Cloud Point Extraction of Parabens Using Non-Ionic Surfactant with Cylodextrin Functionalized Ionic Liquid as a Modifier

A cloud point extraction (CPE) process using non-ionic surfactant (DC193C) to extract selected paraben compounds from water samples was investigated using reversed phase high performance liquid chromatography (RP-HPLC). The CPE process with the presence of β-cyclodextrin (βCD) functionalized ionic liquid as a modifier (CPE-DC193C-βCD-IL) is a new extraction technique that has been applied on the optimization of parameters, i.e., pH, βCD-IL concentration and phase volume ratio. This CPE-DC193C-βCD-IL method is facilitated at 30 °C, showing great losses of water content in the surfactant-rich phase, resulting in a high pre-concentration factor and high distribution coefficient. The developed method CPE-DC193C-βCD-IL did show enhanced properties compared to the CPE method without the modifier (CPE-DC193C). The developed method of CPE-DC193C-βCD-IL gives an excellent performance on the detection of parabens from water samples with the limit of detection falling in the range of 0.013–0.038 μg mL⁻¹. Finally, the inclusion complex formation, hydrogen bonding, and π–π interaction between the βCD-IL, benzyl paraben (ArP), and DC 193C were proven using ¹H NMR and 2D NOESY spectroscopy.     

N,N′-alkylated Imidazolium-Derivatives Act as Quorum-Sensing Inhibitors Targeting the Pectobacterium atrosepticum-Induced Symptoms on Potato Tubers

Bacteria belonging to the Pectobacterium genus are the causative agents of the blackleg and soft-rot diseases that affect potato plants and tubers worldwide. In Pectobacterium, the expression of the virulence genes is controlled by quorum-sensing (QS) and N-acylhomoserine lactones (AHLs). In this work, we screened a chemical library of QS-inhibitors (QSIs) and AHL-analogs to find novel QSIs targeting the virulence of Pectobacterium. Four N,N′-bisalkylated imidazolium salts were identified as QSIs; they were active at the μM range. In potato tuber assays, two of them were able to decrease the severity of the symptoms provoked by P. atrosepticum. This work extends the range of the QSIs acting on the Pectobacterium-induced soft-rot disease.     

a-Si:H/SiNW shell/core for SiNW solar cell applications

Vertically aligned silicon nanowires have been synthesized by the chemical etching of silicon wafers. The influence of a hydrogenated amorphous silicon (a-Si:H) layer (shell) on top of a silicon nanowire (SiNW) solar cell has been investigated. The optical properties of a-Si:H/SiNWs and SiNWs are examined in terms of optical reflection and absorption properties. In the presence of the a-Si:H shell, 5.2% reflection ratio in the spectral range (250 to 1,000 nm) is achieved with a superior absorption property with an average over 87% of the incident light. In addition, the characteristics of the solar cell have been significantly improved, which exhibits higher open-circuit voltage, short-circuit current, and efficiency by more than 15%, 12%, and 37%, respectively, compared with planar SiNW solar cells. Based on the current–voltage measurements and morphology results, we show that the a-Si:H shell can passivate the defects generated by wet etching processes.     

Optimization of process parameters using D-optimal design for synthesis of ZnO nanoparticles via sol–gel technique

The experimental conditions for the synthesis of ZnO nanoparticles to produce minimal size were optimized using the D-optimal design. The influence of process parameters involves molar ratio of the starting materials, pH and the calcination temperature on the particle size were evaluated using the polynomial regression. The optimum conditions revealed by the model for obtaining a minimum particle size of ZnO were predicted to have a molar ratio of 1.76, pH of 1.50 and calcination at 402.2 °C. The obtainable particle size upon applying the model is 22.9 nm in compare to experimental result of 18 ± 2 nm was obtained.     

