Immersive electronic books for surgical training

Immersive electronic books (IEBooks) for surgical training will let surgeons explore previous surgical procedures in 3D. The authors describe the techniques and tools for creating a preliminary IEBook, embodying some of the basic concepts.     

The effect of support morphology on the reaction of oxidative dehydrogenation of ethane to ethylene at short contact times

The oxidative dehydrogenation of ethane is carried out in short contact time reactors over Pt and LaMnO₃ based catalysts supported on a large number of different ceramic substrates (45, 60 and 80 ppi foam monoliths and 200, 400, 600, 900 and 1200 cpsi honeycomb monoliths). Experimental results, obtained under the same conditions at varying the C₂H₆/O₂ ratio, showed that the highest performance in terms of ethylene selectivity and yield is always attained on LaMnO₃ catalysts. Furthermore, the results are significantly influenced by the morphology and cell density of the support, with 45 and 60 ppi foams and 400 and 600 cpsi honeycombs giving the best performance. The experimental results are explained by means of geometrical and fluid dynamic considerations on the support, and by means of a 2D mathematical model, which clearly indicates an optimal intermediate cell density for maximising ethylene selectivity and yield.     

Resonant Quantum Phenomena for an rf-SQUID: Moderate Underdamped and Extreme Underdamped Limit

We study the resonant quantum behaviour of a macroscopic superconducting system interacting with an external field. First we consider the resonant tunneling assisted by microwave frequency in the moderate underdamped quantum regime. Then we consider the resonant process in the extreme underdamped limit. In both regimes we have investigated a small frequency range, where resonant phenomena take place. The transition probability W from the left to the right potential well has been numerically calculated for an rf-SQUID as function of the external flux φ _x for both regimes. Results indicate that, in a proper frequency and φ _x range, the transition probability W can present two or three resonant peaks, depending on the damping regime.     

Single and combined deactivating effect of alkali metals and HCl on commercial SCR catalysts

Two commercial SCR catalysts, with a nominal W content of about 9 wt.% and a V nominal content of 0.55 and 1.8 wt.%, respectively, were contacted with different amounts of Na and K and with HCl vapours in order to simulate poisoning by species more specifically contained in exhaust gases from MSW combustion. Catalysts were characterised using XRD analysis, SEM/EDX analysis, BET and pore size distribution measurements, NH₃ TPD, TG analysis. Poisoning agents do not cause loss of surface area nor pore occlusion. A significant loss of surface acidity was observed upon alkali metals poisoning whereas a decreasing of vanadium content was observed for the more concentrated catalysts upon HCl poisoning. Catalysts deactivation is proportional to the number of acid sites neutralised by alkali metals adsorbing ammonia in the temperature range typical of SCR process. HCl promotes the formation of new acid sites showing a lower activity compared to the original one.     

Role of p53 gene in colorectal neoplasms

A prospective study on the role of the p53 gene in sporadic colorectal neoplasms is presented and the level of mutant p53 protein was measured in the tissue removed during colonoscopy from: patients previously operated for colorectal malignant neoplasms, patients with active neoplasms, first degree relatives and during regular checks. 72% of patients with an active tumour showed a positive p53 and 38% in follow-up checks. Longer follow-up periods and a major number of patients are necessary to assess the prognostic importance of the p53 protein.     

Myringoplasty in children: factors influencing surgical outcome

Experiments were designed to evaluate whether guanosine 3',5'-cyclic monophosphate (cGMP)-mediated mechanisms contribute to vasodilation via propofol in rat mesenteric resistance arteries. Ring segments were suspended in the myograph system for isometric tension recording, and responses to propofol were tested in the presence and absence of methylene blue (MB), an inhibitor of guanylate cyclase. At concentrations > or = 1 microM, propofol caused concentration-dependent relaxation of vessel rings precontracted with U46619 (a thromboxane analog). The effect was not affected by N-monomethyl-L-arginine (L-NMMA; 50 microM). MB (5 microM) reversed propofol-induced vasodilation by 30% (p < 0.001). In contrast, MB has no effect on nifedipine-inhibited vasocontraction. The propofol-induced relaxation was further tested in rings incubated in Ca2+-free solution. U46619-induced contractions were significantly reduced by propofol (40 microM) but not by nifedipine (1 microM). Propofol reduced to a similar degree the contractions obtained to exogenously added calcium chloride in the absence and the presence of MB. Furthermore, propofol (10-100 microM) increased cGMP content in cultured bovine vascular smooth-muscle cells. Soluble guanylate cyclase inhibitors, such as MB and LY83583, attenuated this effect. This investigation suggests that propofol-induced relaxations in small arteries, in addition to inhibition of calcium influx, are mediated by increases of cGMP in the smooth muscle cells.     

