N2O catalytic decomposition over various spinel-type oxides

Various spinel-type catalysts AB₂O₄ (where A = Mg, Ca, Mn, Co, Ni, Cu, Cr, Fe, Zn and B = Cr, Fe, Co) were prepared and characterized by XRD, BET, TEM and FESEM-EDS. The performance of these catalysts towards the decomposition of N₂O to N₂ and O₂ was evaluated in a temperature programmed reaction (TPR) apparatus in the absence and the presence of oxygen. Spinel-type oxides containing Co at the B site were found to provide the best activity. The half conversion temperature of nitrous oxide over the MgCo₂O₄ catalyst was 440 °C and 470 °C in the absence and presence of oxygen, respectively (GHSV = 80,000 h⁻¹).

On the grounds of temperature programmed oxygen desorption (TPD) analyses as well as of reactive runs, the prevalent activity of the MgCo₂O₄ catalyst could be explained by its higher concentration of suprafacial, weakly chemisorbed oxygen species, whose related vacancies contribute actively to nitrous oxide catalytic decomposition. This indicates the way for the development of new, more active catalysts, possibly capable of delivering at low temperatures amounts of these oxygen species even higher than those characteristic of MgCo₂O₄.     

Real-time digital control of optical interferometers by the mechanical-modulation technique

We discuss the application of digital systems to the automatic control of dual-wave optical interferometers. We show that, if the mechanical-modulation technique is used for error-signal extraction, digital techniques can be used both for error-signal extraction and for control-signal generation. Therefore, apart from two front/end amplifiers that are necessary to match the dynamics of the detectors and actuators to the dynamics of the analog-to-digital converters and digital-to-analog converters, no other analog devices are required. In particular, the mechanical-modulation technique requires the synchronous demodulation of the photodiode output signal. Hence we need to implement a digital lock-in amplifier whose algorithm is described here. Finally, we describe one of the possible applications of this digital control procedure, such as the control of a classic Mach-Zehnder interferometer in air.     

Long Duration Persistent Photocurrent in 3 nm Thin Doped Indium Oxide for Integrated Light Sensing and In-Sensor Neuromorphic Computation

Miniaturization and energy consumption by computational systems remain major challenges to address. Optoelectronics based synaptic and light sensing provide an exciting platform for neuromorphic processing and vision applications offering several advantages. It is highly desirable to achieve single-element image sensors that allow reception of information and execution of in-memory computing processes while maintaining memory for much longer durations without the need for frequent electrical or optical rehearsals. In this work, ultra-thin (<3 nm) doped indium oxide (In₂O₃) layers are engineered to demonstrate a monolithic two-terminal ultraviolet (UV) sensing and processing system with long optical state retention operating at 50 mV. This endows features of several conductance states within the persistent photocurrent window that are harnessed to show learning capabilities and significantly reduce the number of rehearsals. The atomically thin sheets are implemented as a focal plane array (FPA) for UV spectrum based proof-of-concept vision system capable of pattern recognition and memorization required for imaging and detection applications. This integrated light sensing and memory system is deployed to illustrate capabilities for real-time, in-sensor memorization, and recognition tasks. This study provides an important template to engineer miniaturized and low operating voltage neuromorphic platforms across the light spectrum based on application demand.     

Multimedia ontology population through semantic analysis and hierarchical deep features extraction techniques

Knowledge and Information Systems - The rapid increase of available data in different complex contexts needs automatic tasks to manage and process contents. Semantic Web technologies represent the...     

Laser pyrolysis in papers and patents

Journal of Intelligent Manufacturing - This paper presents a critical review of laser pyrolysis. Although this technology is almost 60&nbsp;years old, in literature many researchers, both from...     

Tunable electrochemistry of gold-silver alloy nanoshells

Nano Research - The widespread and increasing interest in enhancing biosensing technologies by increasing their sensitivities and lowering their costs has led to the exploration and application of...     

