CO<Subscript>2</Subscript> adsorption at high pressures in MCM-41 and derived alkali-containing samples: the role of the textural properties and chemical affinity

The adsorption properties of N₂ and CO₂ of MCM-41 and derived alkali-containing samples were analyzed over a wide range of pressures (up to ~4500 kPa) and temperatures (between 30 and 300 °C). The high-pressure and high-temperature experiments were carried out on pure MCM-41 and K- and Na-impregnated derived samples. It was analyzed the influence of pressure and temperature on the CO₂ capture capacity on pure and impregnated samples. The adsorption performance was correlated to the structure and textural properties of the materials using X-ray diffraction and N₂ adsorption–desorption measurements. The addition of an alkaline element changes the textural properties of the material increasing the pore size, which positively affected the CO₂ adsorption capacity of these materials at high pressure. In addition, the isosteric heats of adsorption gave information about the chemical affinity between the impregnated materials and CO₂. The CO₂ adsorption at ~ 4500 kPa for the samples with 5 wt% Na at 100 and 200 °C were 77.98 and 9.79 mmol g^?1, respectively, while the pure MCM-41 adsorbs only 8.92 mmol g^?1.     

Effect of Tempering on the Oxidation Behaviour of a Roll-Grade High-Speed Steel During Thermal Cycling

Oxidation of Metals - The oxidation characteristics of a roll-grade high-speed steel with different tempering heat treatments were studied under thermal cycling conditions at 650&nbsp;°C...     

Synthetic Activity of Recombinant Whole Cell Biocatalysts Containing 2-Deoxy-D-ribose-5-phosphate Aldolase from Pectobacterium atrosepticum

In nature 2-deoxy-D-ribose-5-phosphate aldolase (DERA) catalyses the reversible formation of 2-deoxyribose 5-phosphate from D-glyceraldehyde 3-phosphate and acetaldehyde. In addition, this enzyme can use acetaldehyde as the sole substrate, resulting in a tandem aldol reaction, yielding 2,4,6-trideoxy-D-erythro-hexapyranose, which spontaneously cyclizes. This reaction is very useful for the synthesis of the side chain of statin-type drugs used to decrease cholesterol levels in blood. One of the main challenges in the use of DERA in industrial processes, where high substrate loads are needed to achieve the desired productivity, is its inactivation by high acetaldehyde concentration. In this work, the utility of different variants of Pectobacterium atrosepticum DERA (PaDERA) as whole cell biocatalysts to synthesize 2-deoxyribose 5-phosphate and 2,4,6-trideoxy-D-erythro-hexapyranose was analysed. Under optimized conditions, E. coli BL21 (PaDERA C-His AA C49M) whole cells yields 99 % of both products. Furthermore, this enzyme is able to tolerate 500 mM acetaldehyde in a whole-cell experiment which makes it suitable for industrial applications.     

Intercalated clay structures and amorphous behavior of solution cast and melt pressed poly(ethylene oxide)–clay nanocomposites

The polymer nanocomposite (PNC) films consisted of poly(ethylene oxide) (PEO) and sodium cations montmorillonite (MMT) clay were prepared by aqueous solution casting and direct melt press compounding techniques, whereas the films of PEO with trimethyl octadecyl ammonium cations organo‐modified montmorillonite (OMMT) clay were formed by melt pressed technique. The clay concentrations in the nanocomposites used are 1, 2, 3, 5, 10, and 20 wt % of the PEO weight. The X‐ray diffraction patterns of these nanocomposites were measured in the angular range (2θ) of 3.8–30°. The values of basal spacing d₀₀₁ of MMT/OMMT, clay gallery width W_cg, d‐spacings of PEO crystal reflections d₁₂₀ and d₁₁₂, and their corresponding crystallite size L, and the peaks intensity I (counts) were determined for these nanocomposites. Results reveal that the nanocomposites have intercalated clay structures and the amount of intercalation increases with the increase of clay concentration. As compared to melt pressed PEO–MMT nanocomposites, the amount of clay intercalation is higher in aqueous solution cast nanocomposites. At 20 wt % MMT dispersion in PEO matrix, the solution cast PEO–MMT nanocomposite almost changes into amorphous phase. The melt press compounded PEO–OMMT films show more intercalation as compared to the PEO–MMT nanocomposites prepared by same technique. In melt pressed nanocomposites, the PEO crystalline phase significantly reduces when clay concentration exceeds 3 wt %, which is evidenced by the decrease in relative intensity of PEO principal crystalline peaks. The effect of interactions between the functional group (ethylene oxide) of PEO and layered sheets of clay on both the main crystalline peaks of PEO was separately analyzed using their XRD parameters in relation to structural conformations of these nanocomposites. © 2013 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2014 , 131, 39898.     

Accelerated weathering-induced degradation of unprotected multilayer polyethylene slabs. II

The effect of photodegradation on the properties of multilayer polyethylene slabs was evaluated. It was found that photodegradation causes an increase in the degree of crystallinity accompanied by an increase in the elastic modulus and a decrease in elongation and oxygen permeability. It was shown that oxygen and not UV light is the controlling factor in the photodegradation process. © 1996 John Wiley & Sons, Inc.     

