三峡水库汛期“蓄清排浑”动态运用方式计算研究

在入库沙量大幅减少的背景下,三峡水库持续开展汛期中小洪水调度,增大了汛期库区泥沙淤积和防洪风险,减少了水库下泄大流量的机会。在三峡水库汛期,开展“蓄清排浑”泥沙调度方式动态运用研究有助于进一步优化三峡水库汛期调度方式。利用三峡水库干支流河道一维非恒定流数学模型,探索开展了三峡水库汛期 “蓄清排浑”动态运用方式计算研究,并提出了汛期“蓄清排浑”动态运用方案。计算结果表明:三峡水库汛期“蓄清排浑”动态运用方式可以同时兼顾排沙、发电和防洪,“蓄清”水位150 m要优于155 m,“蓄清”运行期间库水位可选择在145~150 m之间浮动运行;建议将寸滩含沙量达到2.0 kg/m³且当日寸滩站入库流量≥25 000 m³/s的时间作为水库增泄“排浑”的起始时间,将出库含沙量降至约0.1 kg/m³作为“排浑”调度结束重新进入“蓄清”调度的泥沙参考因素。研究成果可为三峡水库汛期优化调度提供参考。     

长江源区浮游植物群落特征与水环境因子关系研究

为研究长江源头区域河流浮游植物群落结构与水环境因子的关系,于2017年5,8,9月份和2018年5,7,9月份在长江源区进行调查分析,并对浮游植物及水环境因子进行了Pearson相关性分析和典范排序分析。结果表明,共发现浮游植物6门79种,以硅藻门和蓝藻门为主。各采样点浮游植物平均密度71.66×10⁴ ind./L。典范分析表明,温度、化学需氧量、高锰酸盐指数、氨氮、总氮、溶解氧是影响长江源区河流浮游植物群落结构的主要因子。研究成果有助于了解长江源头地区浮游植物群落特征,为三江源生态保护提供数据支撑。     

利用废旧胶粉改善红黏土工程性质试验研究

随着废旧轮胎的日益剧增,回收利用率较低带来了严重的环保问题。利用废旧轮胎胶粉对红黏土进行改良,形成混合土。通过标准轻型击实试验、等效击实试验、直剪试验以及渗透试验,研究了不同胶粉掺量(0%,3%,8%,15%,25%)和不同含水量对混合土的击实特性、抗剪强度特性以及渗透性的影响。研究结果表明:①混合土的最大干密度比原状红黏土低,且胶粉的掺量越大,最大干密度越小;②胶粉掺量增大,标准击实试验的最优含水率增大,等效击实试验的最优含水率有减小趋势;③胶粉掺量不超过15%时,随着胶粉掺量增大,混合土的抗剪强度增大,内摩擦角增大,且出现应变硬化现象:④标准击实下,胶粉掺量为8%时,混合土的渗透速率变化不明显;但胶粉掺量增加到15%时,混合土的渗透速率显著提高,提升幅度达到97.3%。研究成果可为贵州地区今后废旧胶粉的循环利用和胶粉改良红黏土的工程运用提供参考。     

不同耕作措施及玉米生育期对黄壤坡耕地土壤团聚体稳定性的影响

为探讨耕作措施和玉米季对黄壤坡耕地土壤团聚体稳定性的影响,以横坡垄作坡面为研究对象,顺坡垄作坡面为对照,研究野外自然降雨条件下玉米季黄壤坡耕地土壤团聚体组成及其稳定性的变化特征,以期为山地黄壤区土壤抗蚀性研究提供理论依据。结果表明:①不同耕作措施对玉米种植土壤团聚体组成和稳定性影响显著,横坡垄作坡面较顺坡垄作含有更多大粒级团聚体;以(10,0.25]mm水稳性团聚体(WSA_>0.25)、平均质量直径(MWD)、几何平均直径(GMD)、结构体破坏率(PAD)、水稳性团聚体分形维数(D)、团聚体稳定性系数(ASI)为指标进行分析,得出横坡垄作坡面土壤团聚体稳定性较顺坡垄作坡面好。②随玉米生育期的推进,土壤大粒级团聚体含量及团聚体稳定性均呈现出显著升高的趋势,且在成熟期达极大值,表明玉米生育期也显著影响土壤团聚体组成及稳定性。③相关性分析得出,团聚体稳定性与根系密度、根表面积、根体积呈极显著正相关关系,根系的发育对增强研究区土壤团聚体稳定性具有重要的贡献。适宜的耕作措施和合理的种植模式均有助于研究区水土流失的有效防控。     

区间时变时滞离散系统的稳定性分析及控制器设计

含有区间状态时滞的系统在实际中有重要的应用,如它可以方便地描述一类网络控制系统.本文对含有区间状态时滞的线性离散系统考虑了稳定性分析与状态反馈控制器设计问题.为研究该类系统的稳定性,通过引入二重求和和三重求和构造了新型的Lyapunov-Krasovskii泛函.在对所构造的泛函处理其差分的过程中,利用了基于Abel引理的有限和不等式技术以及时滞分割方法,进而提出了该类系统稳定的线性矩阵不等式充分性条件.相对于以往的Lyapunov泛函,本文所提出的Lyapunov-Krasovskii泛函包含更多的时滞信息,而且所采用的差分处理方法不涉及原系统的模型变化,因而所提出的渐近稳定充分条件具有较低保守性.另外,相对于以前存在的自由权矩阵方法,本文所提出的方法具有较少的可行性变量矩阵,因而能有效地降低计算量.基于所提出的稳定性条件,本文进一步提出了无记忆状态反馈镇定控制器的设计方法.所提出镇定控制器设计方法也通过线性矩阵不等式给出,具有很好的数值稳定性.最后,通过数值算例验证了所提方法的正确性和有效性.     

