Terrestrial digital video broadcasting for mobile reception using OFDM

Performance of a system design for digital video broadcasting is examined with emphasis on mobile reception. Orthogonal frequency division multiplexing (OFDM) is used to achieve good bandwidth efficiency and to mitigate the intersymbol interference resulting from the channel delay spread. The resulting equivalent channel including OFDM can be modeled as a flat Rayleigh fading channel plus an interchannel interference (ICI) term due to the channel Doppler spread. This ICI term is analyzed and shown to result in an error floor. Performance improvements due to antenna diversity and trellis-coded modulation (TCM) are given. Finally, multiresolution modulation is discussed as a means of achieving graceful degradation and giving degrees of freedom for further performance improvement.This research was supported by the Multimedia Systems R & D Laboratory, Hitachi, Ltd.     

Sequences present in the cytoplasmic domain of CD4 are necessary and sufficient to confer sensitivity to the human immunodeficiency virus type 1 Vpu protein

CD4 is an integral membrane glycoprotein which functions as the human immunodeficiency virus receptor for infection of human host cells. We have recently demonstrated that Vpu, a human immunodeficiency virus type 1-encoded integral membrane phosphoprotein, induces rapid degradation of CD4 in the endoplasmic reticulum. Using an in vitro model system, we demonstrated that Vpu targets specific sequences in the cytoplasmic domain of CD4 to promote its degradation. In this report, we have further delineated regions within CD4 which are required for susceptibility to Vpu. Transfer of the CD4 cytoplasmic region into a heterologous protein, CD8, rendered the chimeric protein sensitive to Vpu-dependent degradation. In contrast, substitution of the CD8 transmembrane domain with the analogous region from CD4 did not confer sensitivity to Vpu. Finally, mutant forms of the CD4 protein containing the extracellular region alone or the extracellular and transmembrane regions linked to a heterologous cytoplasmic domain were not targeted by Vpu. Thus, sequences present in the cytoplasmic domain of CD4 are necessary and sufficient to confer sensitivity to Vpu.     

Comparison of magnetic resonance volume flow rates, angiography, and carotid Dopplers. Preliminary results

BACKGROUND AND PURPOSE: We compared the results of conventional angiography, carotid Doppler, and magnetic resonance angiography volume flow rates to determine the clinical utility of volume flow rate assessment of blood flow to the anterior circulation in patients with carotid occlusive disease. METHODS: From 11 symptomatic patients, a total of 22 extracranial carotid arteries were studied with all three techniques. The studies were independently read, and regression analysis was used to compare the measurements. RESULTS: Carotid Doppler measurements of the distal extracranial carotid arteries were proportional to the inverse of the extracranial carotid volume flow rate (r = .53, R2 = 29%, P < .01), volume flow rates were proportional to the inverse of measured percent stenosis on angiography (r = .84, R2 = 71%, P < .01), and Dopplers were proportional to angiography (r = .94, R2 = 90%, P < .01). Symptomatic Doppler systolic velocity was significantly higher (P < .002), symptomatic measured stenosis was significantly higher (P < .002), and symptomatic volume flow rate was significantly lower (P < .01) than their respective asymptomatic-side values. These preliminary observations, however, may well change once a large data set, especially one in which more patients with high-grade carotid stenosis are included, is studied. CONCLUSIONS: Assessment of carotid volume flow rates by magnetic resonance angiography quantifies flow reduction secondary to atherosclerotic occlusive disease. The easily obtained flow data add both documentation of arterial flow characteristics related to internal carotid stenosis and information regarding the adequacy of collateral pathways.     

Laboratory evaluation of the XR-Bond Dentin/Enamel Bonding System

The shear bond strengths of the XR-Bonding System used in conjunction with Herculite composite, to the dentine of forty extracted human permanent first and second molars were determined after the test specimens were stored in physiological saline at 37 degrees C for 48 hours, one week, two weeks and four weeks, respectively. A shear load was applied to the base of the bonded composite cylinders with a knife-edged rod at a crosshead speed of 0.5 mm/minute. The shear bond strengths were expressed in megapascals (MPa). The quantitative microleakage of Class V preparations in dentine (cementum) in forty-eight extracted human maxillary permanent canines restored with the same dentinal bonding system and after storage in physiological saline at 37 degrees C for the same time intervals as for the shear bond strength tests, was determined. On the final day of each time interval the teeth were thermocycled X 500 in a 2 per cent methylene blue solution between 8 degrees C and 50 degrees C with a dwell time of 15 seconds. Microleakage was determined by a spectrophotometric dye-recovery method and expressed in microgram dye/restoration. There was a significant trend for the shear bond strengths to increase with duration of storage (p = 0.01) but the quantitative microleakage was not significantly different (p = 0.75).     

Block Copolymer Surface Reconstuction: A Reversible Route to Nanoporous Films

Thin films of block copolymers have been used as templates and scaffolds for the fabrication of arrays of nanostructured materials. In general, a chemical modification of the film or the removal of one of the components by photodegradative methods is required to produce a nanoporous film that serves as a template or scaffold. Here, however, the preferential interaction of one of the components with a solvent is shown to produce a reconstruction of the block copolymer film that, upon drying, leads to the generation of a nanoporous template. The area density of the pores is identical to that of the original copolymer thin film. Since no chemical reactions occurr, the process is fully reversible. Upon heating the copolymer film above its glass‐transition temperature, mobility is imparted to the copolymer and the original copolymer film with oriented domains is recovered. The film reconstruction significantly simplifies the generation of nanoporous templates.     

Comparison of capillary gas chromatographic method and automated spectrophotofluorometric methods for measuring content uniformity of conjugated oestrogens in pharmaceutical preparations

To measure the content uniformity of conjugated cestrogens tablets, the USP XXII monograph specifies a capillary gas chromatographic method. This involves separation of the trimethylsilyl derivatives of the various oestrogens found in a typical conjugated oestrogens tablet using a fused-silica 0V 225 bonded phase column. Hydrogen is used as the carrier gas with FID detection. A more rapid spectrophotofluorometric method of analysis has been developed in which the oestrogens are extracted from the dosage form into water, then transferred into organic solvent as the dicyclohexylamine complex. Fluorescence is developed by heating the solution of the complex in the presence of 70% sulphuric acid. The chemistry and detection are carried out using a segmented-flow analyser.The spectrophotofluorometric method is preferred as a routine control for content uniformity because considerable time is saved during sample preparation and analysis compared to gas chromatography. Coefficients of variation show that both methods produce acceptable results. These results fall well within the USP XXII [1] monograph, limits and also well within the tighter limits imposed by the USP XXII, section 905.