Dielectric spectroscopic studies on polypyrrole glucose oxidase films

An investigation was made into the dielectric spectroscopic characteristics of p-toluene sulfonate (PTS) doped polypyrrole (PPY) films in the presence and absence of immobilized glucose oxidase (GOX) in three different configurations: Al-PTS-PPY-Al-PTS-PPY/GOX-Al, and Al-PTS-PPY/GOX/β-D -glucose-Al, respectively. Measurement of dielectric loss and capacitance yielded valuable information about the dielectric properties of GOX immobilized in PTS doped PPY films. The effect of both the temperature and varying βD -glucose concentrations on the mobility of the charge carriers in these films was also systematically studied. © 1996 John Wiley & Sons, Inc.     

Use of tergitol-7 in photogalvanic cell for solar energy conversion and storage: Toluidine blue-glucose system

Photogalvanic effects were studied in a photogalvanic cell containing toluidine blue, glucose and tergitol-7 as a photosensitizer, reductant and surfactant, respectively. The photocurrent and photopotential generated by this system were 70 μA and 315 mV, respectively. The effects of different parameters on the electrical output of the cell were observed. Current/voltage characteristics of the cell have also been studied, and a mechanism has been proposed for the generation of photocurrent in photogalvanic cell.     

Chemotherapeutic agents. XII [1]. Synthesis of Pyrimidines and Fused Pyrimidines as leishmanicides and herbicides

Various bicyclic ( 2 , 3 ) and tricyclic ( 4 , 5 ) heterocycles were prepared by the reaction of 1a , c with dihaloalkanes and polynitrohalobenzene separately. Electrophilic substitution on 1a–c with different alkyl halides yielded mono and dialkyl pyrimidiens ( 6–20 ). Nucleophilic substitution reactions on 18 and 21 with amine and hydrazine separately yielded 22–31 , 21a , b and 41c . Reaction of 25a with ethyl ethoxymethylenecyanoacetate and chloroacetyl chloride separately provided bicyclic compounds 32 and 33 . Condensation-cyclization of 25a with formic, acetic and nitrous acid separately yielded 34a , b and 35 . Reaction of 26a with ethylthiocylycolate and thiourea separately provided 36a and 39 . The latter was alkylated with methyl iodide to 40 . An attempt to cyclize 29a and 30a with thionyl chloride provided bicyclic compounds 37a , b and an uncyclic product 38 . Some of the compounds were screened for leishmanicidal and herbicidal activities and a few of them exhibited significant activity. Leishmaniasis is considered to be one of the most devastating diseases and is ominous to tropical countries. The high toxicity of leishmanicidal drugs in current use, aroused considerable interest to develop new safer and effective chemotherapeutic agents. The only drug pyrimethamine [2] is the representative of pyrimidine derivatives, known as leishmanicides but low order of activity at high dose failed to retain in the clinic. Based on our past experiences in rational designing of leishmanicidal pyrimidine analogs, incorporation of levamisole pharmacophore either in flexible or rigid forms is indispensable for potential activity [1,3] against visceral leishmaniasis. These observations induced an impetus to synthesize pyrimidine analogs as potential leishmanicides.     

The effect of microencapsulated phase change materials on the rheology of geopolymer and Portland cement mortars

The effect of microencapsulated phase-change materials (MPCM) on the rheological properties of pre-set geopolymer and Portland cement mortars was examined. Microcapsules with hydrophilic and hydrophobic shells were compared. The shear rate dependency of the viscosities fitted well to a double Carreau model. The zero shear viscosities are higher for geopolymer mortar, illustrating poorer workability. The time evolution of the viscosities was explored at shear rates of 1 and 10 s⁻¹. New empirical equations were developed to quantify the time-dependent viscosity changes. The highest shear rate disrupted the buildup of the mortar structures much more than the lower shear rate. Microcapsules with a hydrophobic shell affect the rheological properties much less than the microcapsules with a hydrophilic shell, due to the higher water adsorption onto the hydrophilic microcapsules. Shear forces was found to break down the initial structures within geopolymer mortars more easily than for Portland cement mortars, while the geopolymer reaction products are able to withstand shear forces better than Portland cement hydration products. Initially, the viscosity of geopolymer mortars increases relatively slowly during due to formation of geopolymer precursors; at longer times, there is a steeper viscosity rise caused by the development of a 3D-geopolymer network. Disruption of agglomerates causes the viscosities of portland cement mortars to decrease during the first few minutes, after which the hydration process (increasing viscosities) competes with shear-induced disruption of the structures (decreasing viscosities), resulting in a complex viscosity behavior.     

Consolidation of advanced composites having volatile generation

Processing polyimide-based thermosetting matrix composites is complicated because of gaseous volatiles produced during the polymerization and crosslinking reactions. This process involves complex interactions between part geometry, temperature and force cycles, and matrix/fiber properties. A simple model for the consolidation process that treats these composites as a three-phase system consisting of fiber, resin, and volatile has been developed. This model has been applied to compression molding process for constant thickness laminates and the predictions agree well with experiments. Further extension to handle three-dimensional parts and the required numerical techniques have also been developed.