Microwave assisted water extraction of plant compounds

The development of environmentally friendly processes with limited generation of polluting streams to attain sustainable utilization of raw materials is encouraged. The implementation of novel extraction technologies more efficient, selective and with lower energy consumption than conventional ones, can help in achieving this objective. Particularly promising are aqueous based methods, since water is a cheap, safe and abundant solvent and the limited use of toxic organic solvents is a consumer's, ecological and processing demand. The benefits and the limiting aspects of microwave assisted water extraction, either adding water as the only solvent or in solvent free processes, using the naturally present water in vegetal materials for the extraction of valuable components from renewable vegetal sources are highlighted and the potential of this technique for industrial applications is discussed. © 2014 Society of Chemical Industry     

Solution‐Controlled Dissolution of Supplementary Cementitious Material Glasses at pH 13: The Effect of Solution Composition on Glass Dissolution Rates

Supplementary cementitious materials (SCMs) are widely used to partially replace portland clinker in blended cements. Reducing clinker contents further without compromising the development of early strength necessitates a better assessment and enhancement of the reactivity of the available SCMs. To this purpose, the reactivity of synthesized calcium aluminosilicate glasses covering a compositional range from blast‐furnace slags (BFS) over fly ashes to silica fume was analyzed by dissolution experiments. Initial glass dissolution rates were measured at 20°C and pH 13, and with varying initial concentrations of aqueous Al, Ca, and Si. At pH 13, glass dissolution rates were observed to scale linearly with the glass Ca/(Al + Si) molar ratio. Ca‐rich blast‐furnace type glass dissolution was shown to be up to one order of magnitude faster than tectosilicate fly ash and silica fume type glass dissolution, supporting different pathways to dissolution. In solutions that are strongly undersaturated with respect to hydrous glass and hydration products, glass dissolution rates are independent of changes in solution undersaturation and aqueous Si activity. In contrast, dissolution rates decrease with aqueous Ca concentration for all glasses and with aqueous Al concentration for tectosilicate‐type glasses. The insights gained are instrumental in finding ways to enhance SCM reactivity.     

Does the Neuroprotective Role of Anandamide Display Diurnal Variations?

The endocannabinoid system is a component of the neuroprotective mechanisms that an organism displays after traumatic brain injury (TBI). A diurnal variation in several components of this system has been reported. This variation may influence the recovery and survival rate after TBI. We have previously reported that the recovery and survival rate of rats is higher if TBI occurs at 1:00 than at 13:00. This could be explained by a diurnal variation of the endocannabinoid system. Here, we describe the effects of anandamide administration in rats prior to the induction of TBI at two different times of the day: 1:00 and 13:00. We found that anandamide reduced the neurological damage at both times. Nevertheless, its effects on bleeding, survival, food intake, and body weight were dependent on the time of TBI. In addition, we analyzed the diurnal variation of the expression of the cannabinoid receptors CB1R and CB2R in the cerebral cortex of both control rats and rats subjected to TBI. We found that CB1R protein was expressed more during the day, whereas its mRNA level was higher during the night. We did not find a diurnal variation for the CB2R. In addition, we also found that TBI increased CB1R and CB2R in the contralateral hemisphere and disrupted the CB1R diurnal cycle.     

Toward the prediction of porous membrane permeability from morphological data

One of the challenges in membrane technology is predicting permeability in porous membranes for liquid applications in an easy and inexpensive way. This is the aim of this work. To achieve this objective, several techniques can be considered. In this study, a morphological approach from two‐dimensional scanning electron micrographs is proposed. First, numerical membrane morphological parameters have been determined from micrographs by using the QUANTS tool, which applies a texture recognition process. Second, the obtained data have been fit to the Darcy's and Hagen–Poiseuille models to calculate permeations. The QUANTS results have also been compared with the ones obtained through a mercury porosimeter, which is a classic and well‐known methodology. Each parameter of the Hagen–Poiseuille model has been analyzed. A comparison between experimentally measured permeations and calculated ones has been performed. An even easier approach is proposed to predict flow rate with the only knowledge of membrane surface mean pore size. This method is based on cross‐section pore size interpolation by using function fits from surface mean pore sizes. The obtained results show a reasonable agreement between measured and computed results, making this technique a valid approach for predicting membrane permeability. POLYM. ENG. SCI., 56:118–124, 2016. © 2015 Society of Plastics Engineers     

N‐Arylsulfonyl Indolines as Retinoic Acid Receptor‐Related Orphan Receptor γ (RORγ) Agonists

The nuclear retinoic acid receptor‐related orphan receptor γ (RORγ; NR1F3) is a key regulator of inflammatory gene programs involved in T helper 17 (T_H17) cell proliferation. As such, synthetic small‐molecule repressors (inverse agonists) targeting RORγ have been extensively studied for their potential as therapeutic agents for various autoimmune diseases. Alternatively, enhancing T_H17 cell proliferation through activation (agonism) of RORγ may boost an immune response, thereby offering a potentially new approach in cancer immunotherapy. Herein we describe the development of N‐arylsulfonyl indolines as RORγ agonists. Structure–activity studies reveal a critical linker region in these molecules as the major determinant for agonism. Hydrogen/deuterium exchange coupled to mass spectrometry (HDX‐MS) analysis of RORγ–ligand complexes help rationalize the observed results.     