Genetic effects of 1,3-butadiene and associated risk for heritable damage

A summary of the results of the studies conducted in the EU Project "Multi-endpoint analysis of genetic damage induced by 1,3-butadiene and its major metabolites in somatic and germ cells of mice, rats and man" is presented. Results of the project are summarized on the detection of DNA and hemoglobin adducts, on the cytotoxic and clastogenic effects in somatic and germinal cells of mice and rats, on the induction of somatic mutations at the hprt locus of experimental rodents and occupationally exposed workers, on the induction of dominant lethal mutations in mice and rats, and on heritable translocations induced in mice, after exposure to butadiene (BD) or its major metabolites, butadiene monoepoxide (BMO), diepoxybutane (DEB) and butadiene diolepoxide (BDE). The primary goal of this project was to collect experimental data on the genetic effects of BD in order to estimate the germ cell genetic risk to humans of exposure to BD. To achieve this, the butadiene exposure are based on data for heritable translocations and bone marrow micronuclei induced in mice and chromosome aberrations observed in lymphocytes of exposed workers. A doubling dose for heritable translocations in human germ cells of 4900 ppm/h is estimated, which, assuming cumulative BD exposure over the sensitive period of spermatogenesis, corresponds to 5-6 weeks of continuous exposure at the workplace to 20-25 ppm. Alternatively, the rate of heritable translocation induction per ppm/h of BD exposure is estimated to be approximately 0.8 per million live born, compared to a spontaneous incidence of balanced translocations in humans of approximately 800 per million live born. These estimates have large confidence intervals and are only intended to indicate orders of magnitude of human genetic risk. These risk estimates are based on data from germ cells of BD-exposed male mice. The demonstration that clastogenic damage was induced by DEB in preovulatory oocytes at doses which were not ovotoxic implies that additional studies on the response of mammalian female germ cells to BD and its metabolites are needed. The basic assumption of the above genetic risk estimates is that experimental mouse data obtained after BD exposure can be extrapolated to humans. Several points exist in the present report and in the literature which contradict this assumption: (1) the level of BMO-hemoglobin adducts was significantly elevated in BD-exposed workers; however, it was considerably lower than would have been predicted from comparable rat and mouse exposures; (2) the concentrations of the metabolites DEB and BMO were significantly higher in mouse than in rat blood after BD exposure. Thus, while metabolism of BD is qualitatively similar in the two species, it is quantitatively different; (3) no increase of HPRT mutations was shown in 19 workers exposed on average to 1.8 ppm of BD, while in a different population of workers from a US plant exposed on average to 3.5 ppm of BD, a significant increase of HPRT variants was detected; and (4) data from cancer bioassays and cancer epidemiology suggest that rat is a more appropriate model than mouse for human cancer risk from BD exposure. However, the dominant lethal study in rats gave a negative result. At present, we do not know which BD metabolite(s) may be responsible for the genetic effects even though the bifunctional alkylating agent DEB is the most likely candidate for the induction of clastogenic events. Unfortunately, methods to measure DEB adducts in hemoglobin or DNA are only presently being developed. Despite these several uncertainties the use of the mouse genetic data is regarded as a justifiable and conservative approach to human genetic risk estimation given the considerable heterogeneity observed in the biotransformation of BD in humans.     

Numerical simulation of steady planar die swell for a Newtonian fluid using the spectral element method

This paper is concerned with two dimensional numerical simulations of plane extrusion of a Newtonian fluid. The problem is discretized using the spectral element method and the free surface is evolved according to an ALE treatment. Numerical simulations are performed over a wide range of Reynolds and Weber numbers to highlight the effects of inertia and surface tension, respectively. Convergence of the numerical approximations with respect to polynomial order is demonstrated for the sensitive measures of free surface location and downstream relaxation distance. The higher the inertia the further downstream the relaxation occurs. Numerical results show good qualitative and quantitative agreement with predictions of other numerical schemes and experiments.     

Path dependent stochastic models to detect planned and actual technology use: A case study of OpenOffice

Context

Adopting IT innovation in organizations is a complex decision process driven by technical, social and economic issues. Thus, those organizations that decide to adopt innovation take a decision of uncertain success of implementation, as the actual use of a new technology might not be the one expected. The misalignment between planned and effective use of innovation is called assimilation gap.

Objective

This research aims at defining a quantitative instrument for measuring the assimilation gap and applying it to the case of the adoption of OSS.

Method

In this paper, we use the theory of path dependence and increasing returns of Arthur. In particular, we model the use of software applications (planned or actual) by stochastic processes defined by the daily amounts of files created with the applications. We quantify the assimilation gap by comparing the resulting models by measures of proximity.

Results

We apply and validate our method to a real case study of introduction of OpenOffice. We have found a gap between the planned and the effective use despite well-defined directives to use the new OS technology. These findings suggest a need of strategy re-calibration that takes into account environmental factors and individual attitudes.

Conclusions

The theory of path dependence is a valid instrument to model the assimilation gap provided information on strategy toward innovation and quantitative data on actual use are available.