IS-2000规范在Walsh Code定义上的局限性

本文针对IS-2000规范关于W alsh Code的定义,发现IS-2000规范有关W alshCode的定义不合理,在前向RC 3下限制了最大数据用户数和最高数据速率;如按本文修改规范关于W alsh Code的定义,不但可以在前向RC 3下提高最大数据用户数,同时在理论上可以将最高数据速率提高一倍。     

The Application of the Theory of the Price Elasticity of Demand to the EMS Management

1　Introduction　ExpressMailService (EMS )wasopenedupbyChinaPostintheearly 80stomeettheneedsofeco nomicdevelopment.It sthemostcompetitiveoneofthepostservices.There recivilaviation ,Chinarail wayandotherprivateexpressdeliverycompaniesdomesticallyandUPS ,TNT ,DHLandTEDEXcompetingwithEMSintheinternationalmarket.OneofthemostpowerfulcompeteweaponofthesecompaniesisthelowerpricethanEMS[1 ] .BecauseofthefiercecompetitionEMSdeclinedfromthemo nopolistindomesticandinternationalmarketoftheear…     

开关电源监控接口电路及故障修理

介绍了常用的开关电源监控RS232接口电路的工作原理，对监控单元上的RS232←→TTL电平转换电路进行了论述，并对此类接口电路的故障进行了分析，对修复此类故障保证开关电源数据的实时上报和通信设备的安全运行具有相当重要的意义。     

正确选择气顶油藏高效开发模式

通过对不同类型气顶油藏的油气水分布特征及气顶和边水能量的研究分析，计算水侵量与边水体积及合理的弹性产率。提出适合气顶油藏特点的开发模式是先开采油区后开采气顶，并以唐家河油田港深18—2断块为例，证明采用该模式可以高效开发气顶油藏。图3表1参6     

热作模具钢表面激光堆焊耐磨合金层的研究

本文主要通过在H13钢上用大功率CO_2激光束进行堆焊,阐述了激光堆焊工艺变化对堆焊组织和性能的影响,在本试验条件下,得到了高密度弥散金属化合物组织的激光堆焊层,平均硬度为HV800,与基体呈冶金结合,耐磨性比H13模具钢提高149%。     

微生物烟气脱硫技术及其研究方向

微生物烟气脱硫 ,是用含有脱硫菌的溶液作循环吸收液、以粉煤灰中Fe2 O3被离子化后产生的铁离子作催化剂和反应介质、以脱除烟气中SO2 的一项新技术 .从能源、酸度、温度、需氧类型等方面综合考虑 ,氧化亚铁硫杆菌、氧化硫硫杆菌、氧化亚铁硫螺菌可作为三层滤料生物滤池脱硫的菌种 .而选育适宜性和稳定性更强、使用寿命更长的高效菌和合适的生化反应器 ,是脱硫菌种研究的趋势 .     

小卫星及多星测控的技术发展

本文从小卫星、星座飞速发展以及对测控通信系统新的要求出发，介绍了综合基带、连续波多波束相控阵天线的功能、特点及工作原理，提出了建立新型多功能智能化测控通信站的设想。     

A Neural Network Approach for Signal Detection in Digital Communications

In this paper, we propose a new approach for signal detection in wireless digital communications based on the neural network with transient chaos and time-varying gain (NNTCTG), and give a concrete model of the signal detector after appropriate transformations and mappings. It is well known that the problem of the maximum likelihood signal detection can be described as a complex optimization problem that has so many local optima that conventional Hopfield-type neural networks fail to solve. By refraining from the serious local optima problem of Hopfield-type neural networks, the NNTCTG makes use of the time-varying parameters of the recurrent neural network to control the evolving behavior of the network so that the network undergoes the transition from chaotic behavior to gradient convergence. It has richer and more flexible dynamics rather than conventional neural networks only with point attractors, so that it can be expected to have much ability to search for globally optimal or near-optimal solutions. After going through a transiently inverse-bifurcation process, the NNTCTG can approach the global optimum or the neighborhood of global optimum of our problem. Simulation experiments have been performed to show the effectiveness and validation of the proposed neural network based method for the signal detection in digital communications.     

LDD方法在提高电路工作电压中的应用研究

研究了利用轻掺杂漏结构来制作高电源电压器件的工艺方法。分析了ＬＤＤ结构参数对器件击穿特性的影响，并结合实验结果对Ｎ＾－区的注入剂量，长度及引入的串联电阻进行了优化设计。     

一种高分辨力柔性触觉传感器

本文描述了一种基于全内反射原理，用透明橡胶材料作为波导板的柔性触觉传感器。该传感器除具有一般刚性波导板触觉传感器的高分辨力等特点外，还具有柔性好，力灵敏阈值低，不怕碰撞等特点，该传感器特别适合装在智能机器人手爪上，为机器人系统高效率地获取物体形状，位置和姿态信息，实现智能抓握物体，操作物体等功能提供了有效的手段。