Synthesis of nitrogen incorporated diamond-like carbon thin films using microwave surface-wave plasma CVD

Nitrogenated diamond-like (DLC:N) carbon thin films have been deposited by microwave surface wave plasma chemical vapor deposition on silicon and quartz substrates, using argon gas, camphor dissolved in ethyl alcohol composition and nitrogen as plasma source. The deposited DLC:N films were characterized for their chemical, optical, structural and electrical properties through X-ray photoelectron spectroscopy, UV/VIS/NIR spectroscopy, Raman spectroscopy, atomic force microscope and current–voltage characteristics. Optical band gap decreased (2.7 to 2.4 eV) with increasing Ar gas flow rate. The photovoltaic measurements of DLC:N / p-Si structure show that the open-circuit voltage (V_oc) of 168.8 mV and a short-circuit current density (J_sc) of 8.4 μA/cm² under light illumination (AM 1.5 100 mW/cm²). The energy conversion efficiency and fill factor were found to be 3.4 × 10^{− 4}% and 0.238 respectively.     

Synthesis and Characterization of Magnetically Retrievable Fe3O4/Polyvinylpyrrolidone/Polystyrene Nanocomposite Catalyst for Efficient Catalytic Oxidation Degradation of Dyes Pollutants

Recently, the application of metal oxides such as Fe₃O₄ nanoparticles have wide interest for environmental remediation and treatment of wastewater especially contaminated with azo dyes owing to its high degradation efficacy and low toxicity. The recovery of magnetic catalysts without losing their efficiency is an essential feature in the catalytic applications. The aim of this article is to investigate and synthesis of magnetically retrievable Fe₃O₄/polyvinylpyrrolidone/polystyrene (Fe₃O₄/PVP/PS) nanocomposite for the catalytic degradation of azo dye acid red 18 (AR18). Fe₃O₄/PVP/PS nanocomposite was prepared in two steps. Firstly, PVP/PS microsphere was synthesized by γ-irradiation polymerization of styrene in presence of PVP solution. Secondly, deposition of Fe₃O₄ nanoparticles on PVP/PS microsphere was achieved by the alkaline co-precipitation of Fe³⁺/Fe²⁺ ions. The chemical structural and morphological properties of PVP/PS microsphere and Fe₃O₄/PVP/PS nanocomposite were examined by XRD, TEM, DLS, FTIR, EDX and VSM techniques. TEM results showed homogeneous morphology, spherical shaped and well-dispersed Fe₃O₄ nanoparticles with average particle size of 26 nm around PVP/PS microspheres. The VSM measurements of Fe₃O₄/PVP/PS nanocomposite exhibit excellent magnetic response of saturation magnetization 26.38 emu/g which is suitable in magnetic separation. The effect of the synthesized Fe₃O₄/PVP/PS nanocomposite on the catalytic degradation of AR18 in presence of hydrogen peroxide (H₂O₂) as a heterogeneous Fenton-like catalyst was examined. The catalyst Fe₃O₄/PVP/PS/H₂O₂ played basic role in promoting the oxidation degradation efficiency of AR18 of initial concentration 50 mg/L to 94.4% in 45 min with excellent recyclability till the sixth cycles under the best conditions of pH 3, 2% v/v H₂O₂ and 0.3 g catalyst amount. Furthermore, the Fe₃O₄/PVP/PS/H₂O₂ hybrid catalyst system supports high capability for oxidation degradation of mixture of different dyes. The Fe₃O₄/PVP/PS nanocomposite catalyst had high magnetic and recyclability characters which are acceptable for the treatment of wastewater contaminated by various dyes pollutants.

     

Enhancing Photophysical Properties of MDMO-PPV-DMP Conjugated Polymer via Incorporation Anatase Titania Nanoparticles

