in the cooking water, normally used for soups in Portugal.     

Increasing channel capacity and range on urban optical analogAM-VSB CATV systems

It is often desirable to increase the capacity and the covered distance in lightwave TV systems. For doing so, the conventional CATV channel set-usually placed within the 50 to 550 MHz frequency range-may be up-shifted, by means of a subcarrier, to a low microwave frequency range, typically located at 2 GHz. Next, this shifted spectrum directly modulates a laser diode, in the analog AM mode. It is shown that this up-shift procedure may dislodge a number of nonlinear distortion components from the useful TV band. Consequently, the system effective optical modulation index may be increased, allowing for an expansion in the channel capacity or covered distance. This enlarged capacity or distance may compensate for the modest price increase concerning the up-shift equipment. All the performance evaluations presented here were carried out with a rigorous numerical model, and assuming the lightwave systems used the economical AM-VSB format     

Reliability of non-destructive test techniques in the inspection of pipelines used in the oil industry

The aim of this work is to evaluate the reliability of non-destructive test (NDT) techniques for the inspection of pipeline welds employed in the petroleum industry. Radiography, manual and automatic ultrasonic techniques using pulse-echo and time of flight diffraction (TOFD) were employed. Three classes of defects were analyzed: lack of penetration (LP), lack of fusion (LF) and undercut (UC). The tests were carried out on specimen made from pipelines containing defects, which had been artificially inserted on laying the weld bead. The results showed the superiority of the automatic ultrasonic tests for defect detection compared with the manual ultrasonic and radiographic tests. Additionally, artificial neural networks (ANN) were used in the detection and automatic classification of the defects.     

Long-term performance calculations based on steady-state efficiency test results: Analysis of optical effects affecting beam,diffuse and reflected radiation

There are a growing number of commercially available solar thermal collector types: flat plates, evacuated tubes with and without back reflectors and different tubular spacing or low concentration collectors, using different types of concentrating optics.These different concepts and designs all compete to be more efficient or simply cheaper, easier to operate, etc. at ever higher temperatures, and to extend the use of solar thermal energy in other applications beyond the most common water heating purposes.In view of the proper dimensioning of solar thermal systems and proper comparison of different collector technologies, for a given application, there is a growing need for existing and future simulation tools to be as accurate as possible in the treatment of these different collector types.Collector heat losses are usually considered to be well determined, under variable operating conditions, through the use of the heat loss coefficients provided by efficiency curve parameters. Yet, the traditional approach to the optical efficiency fails to describe accurately the optical effects affecting the amount of radiation which actually reaches the absorber.This paper develops a systematic approach to the proper handling of incident solar radiation, folding that with the information available from tests for determination of collector efficiency curve (steady-state) and the way the optics of different collector types uses incident solar radiation and transforms it into useful heat.     

Modeling and gradient pattern analysis of irregular SFM structures of porous silicon

Technological applications in opto-electronic devices have increased the interest in characterizing porous silicon structure patterns. Due to its physical properties, solutions from KPZ 2D are adopted to simulate the structure of porous material interface whose spatial characteristics are equivalent to those found in porous silicon samples. The analysis of the simulated and real Scanning Force Microscopy (SFM) surfaces was done using the Gradient Pattern Analysis (GPA). We found that the KPZ 2D model presented asymmetry levels compatible with the irregular surfaces observed by means of SFM images of π-Si.