Comparison of two models for a high temperature reactor coupled to a gas turbine

This paper presents two independent dynamic models of a nuclear gas turbine power plant. Both the high temperature nuclear reactor (HTR) and its energy conversion system (ECS) based on a direct Brayton cycle have been modelled. One model utilises RELAP5 for the ECS, the other Aspen Custom Modeler (ACM). The reactor model used in both models is a point kinetic model derived from a detailed reactor model. The ECS model is described and compared componentwise, with an emphasis on the turbomachinery. The total plant models are compared with each other by calculating two representative transients: one load rejection transient and one transient with the system at part load.     

A neural network compensator for uncertainties of roboticsmanipulators

A neural network controller for trajectory control of robotic manipulators that is used not to internalize the inverse dynamic model of the controlled object but to compensate only the uncertainties of the robotic manipulator is presented. Its performance is compared with that of the conventional adaptive scheme. The results show the ability of the neural network controller to adapt to unstructured effects. A learning method for the neural network compensator with true teaching signals is shown. The tracking error of the robotic manipulator was greatly reduced when this controller was used     

A least mean square error synthesis with pattern constraints atmultiple frequencies

The pattern synthesis techinque described allows the power pattern to be optimized in a very useful sense over the desired operating band of the antenna array. This is an improvement over previous techniques involving constraints on such artificial parameters as source norm and superdirectivity ratio, which do not, in fact, ensure a useful pattern bandwidth. The procedure described provides minimum mean square error over an arbitrary number of discrete frequencies     

Surgical treatment of aneurysms of the left ventricle. Immediate and long-term results. Apropos of a consecutive series of 121 cases

From 1978 to 1992, 121 cases of postinfarction left ventricular aneurysm (99 males, 22 females, mean age 60 years) were operated on. The authors insist on a high rate of clinical arhythmogenicity (31.4%) and associated mechanical complications (21%). 76% of patients were in functional NYHA class III or IV. Resection was performed in 90% of patients, plication in 10%. 58% underwent coronary artery bypass grafting (1.7 graft/patient), 16% encircling ventriculotomy, 8% mitral valve replacement and 13% closure of ventricular septal defect. Operative mortality was 14.9% (10% when other mechanical complications where excluded). 5-year survival is 67.9%. Late cardiac deaths are as follow: left ventricular failure (1.8% A/P), Sudden death (1.4% A/P), Myocardial infarction (0.6% A/P). 82% of survivals are in functional NYHA class I or II. Only functional class NYHA III or IV is predictive of late death. We conclude that postinfarction left ventricular aneurysm remains a high risk complication especially when associated with other mechanical complications. When arhythmogenicity is present we suggest rhythmologic surgery and in all cases, complete revascularization.     

Reply to Comment on “Ewald summation technique for one-dimensional charge distributions”

We explain why the methods in Langridge, Hart and Crampin [Comput. Phys. Commun. 134 (2001) 78] suffice for the evaluation of the lattice sums entering the Madelung matrix describing multipole interactions in systems with one-dimensional translational periodicity.     

Hydrogen absorption by Pd-coated ZrNi prepared by using Barrel-Sputtering System

To improve the durability of hydrogen storage materials against surface poisoning by impurity gases, effectiveness of Pd-coating layer prepared by using a Barrel-Sputtering System was examined for ZrNi powder. The effectiveness of Pd-coating was evaluated by activation temperature, at which Pd/ZrNi poisoned by air could be activated to absorb hydrogen. Characterization of Pd-coated ZrNi (denoted as Pd/ZrNi) by scanning electron microscopy, electron probe microanalysis and X-ray diffraction showed that a uniform Pd-coating layer was formed with the barrel-sputtering system. It was found that the poisoned Pd/ZrNi sample could be activated even at 423 K to absorb hydrogen at room temperature. This exhibits remarkable contrast to bare ZrNi, which could be only activated appreciably above 1073 K. It is concluded that the Pd-coating by barrel sputtering is quite effective to avoid the effect of surface poisoning of powdery hydrogen storage materials. However, the activation at excessively high temperature resulted in the loss of high activity to absorb hydrogen. It was concluded that this phenomenon was associated with reactions between Pd and ZrNi to form PdZr and other byproducts.     

Circular core polarization-maintaining optical fibers withelliptical stress-induced cladding

The reproducible technology for producing high-birefringence fibers with stress-induced elliptical cladding and circular core is described. The authors have obtained fibers that have a birefringence of about (1-3) 10^-4, a mode coupling parameter of about (2-7) 10 ^-5 m^-1, and loss of less than 0.5 dB/km at 1.6 μm. The authors have found effects restricting the capability of test fibers to maintain the state of linear polarization     

Formula creatinine clearance as a substitute for 24-hour creatine clearance in children with kidney transplantation

A 10-year-old German shepherd dog presented with a periodontal 10 mm interproximal defect between the left mandibular fourth premolar and first molar teeth. Bone graft removed from the caudoventral portion of the ipsilateral hemimandible was placed in the defect as a component of the periodontal treatment plan. The use of bone graft likely contributed to periodontal pocket reduction.