Improving photophysical properties of poly[2-methoxy-5-(3,7-dimethyl-octyloxy)-1,4-phenylenevinylene]-end capped with dimethylphenyl, MDMO-PPV-DMP, was achieved via incorporation anatase titania nanoparticles (TiO₂ NPs). Various contents of TiO₂ NPs (up to 50 wt%) were dispersed into fixed concentration of the MDMO-PPV-DMP (5 mg/mL) via solution blending method followed by spin coating onto cleaned glass substrates to form their thin films. The formation of MDMO-PPV-DMP/TiO₂ nanocomposites was evidenced from the results of X-ray diffractograms and Fourier transform infrared spectra, while the homogeneity of the films was detected by field emission-scanning electron microscopy (FE-SEM). Increasing the contents of TiO₂ NPs resulted in a slight decrease (up to ~?0.07 eV) in both direct and indirect energy band gaps of the MDMO-PPV-DMP in the nanocomposite thin films. A higher degree of disorder in the electronic structure of the MDMO-PPV-DMP/TiO₂ nanocomposite and increasing the localized states density within the forbidden gap can be achieved by increasing the energy tail values and decreasing the steepness parameter with rising the TiO₂ NPs content. The enhancement in emission intensity and broadening of emission spectra with increasing the TiO₂ NPs content can be explained by the charge trapping effect and particle size distribution, respectively. Moreover, the incorporation of TiO₂ NPs into the MDMO-PPV-DMP led to tuning its emitted light color which is of distinct interest in optoelectronic devices.

     

Gut Microbiota and Short Chain Fatty Acids: Implications in Glucose Homeostasis

Gut microbiota encompasses a wide variety of commensal microorganisms consisting of trillions of bacteria, fungi, and viruses. This microbial population coexists in symbiosis with the host, and related metabolites have profound effects on human health. In this respect, gut microbiota plays a pivotal role in the regulation of metabolic, endocrine, and immune functions. Bacterial metabolites include the short chain fatty acids (SCFAs) acetate (C2), propionate (C3), and butyrate (C4), which are the most abundant SCFAs in the human body and the most abundant anions in the colon. SCFAs are made from fermentation of dietary fiber and resistant starch in the gut. They modulate several metabolic pathways and are involved in obesity, insulin resistance, and type 2 diabetes. Thus, diet might influence gut microbiota composition and activity, SCFAs production, and metabolic effects. In this narrative review, we discuss the relevant research focusing on the relationship between gut microbiota, SCFAs, and glucose metabolism.     

Graft Copolymerization of Acrylamide onto Oil Palm Empty Fruit Bunch (OPEFB) Fiber

Grafting of acrylamide (AAm) onto oil palm empty fruits bunch fiber using hydrogen peroxide as initiator and methyl acrylate as comonomer was investigated. The amount of comonomer needed to make grafting of acrylamide possible was determined. The percentage of poly(acrylamide) and the comonomer in the final graft copolymer was estimated by elemental analysis. Results obtained indicated that methyl acrylate facilitated the incorporation of acrylamide monomer onto OPEFB. The reactivity ratios for both monomers were determined by using Fineman–Ross plot. The effects of reaction temperature and period as well as amount of the initiator, solvent, monomer and comonomer on the percentage of grafting at fixed amount of comonomer (11 mmol) were studied. Maximum percentage of grafting was achieved when the amount of initiator and solvent 3.98×10⁻³ mol and 50 mL respectively. The optimum reaction temperature was 50 ^○C and the reaction period was 90 min. Highest percentage of grafting was 232% when 25.6 mmol of acrylamide was used under these optimum conditions. The presence of functional group in the grafted polymer is characterized by infrared spectroscopy and the surface morphology is observed by scanning electron microscopy. Thermoanalytic investigation on OPEFB and OPEFB-g-PAAM were carried out to evaluate the thermal stability and respective activation energy of the materials.     

Deposition and characterisation of TiO2 coatings on various supports for structured (photo)catalytic reactors

Different types of aqueous TiO₂–P25 suspensions were prepared and their properties, including rheological behaviour and zeta potential, were studied. Then, TiO₂ suspensions were used to elaborate TiO₂ coatings on various substrates (cordierite monolith, stainless steel plates and -SiC foam) using a dip-coating method. The relationship between the suspension stability and the coating adhesion has been considered. The structural and morphological characterisation of TiO₂ coatings has been performed using scanning electron microscopy, X-ray diffraction and other methods. Finally, the photocatalytic properties of the materials have been determined by studying the photooxidation of aqueous ammonia.