Enzymatic Analysis of Positional Distribution of Fatty Acids in Solid Fat by 1,3-Selective Transesterification with Candida antarctica Lipase B

A protocol for the analysis of the positional distribution of fatty acids (FA) in solid triacylglycerols (TAG) was developed using sn-1(3) selective alcoholysis catalyzed by immobilized Candida antarctica lipase B (CALB). One part by weight of solid fat and ten parts by weight of ethanol (99.5 %) were warmed to liquefy the fat. After adding 0.44 parts by weight of CALB, the mixture was shaken at 50 °C for 10 min then at 30 °C for 2.8 h. The recovery of 2-MAG after the 3-h transesterification reaction was ca. 85 % of the maximum theoretical yield (33 mol%), with the loss of 15 % attributable to the acyl migration from sn-2 to sn-1(3). The recovery was similar to that of the solvent-free alcoholysis of structured lipids, 1,3-dipalmitoyl, 2-oleoyl glycerol and 1,3-dioleoyl, 2-palmitoyl glycerol, conducted at 30 °C for 3 h. In contrast, the acyl migration from sn-1(3) to sn-2 was hardly observed. Because the detected acyl migration was only in the direction of sn-2 to sn-1(3), and not vice versa, it is proposed to determine the FA composition of the sn-2 position of TAG by the gas chromatographic analysis of 2-MAG fraction recovered from the enzymatic reaction mixture, and the FA composition of sn-1(3) position by a mass balance using the FA composition of TAG and of the sn-2 position as inputs. The procedure was successfully applied to palm oil and shea butter, and docosahexaenoic acid (DHA)-rich single cell oil from Aurantiochytrium sp. KH105 for the first time.     

Porcine hemoglobin promotes lipid excretion to feces more strongly than globin protein in rats

In an effort to clarify whether the lipid-lowering effect of hemoglobin is due to globin protein or heme, this study investigated the effects of dietary porcine hemoglobin (PH) and porcine globin (PG) on lipids contents of serum, liver, and feces in rats. Five-week-old male Wistar rats were divided into 3 dietary groups of 7 rats each, with one group receiving a control diet and the other groups receiving diets containing 1.25% (w/w) PH or 1.18% (w/w) PG for 4 weeks. The PH diet decreased triacylglycerol content in serum and cholesterol in serum and liver, whereas the PG diet reduced triacylglycerol content in serum and cholesterol in liver. Fecal lipid excretion in the PH group was significantly higher than in the PG group. Therefore, PH affected lipid excretion to feces due to globin protein as well as heme.     

Pressure-sensitive molecular film for investigation of micro gas flows

For the development of micro- and nano-technology, it has been strongly desired to understand thermo-fluid phenomena inside or around micro- and nano-devices. An optical measurement technique based on the absorption and the emission of photons by molecules is useful for experimental analyses of thermo-fluid phenomena of micro and nanoflows. The pressure-sensitive paint (PSP) technique is a potential diagnostic tool for pressure measurements of micro/nano gas flows because it works as a so-called “molecular sensor”. However, the micro-scale measurement of PSP has been limited by the aggregation of the luminescent molecules and their thick film due to the use of a polymer binder. In our previous work, we adopted the Langmuir–Blodgett (LB) technique to fabricate pressure-sensitive molecular film (PSMF) with ordered molecular assemblies, and investigated properties of PSMF. In this study, a novel approach to enhance the luminescent intensity of PSMF is proposed, and the pressure distribution in a micro-nozzle is successfully measured by using PSMF. Moreover, we compared the pressure distribution measured by PSMF with that numerically analyzed by the direct simulation monte carlo (DSMC) method, showing good agreement with each other.     

A system for synchronizing the nods of a CG character and a human using thermal image processing and a moving-average model

The purpose of this study was to develop a system for communication between a human and a computer generated (CG) character to make him or her more peaceful and cheerful. Nonverbal communication using such things as facial expression, a nod, or a hand gesture is very important for reciprocal communication between humans. In this study, an image registered by infrared rays which describes the thermal distribution of the face and neck has been used to develop a system for communication between a human and a CG character. The CG character can synchronize its nod with a person’s nod by predicting his or her nod angle. The measured feature parameter is input to a fuzzy algorithm system to obtain the nod angle of a person in front of an infrared camera, and then a moving-average model is used to predict the nod angle of the person. The average error of the nod angle obtained by the system has been estimated as about 5°. The CG character nods its head, not only when the human nods his or her head, but also when the human shakes his or her head to the left or right.     