Crosslinking reactions and swelling behavior of matrices based on N-acryloyl-TRIS(hydroxymethyl)aminomethane

Summary In this study, new hydrogels in rod shape were prepared from N-acryloyl-TRIS(hydroxymethyl)aminomethane (NAT) using ethylene glycol dimethacrylate (EGDMA) or N,N’methylenebisacrylamide (BIS) as crosslinking agent, dimethylformamide (DMF) as solvent and benzoyl peroxide (BPO) as initiator. In most cases, 2-hydroxyethyl methacrylate (HEMA), acrylamide (Aam) or acrylic acid (Aac) were used as co-monomers. The polymeric matrices obtained by free radical polymerization exhibited different properties by changing crosslinker, crosslinker concentration, co-monomer and initial NAT/co-monomer mole ratio. Besides, hydrogels from HEMA, Aam and Aac with BIS in absence of NAT were prepared under the same experimental reaction conditions in order to compare the properties of these products with those synthesized from NAT and the respective co-monomers. Some of the final products were selected to perform urea release assays, conducted through swelling-controlled release. Urea was chosen as “model” plant fertilizer agent.     

Ethylene Hydrogenation over Pt/Ga2O3/Al2O3 Catalysts

The effects of gallia addition on the Pt dispersion and the activity for ethylene hydrogenation at 0 °C were studied for Pt-supported catalysts as a function of the reduction temperature (350, 450, and 550 °C). The catalysts contained 0.5 wt.% Pt and were prepared by successive incipient wetness impregnations with Ga(NO₃)₃ and H₂PtCl₆ aqueous solutions. CO and H₂ chemisorption data indicated that, the addition of small amount of Ga₂O₃ caused an increase of the Pt dispersion and a decrease of ethylene conversion. Both of them decreased appreciably when Ga₂O₃ addition was increased, particularly, for the case where β-Ga₂O₃ was used as a support. The increase in reduction temperature magnified the negative effects of the gallia addition on dispersion and activity, although the addition of small amount of gallia improved the resistance to metal sintering. Results were interpreted in terms of the presence of reduced Ga species, which can encapsulate Pt particles.     

Diffusion of NaOH into a protein gel

The diffusivity of NaOH in a layer of protein gel on an inert surface is measured by combining experimental study of the reactive dissolution of the gel with simulation of transport and reaction within the gel. Pure β-lactoglobulin gels, formed under three different gelation conditions, were used as a model system. The alkaline solutions cause the gel to swell, and destroy the interprotein interactions in the gel matrix. The swelling and cleavage reactions depend on the local concentration of hydroxide and so are sensitive to the rate of transport of hydroxide through the gel. Experiments were performed to determine the effect of the NaOH concentration on the hydroxide penetration thickness and on the velocity of the penetration front marked by phenolthalein indicator. Simple simulations and a more advanced semi-theoretical analysis were performed, with proteins being treated as ideal polyelectrolyte polymers. Both yielded good agreement with the experimental results. The effective diffusivity of NaOH in the protein gels was found to be similar to that in water. The analytical procedure can be extended in principle to any protein gel.     

Structural Cues for Understanding eEF1A2 Moonlighting

Spontaneous mutations in the EEF1A2 gene cause epilepsy and severe neurological disabilities in children. The crystal structure of eEF1A2 protein purified from rabbit skeletal muscle reveals a post-translationally modified dimer that provides information about the sites of interaction with numerous binding partners, including itself, and maps these mutations onto the dimer and tetramer interfaces. The spatial locations of the side chain carboxylates of Glu301 and Glu374, to which phosphatidylethanolamine is uniquely attached via an amide bond, define the anchoring points of eEF1A2 to cellular membranes and interorganellar membrane contact sites. Additional bioinformatic and molecular modeling results provide novel structural insight into the demonstrated binding of eEF1A2 to SH3 domains, the common MAPK docking groove, filamentous actin, and phosphatidylinositol-4 kinase IIIβ. In this new light, the role of eEF1A2 as an ancient, multifaceted, and articulated G protein at the crossroads of autophagy, oncogenesis and viral replication appears very distant from the “canonical” one of delivering aminoacyl-tRNAs to the ribosome that has dominated the scene and much of the thinking for many decades.