Evaluation of advanced fuzzy logic PSS on analog network simulatorand actual installation on hydro generators

This paper presents the experimental evaluation of an advanced fuzzy logic PSS on the analog network simulator at the Research Laboratory of Kyushu Electric Power Co., Inc. The proposed power system stabilizer (PSS) is set up by using a personal computer with A/D and D/A conversion interfaces. The personal computer based PSS was set on the analog network simulator to evaluate the effectiveness of the advanced fuzzy logic control scheme, and to provide sufficient data for the actual installation of the proposed PSS on hydro-units in the Kyushu Electric Power System. This paper also describes the actual installation of the proposed PSS on hydro-units in the Kyushu Electric Power System for the long term evaluation of the proposed PSS using its prototypes     

Growth structure investigation of MgF2 and NdF3 films grown by molecular beam deposition on CaF2(111) substrates

The growth structure of MgF₂ and NdF₃ films grown on polished CaF₂(111) substrates deposited by molecular beam deposition has been investigated using transmission electron microscopy (TEM) of microfractographical and surface replications as well as cross-sectional TEM, atomic force microscopy, packing density, and absorption measurements. It has been shown that by taking advantage of ultrahigh vacuum environments and a special stratification property of MgF₂ and NdF₃ films, the preparation of nanocrystalline films of high packing density and low optical absorption is possible at a substrate temperature of 425 K.     

Finite twist and extension of a cylindrical elastic membrane

Summary We consider a circular cylindrical membrane subjected to longitudinal extension and twist. The associated equilibrium deformation is considered to be axisymmetric and the analysis is based on a direct two-dimensional formulation. Wrinkling of the membrane is taken into account in an approximate way by introducing arelaxed strain energy function derived from the neo-Hookean strain energy for isotropic elastic solids. Analytical formulae for wrinkled parts of the membrane are used to corroborate the results of a numerical treatment of the full boundary value problem.Dedicated to the memory of A. C. Pipkin     

Determination of the length of deformation waves in the high-rate deformation of metals

A simple method has been devised for determining the length of a deformation wave in a solid. The method is based on the phenomenon of metalcutting and makes use of the interference of coherent waves. A hypothesis regarding the wave propagation of mechanical and thermal energy is proven experimentally, and it is established that the frequency of these oscillations increases with an increase in deformation rate.Translated from Problemy Prochnosti, No. 3, pp. 88–95, March, 1996.     

Measurement of the tunnel rate in SIS' tunnel junctions as function of bias voltage

Cryogenic detectors with superconducting tunnel junctions can provide an energy resolution improved by at least one order of magnitude compared with standard semiconductor detectors. While the detection principle was already demonstrated many years ago, the past years were dedicated to the transition from the laboratory sample to practical detectors. Our most favored detector design gives rise to tunnel junctions with electrodes of unequal energy gaps. In such hetero tunnel junctions bias conditions can be established which cause a negative signal current. We report the experimental verification of this effect, and we discuss the yield of charge signal of cryogenic detectors based upon superconducting tunnel junctions.     

Comparative Rheomechanical and Adhesive Properties of Two Hydrocolloid Dressings: Dependence on the Degree of Hydration

Hydration is believed to modify the mechanical properties (resistance to stress) and the rheological (viscoelastic) properties of hydrocolloid dressings. Rheomechanical properties in turn influence adhesional properties. In this work the relationships between the degree of hydration and the rheomechanical and the adhesive properties of two different commercial dressings (regular and nondispersive) were investigated. The two dressings showed different hydration characteristics. The regular dressing takes up water rapidly and tends to reach saturation after 12 hr. As the dressing swells and loses its integrity there is an accompanying reduction of both rheomechanical and adhesive properties. The nondispersive dressing exhibits a linear water uptake profile over extended periods of hydration up to 4 days. It does not swell and its rheomechanical and adhesive properties remain unchanged after hydration, The comparative evaluation of the results obtained with the various methods points to the relevance of mechanical and viscoelastic properties to the functionality assessment of dressings.     

Author index,vol. 70 (1994/1995)

Author index, vol. 70 (1994/1995)     

Cyclooxygenase and lipoxygenase arachidonate metabolites synthesized by mouse peritoneal macrophages: in vitro effect of N-phenyllinoleamide from toxic oil samples

N-phenyllinoleamide (NPLA) has been detected as extraneous compound in adulterated cooking oils associated with a unique epidemic disease known as the Toxic Oil Syndrome (TOS). In this communication we report on the action of NPLA on the endogenous cyclooxygenase and lipoxygenase arachidonate metabolism. Results show that mouse peritoneal macrophages (MPM) exposed to 1 mM NPLA for 2 h undergo significant increases of 6-keto prostaglandin F1a, prostaglandin E2, leukotriene B4, 12- and 15-hydroxyeicosatetraenoic acids. MPM prelabelled with 3H-AA showed an enhanced release when exposed to NPLA. Thus, it is concluded that NPLA potentiates AA release from cell membrane phospholipids and the subsequent cyclooxygenase and lipoxygenase oxidative metabolism of this precursor to various eicosanoids. This is in agreement with the implication of peroxidative process mediated by fatty acids anilides in TOS.