Dynamical Transition of 4He Crystallization in a Very High Porosity Aerogel

Crystallization of ⁴He in aerogels of 90 and 96% porosities shows a dynamical phase transition at around 600 mK due to the competition between thermal fluctuation and disorder: crystals grow via creep at high temperatures and via avalanche at low temperatures. In a very high porosity 99.5% aerogel, however, the transition had not been observed in our previous publication (Nomura et al. in Phys. Rev. Lett. 101:175703, 2008). We improved the spatial resolution of the video image and found that the 99.5% aerogel did have the transition at around 200 mK, which is much lower than those of the lower porosities. The avalanche size is significantly smaller in the 99.5% aerogel. The reduction in the transition temperature and avalanche size may be the consequence of weaker disorder for the crystallization in the very high porosity aerogel.     

Out‐of‐Plane Strain Induced in a Moiré Superstructure of Monolayer MoS2 and MoSe2 on Au(111)

Making contact of transition metal dichalcogenides (TMDCs) with a metal surface is essential for fabricating and designing electronic devices and catalytic systems. It also generates strain in the TMDCs that plays significant role in both electronic and phonon structures. Therefore, detailed understanding of mechanism of the strain generation is important to fully comprehend the modulation effect for the electronic and phonon properties. Here, MoS₂ and MoSe₂ monolayers are grown on Au surface by chemical vapor deposition and it is demonstrated that the contact with a crystalline Au(111) surface gives rise to only out‐of‐plane strain in both MoS₂ and MoSe₂ layers, whereas no strain generation is observed on polycrystalline Au or SiO₂/Si surfaces. Scanning tunneling microscopy analysis provides information regarding consequent specific adsorption sites between lower S (Se) atoms in the S? Mo? S (Se? Mo? Se) structure and Au atoms via unique moiré superstructure formation for MoS₂ and MoSe₂ layers on Au(111). This observation indicates that the specific adsorption sites give rise to out‐of‐plane strain in the TMDC layers. Furthermore, it also leads to effective modulation of the electronic structure of the MoS₂ or MoSe₂ layer.     

Eutectic Morphology of Al-7Si-0.3Mg Alloys with Scandium Additions

The mechanisms of Al-Si eutectic refinement due to scandium (Sc) additions have been studied in an Al-7Si-0.3Mg foundry alloy. The evolution of eutectic microstructure is studied by thermal analysis and interrupted solidification, and the distribution of Sc is studied by synchrotron micro-XRF mapping. Sc is shown to cause significant refinement of the eutectic silicon. The results show that Sc additions strongly suppress the nucleation of eutectic silicon due to the formation of ScP instead of AlP. Sc additions change the macroscopic eutectic growth mode to the propagation of a defined eutectic front from the mold walls opposite to the heat flux direction similar to past work with Na, Ca, and Y additions. It is found that Sc segregates to the eutectic aluminum and AlSi₂Sc₂ phases and not to eutectic silicon, suggesting that impurity-induced twinning does not operate. The results suggest that Sc refinement is mostly caused by the significantly reduced silicon nucleation frequency and the resulting increase in mean interface growth rate.     

A tree structure of automata for selective image scanning and its implementation

We propose a novel signal scanning method using a tree structure of automata. This method has a kind of image compression capability, about 1/6–1/20 for samples images, by skipping the scan of non-active elements with a selectively activated signal path only to active elements. We also demonstrate the effect of data compression for some examples and an implementation of tree structure on a VLSI chip.     

Site-directed mutagenesis study of the antibody 2D7 which catalyzes a reaction for insertion of Cu2+ into mesoporphyrin

Monoclonal antibody 2D7 generated against a transition-state analog N-methyl mesoporphyrin catalyzes a reaction for insertion of a cupric ion into mesoporphyrin. To investigate amino acid residues responsible for the catalytic activity, site-directed mutagenesis of the amino acid residues in the third complementarity determining region of the heavy chain (CDRH3) was performed on the antigen-binding fragment (Fab) of the antibody. Recombinant Fab mutants, in which Arg95 is replaced with Ala (R95A), Asp96 with Asn (D96N) and Met97 with Gly (M97G), were examined in terms of the catalytic efficiency of the reaction (k/K(S)) and the dissociation constant for N-methyl mesoporphyrin binding (K(d)) and these values were compared with those of the wild type. The k/K(S) values of the R95A and D96N mutants were 0.96% and 1.0% of that of the wild type, respectively, whereas the M97G mutant had no detectable catalytic activity. The K(d) values of the R95A and D96N mutants were 165 and 69 times that of the wild type, respectively, while that of the M97G mutant was similar to that of the wild type. The relationship between the k/K(S) and 1/K(d) values in the wild type and the R95A and D96N mutants suggests that Arg95 and Asp96 are responsible for stabilizing the transition-state in the catalytic reaction. The results of the M97G mutant allow us to propose that Met97 plays an important role in the catalytic activity probably due to a subtle and specific conformation of the antibody.