Structural optimization strategies to design green products

This paper addresses the need for a structured approach to environmental assessment and improvement. We propose a computer-aided methodology, named Eco-OptiCAD, based on the integration of Structural Optimization and Life Cycle Assessment (LCA) tools. Eco-OptiCAD supports the designer during product development, highlighting when and where the core of the environmental impact lies. Furthermore, it provides effective tools to address such impacts, improving the original product, while ensuring structural and functional requirements. It foresees the synergic use of (1) virtual prototyping tools, such as 3D CAD, Finite Element Analysis (FEA) and Structural optimization, (2) function modeling methodology and (3) Life Cycle Assessment (LCA) tools. The kernel of the methodology is constituted by a set of optimization strategies and a module, named Life Cycle Mapping (LCM). In particular, we have conceived ten optimization strategies converting environmental objectives and constraints into structural and geometrical parameters. They enable the designer to generate alternative green scenarios according to the triad shape–material–production. The LCM tool has been specifically developed to easily trace the growth of environmental impacts throughout the product's life cycle and allow the user to focus his effort on the most relevant aspects. Thanks to the integration of the structural optimizer with an LCA map, the designer becomes aware of the consequences that each change in the geometry, the material or the manufacturing process will produce on the environmental impact of the product throughout its life cycle. With a complete view of the product life cycle, the designer can improve a single phase, while retaining a global perspective; thus avoiding the possibility of gaining a local green improvement at the cost of a global increase in environmental impacts.     

Dissolution of perfluoroalkyl oligomers in lubricating oil for enhancing wear resistance and fuel economy

Perfluorobutyl-1,1,2-tri-H-1-hexene and perfluoroalkyl methacrylate have been solubilized in lubricating oil by single-step free radically grafting onto poly(ethylene-co-propylene). Perfluoroalkyl-1,1,2,2-tetra-H-ethanol and perfluoropolyether carboxylic acid were solubilized by condensing with poly[(ethylene-co-propylene)-g-glycidyl methacrylate], generating the corresponding perfluoroalkyl ether or ester, respectively. Solubilization of 1,1,2,2-tetra-H-ethanol was also achieved by condensing with poly[(ethylene-co-propylene)-g-2-isocyanoethyl methacrylate] to the corresponding perfluoroalkyl urethane. Scar diameter reductions ranged from 9.4 to 58% using perfluoro-modified graft copolymers as determined using the Four Ball Wear Test, although optimum reductions were obtained using perfluoroalkyl urethane-modified graft copolymers. Moreover, a semiquantitative correlation of scar reductions and thermal instability was determined. Sequence VI engine testing of perfluoroalkyl urethane graft copolymers containing pendant perfluoroalkyl chain lengths of 8.2 and 7.2 had an Equivalent Fuel Economy Index of 4.33 and 4.27, respectively. © 1994 John Wiley & Sons, Inc.     

Molecular orientation in drawn smectic and crystalline isotactic polypropylene

The drawing behavior of two polypropylene films of different structures was analyzed. The two films differ as a consequence of different quenching conditions. At low temperature, a biphasic smectic-amorphous system was obtained, while quenching at 100°C produced a biphasic crystalline-amorphous system. The drawing of samples was carried out at 110°C at which temperature the smectic phase is not stable and is transformed into the crystalline α-form. The initial structure affects the drawing behavior and the properties of the drawn samples. The mechanical, optical, and X-ray analyses clearly show that high molecular orientation is achieved at lower deformations in the initially smectic sample. In particular, the amorphous phase is highly oriented, inducing higher axial elastic modulus.