管板现场堵漏焊接中的技术要点

在对列管进行堵管时 ,如果堵头形状和加工尺寸不合理 ,焊接工艺不当 ,在焊缝处极易出现气孔、裂纹等现象 ,在仰焊时还易出现夹渣现象 ,造成新的泄漏。因此 ,管板现场堵漏时要注意以下几点 :1 )焊接材料的选择由于现场管板堵漏时列管内介质很难清除干净 ,特别是列管内存在少量水     

成组技术和造船模式的发展

本文论述了ＧＴ是造船模式进步的思想基础，并阐明了ＧＴ在ＳＣＩＭＳ中的作用．     

Rendering of Surface and Volume Details in Volume Data*

Aiming at the detail rendering in volume data, a new volume illumination model, called Composed Scattering Model (CSM), is presented. In order to enhance different details in volume data, scattering intensity is decomposed into volume scattering intensity and surface scattering intensity with different weight functions. According to the Gauss probability distribution of gray and gradient of data, we propose an accurate method to detect the materials in a voxel, called composed segmentation. In addition, we discuss the principle of constructing these weight functions based on the operators defined in composed segmentation. CSM can generate images containing more details than most popular volume rendering models. This model has been applied to the direct volume rendering of 3D data sets obtained by CT and MRI. The resultant images show not only rich details but also clear boundary surfaces. CSM is demonstrated as an accurate volume rendering model suited for detail enhancement in volume data sets.     

基于拓扑法的多关节机械手无碰路径规划

本文提出了一种基于拓扑法的多关节机械手无碰路径规划方法,文中重点讨论了三关节机械手路径规划时如何划分状态空间、判别各连通块之间的连通性以及路径搜索等问题,最后我们给出了一个实验结果以示该方法的有效性。     

0.5级电子式电能表的设计与实现

本文论述了一种普及型电子式电能表的设计原理和实现方法，具体讨论了时分割乘法器和电流互感器的组成和误差分析，最后给出测试结果。     

镀Cu碳毡／环氧树脂复合的研制

研究了镀Ｃｕ碳毡／环氧树脂（ＣｕＣＦ／ＥＰ）复合材料的制备，并探讨了镀Ｃｕ量对碳毡电阻率，复合材料电阻率及其电磁屏蔽效率的影响规律，经合理工艺制得的镀Ｃｕ碳毡（４００ｍｇ．ｇ＾－１Ｃｕ－ＣＦ）含量为３００ｍｇ．ｇ＾－１ＣｕＣＦ／ＥＰ复合材料，其电磁屏蔽效率可在２０＝－１０００ＭＨＺ范围内达到６０ｄＢ。     

EFFECT OF HYDROGEN ON THE MICROSTRUCTURE OF SUPER-α2 ALLOY WITH β SOLUTION AND AGEING TREATMENT

借助透射电镜和Ｘ射线衍射仪探讨了氢对Ｓｕｐｅｒ－α２合金β固溶后时效组织的影响，结果表明，氢使时效组织显著细化，使析出相呈细小板条状规则排布，此外，氢还促进Ｂ２相转变为Ｏ相。     

Sensitivity analysis of free torsional vibration frequencies of thin-walled i-beam resting on elastic foundation

The sensitivity analysis of natural frequencies of torsional vibration of thin-walled I-beams resting on a Winkler-type elastic foundation and subjected to axial static loads is discussed. The first-order variation of the frequencies due to the design variable variations is derived. The cross- ection dimensions, the beam material constants and the foundation stiffness are assumed to be the design variables. The considerations are based on the theory of thin-walled beams with nondeformable cross-section. The underintegral sensitivity coefficients of the flange width and the foundation stiffness variations for a simply supported I-beam are determined. An accuracy of approximation of the natural frequencies changes due to the design variable change, by means of their first-order variations, is also investigated.     

强化管理机制推进机械制造企业快速发展

随着国有企业改革的不断深化,市场竞争愈加激烈,针对机械行业的现状,从3个方面探讨了强化管理机制,推进机械制造企业可持续快速发展的途径.