The onset of Taylor-Görtler vortices in impulsively decelerating swirl flow

The onset of hydrodynamical instability induced by impulsive spin-down to rest in a cylinder containing a Newtonian fluid is analyzed by using propagation theory. It is well-known that the primary transient swirl flow is laminar, but with initial high velocities secondary motion sets in at a certain time. The dimensionless critical time Τ_c to mark the onset of instability is presented here as a function of the Reynolds number Re. Available experimental data indicate that for large Re deviation of the velocity profiles from their momentum diffusion occurs starting from a certain time Τ≈4Τ_c. This means that secondary motion is detected at this characteristic time. It seems evident that during Τ_c⪯Τ⪯4Τ_c, secondary motion is relatively very weak and the primary diffusive momentum transfer is dominant.     

Highly ion-conductive solid polymer electrolytes based on polyethylene non-woven matrix

Highly ion-conductive solid polymer electrolyte (SPE) based on polyethylene (PE) non-woven matrix is prepared by filling poly(ethylene glycol) (PEG)-based crosslinked electrolyte inside the pores of the non-woven matrix. The PE non-woven matrix not only shows good mechanical strength for SPE to be a free-standing film, but also has very porous structure for high ion conductivity. The ion conductivity of SPE based on PE non-woven matrix can be enhanced by adding sufficient non-volatile plasticizer such as poly(ethylene glycol) dimethyl ether (PEGDME) into ion conduction phase without sacrificing mechanical strength. SPE with 20 wt.% crosslinking agent and 80 wt.% non-volatile plasticizer shows 3.1 × 10⁻⁴ S cm⁻¹ at room temperature (20 °C), to our knowledge, which is the highest level for SPEs. It is also electrochemically stable up to 5.2 V and has high transference number about 0.52 due to the introduction of anion receptor as an additive. The interfacial resistance between Li electrode and SPE is low enough to perform charge/discharge test of unit cell consisting of LiCoO₂/SPE/Li at room temperature. The discharge capacity of the unit cell shows 87% of theoretical value with 86% Coulombic efficiency.     

The optical properties of hot-pressed magnesium fluoride and single-crystal magnesium fluoride in the 0.1 to 9.0 μm range

A polycrystalline high-density magnesium fluoride, fabricated into plates or shapes by hot-pressing, exhibits high in-line transmittance from 2.5 to 6.0 m, and single-crystal magnesium fluoride extends from 0.1 to 6.0 m. The ultimate and practical transmittance of hot-pressed magnesium fluoride using intrinsic and extrinsic reflectance, absorptance and scattering mechanisms, are investigated. The intrinsic scattering mechanism due to the polycrystalline structure is basically responsible for the tremendous difference in transmittance in the short wavelength region of the spectrum. The in-line transmittance of polycrystalline and singlecrystal MgF₂ is discussed in terms of sample thickness.     

A Performance Evaluation of Classic Convolutional Neural Networks for 2D and 3D Palmprint and Palm Vein Recognition

Palmprint recognition and palm vein recognition are two emerging biometrics technologies. In the past two decades, many traditional methods have been proposed for palmprint recognition and palm vein recognition, and have achieved impressive results. However, the research on deep learning-based palmprint recognition and palm vein recognition is still very preliminary. In this paper, in order to investigate the problem of deep learning based 2D and 3D palmprint recognition and palm vein recognition in-depth, we conduct performance evaluation of seventeen representative and classic convolutional neural networks (CNNs) on one 3D palmprint database, five 2D palmprint databases and two palm vein databases. A lot of experiments have been carried out in the conditions of different network structures, different learning rates, and different numbers of network layers. We have also conducted experiments on both separate data mode and mixed data mode. Experimental results show that these classic CNNs can achieve promising recognition results, and the recognition performance of recently proposed CNNs is better. Particularly, among classic CNNs, one of the recently proposed classic CNNs, i.e., EfficientNet achieves the best recognition accuracy. However, the recognition performance of classic CNNs is still slightly worse than that of some traditional recognition methods.

     

Protein interaction networks: centrality,modularity, dynamics,and applications

In the post-genomic era, proteomics has achieved significant theoretical and practical advances with the development of high-throughput technologies. Especially the rapid accumulation of protein-protein interactions (PPIs) provides a foundation for constructing protein interaction networks (PINs), which can furnish a new perspective for understanding cellular organizations, processes, and functions at network level. In this paper, we present a comprehensive survey on three main characteristics of PINs: centrality, modularity, and dynamics. 1) Different centrality measures, which are used to calculate the importance of proteins, are summarized based on the structural characteristics of PINs or on the basis of its integrated biological information; 2) Different modularity definitions and various clustering algorithms for predicting protein complexes or identifying functional modules are introduced; 3) The dynamics of proteins, PPIs and sub-networks are discussed, respectively. Finally, the main applications of PINs in the complex diseases are reviewed, and the challenges and future research directions are also discussed.     

高分2号图像业务化大气校正查找表的设计与实现

为实现高分2号图像(GF2)业务化大气校正,利用矢量6S模型(6SV)将辐射传输散射与吸收进行分离计算,其中散射部分采用涵盖各种大气模式、气溶胶类型、成像几何等条件下的大气校正查找表(look-up tables,LUTs)表示,大气吸收部分采用6SV拟合计算的6种大气模式下大气透过率的经验公式表示,这种处理有效简化了查找表大小.在内存4 GB、主频3.10 GHz条件下,通过比较基于本查找表方法和基于FLAASH大气校正软件对北京地区一景GF2数据处理.结果表明:以6SV模型直接大气校正法结果作为真值,两者的绝对误差分别为0.8%和2.6%,处理时间分别为77 s和240 s,该大气校正查找表在处理精度和效率更加适合业务化大气校正.     

层间接触状态和横向力大小对车辙贡献率的影响

车辙贡献率是反映沥青路面各结构层车辙病害程度的一个主要参数,可用于指导沥青路面的设计和施工.利用三维有限元计算软件建立三维有限元模型用于理论分析,将有限元计算结果与理论解进行对比,验证了该三维有限元模型的可靠性.采用实测的轮胎接地压力,考虑不同层间接触状态和横向力大小,结合有限元计算的数据,分析了沥青路面结构层的车辙贡献率.结果表明:在层间完全连续状态下,横向力大小的选取不能简单地选取最大垂直轮胎接地压力的一定比例,而是要根据所研究的具体情况具体分析.在对沥青路面车辙贡献率的研究中,可以忽略层间接触状态,即假定层间完全连续.