Wear behavior of <Emphasis Type="Italic">in-situ</Emphasis> TiC particles reinforced aluminum matrix composite

The microstructure, tensile property and wear resistance of 7075 aluminum matrix composite reinforced with TiC particles prepared by in-situ reaction casting were investigated. The effect of TiC reinforcement on wear behavior was analyzed. The wear mechanism was also discussed. A micro-mechanism model of reaction kinetics for synthesis of TiC was acquired. Results show that TiC could increase the tensile and yield strength, but decrease the elongation. Besides, TiC particles improve the property of wear resistance of 7075 aluminum alloy. The wear mechanisms include abrasive wear and adhesive wear in wear test process.     

Effect of deposition time on microstructures and growth behavior of ZrC coatings prepared by low pressure chemical vapor deposition with the Br<Subscript>2</Subscript>-Zr-C<Subscript>3</Subscript>H<Subscript>6</Subscript>-H<Subscript>2</Subscript>-Ar System

ZrC coatings were deposited on graphite substrates by low pressure chemical vapor deposition (LPCVD) with the Br₂-Zr-C₃H₆-H₂-Ar system. The effects of deposition time on the microstructures and growth behavior of ZrC coatings were investigated. ZrC coating grew in an island-layer mode. The formation of coating was dominated by the nucleation of ZrC in the initial 20 minutes, and the rapid nucleation generated a fine-grained structure of ZrC coating. When the deposition time was over 30 min, the growth of coating was dominated by that of crystals, giving a column-arranged structure. Energy dispersive X-ray spectroscopy showed that the molar ratio of carbon to zirconium was near 1:1 in ZrC coating, and X-ray photoelectron spectroscopy showed that ZrC was the main phase in coatings, accompanied by about 2.5mol% ZrO₂ minor phase.     

Variable sorting based on fault tree structure adjustment for multi-valued decision diagrams

The dynamic fault tree does not have the ability of fault calculation when analyzing the reliability of the system, so it needs to be modeled and analyzed by means of multi-valued decision diagrams and so on. The dynamic fault tree is translated into a multi-valued decision diagram according to the ordering of variables of basic events which affects the size of the generated multi-valued decision diagram and the cost of traversal to get cut sequences. An adjustment method of the dynamic fault tree structure is proposed based on the importance degree of repeated events, dynamic gates and the locations of events of the dynamic fault tree. By taking the fact that the basic events at the same level are equally important into account, an improved dynamic variable ordering method and ordering generation algorithm for the multi-valued decision diagram are presented in this paper. The result analysis of an example shows that the improved dynamic variable ordering method can reduce the size of the multi-valued decision diagram and space and time complexity of the reliability calculation compared to the similar methods.     

Method Based on Time Randomization to Resist Fault Sensitivity Analysis

A fault sensitivity analysis (FSA)-resistance model based on time randomization is proposed. The randomization unit is composed of two parts, namely the configurable register array (R-A) and the decoder (chiefly random number generator, RNG). In this way, registers chosen can be either valid or invalid depending on the configuration information generated by the decoder. Thus, the fault sensitivity information can be confusing. Meanwhile, based on this model, a defensive scheme is designed to resist both fault sensitivity analysis (FSA) and differential power analysis (DPA). This scheme is verified with our experiments.     

Jitter Tests and Studies for the Azimuth Axis of the TMT Tertiary Mirror System

太阳辐照度绝对辐射计的灵敏度研究与优化

衣小龙^1,2,方伟¹,骆杨¹,夏志伟¹,王玉鹏¹

（1. 中国科学院 长春光学精密机械与物理研究所,长春 130033;

2. 中国科学院大学,北京100049）

创新点说明：

1）通过理论分析以及实验测量的手段,研究灵敏度非线性误差对太阳辐照度绝对辐射计测量精度的影响;

2）提出了太阳辐照度绝对辐射计的测量新方法,通过实时修正灵敏度补偿了灵敏度的非线性误差,从而提高测量精度。

研究目的：

目前太阳辐照度绝对辐射计的定标精度随光功率的降低而下降,本文主要研究目的是提高太阳辐照度绝对辐射计的测量精度,从而提高定标精度。

研究方法：

通过理论分析以及实验测量的路线研究灵敏度非线性,通过修正灵敏度误差提高太阳辐照度绝对辐射计的测量精度。基于两点插值原理提出优化的测量方法。在各个辐射功率下测量实时修正灵敏度,得到灵敏度非线性的相对系统误差为2.2%,分析灵敏度非线性的影响。同时使用新方法以及传统方法测量辐射功率。

结果：

比对实验结果说明新方法将测量精度提高到0.1%,通过实时修正补偿了灵敏度非线性。

结论：

1）新方法可以显著提高地面比对实验的定标精度;

2）灵敏度非线性研究为优化太阳总辐照度监测仪的在轨定标精度提供了理论和实验依据。

关键词：测量精度;绝对辐射计;辐射定标;太阳辐照度