减少激光粒度仪系数矩阵数目的方法

通过分析激光粒度仪的系数矩阵的计算公式．指出不同焦距下的各个系数矩阵之间存在着简单的比例关系，即可由一个焦距对应的系数矩阵推得另一个焦距的系数矩阵，从而可减少仪器测量所需的系数矩阵数目。这一关系式已由数值计算及对标准颗粒的实测得到证实。     

Skeleton chain coding for Chinese characters

The compression of Chinese characters is very important for Chinese office automation and desktop publishing. In this paper, various methods are used to compress 13,051 Chinese characters losslessly by coding their skeleton points. The skeleton points are composed of isolated points and curves. To trace every point in a curve once and consecutively is a NP problem. Therefore, we use contour path following and revisiting algorithms to trace skeleton curves with chain codes. The remaining isolated skeleton points are encoded by an Elias code. Our coding method has a better compression rate than that of conventional skeleton coding.     

顺丁橡胶生产过程"门尼升值"的原因研究

研究了顺丁橡胶生产过程中门尼升值的原因。结果表明，顺丁橡胶生产后处理的膨胀干燥过程存在门尼升值现象。不同内在质量的顺丁橡胶门尼升值不同，正常条件下门尼升值发生于门尼粘度的测试过程。     

0.64BaTi4O9-0.36BaEu2Ti4O12/BaTi4O9纤维复合陶瓷的相结构研究

利用XRD，XPS和TEM等测试手段对0.64BaTi4O9-0.36BaEu2Ti4O12/BaTi4O9纤维复合陶瓷新材料的相结构进行了研究。研究结果表明：随着BaTi4O6纤维的加入，烧结试样表面O元素的含量提高，材料中Ti^3 离子和Ti^2 离子的含量降低，材料介电性能有所提高。     

Engineering in Action

Improvements in operational performance of the refractory lining of a direct-current electric furnace for cobalt smelting achieved at the Ufaleinikel Joint-Stock Co. in collaboration with the Kombinat Magnezit Joint-Stock Co. are reported.     

重力测井用于注CO2油藏监测的理论分析

在３次采油过程中，注采已为广泛应用，但所面临的问题是如何确定油层中注入流体的波及范围、流体前缘位置及推进速度等。利用地震方法进行注采由于受震资料分辨率的限制，只适用于浅层，而其它测井方法由于探测范围限制，揭示井间注采动态又显不足。重力测井具有探测范围大、受井径变化影响小、重复观测周期短、不受目的层埋深限制等优点。通过正演模拟分析表明，重力测井方法不仅可监测ＣＯ２前缘空间位置的变化，而且可以判定ＣＯ     

多功能DBHTV传输短节的设计与开发

简要介绍了多功能井下超声成像测井仪的总体构思，然后较详细地阐述了其中的一个关键部分-传输短节的设计与开发过程。在短节中应用了单片机系统和FPGA技术，实现了一种包括大数据量井下超声成像测井仪在组合测井新方法，为今后井下超声成像测井仪的发展拓宽了道路。     

天然气制液态烃新工艺

丰富的天然气资源,特别是边远地区分散的中小天然气田和油气共生的油气田的天然气,由于产量达不到管线长输的规模效益,又远离消费市场,很难开发利用.为此,作者在天然气两段催化氧化制合成气和费-托合成研究的基础上,提出了一种流程较短、投资和操作费用较低的天然气合成液态烃新工艺,可将丰富的天然气资源,特别适合将边远地区分散的中小天然气田的天然气转化为无硫、无氮、无芳烃、无重金属污染和便于输运的优质石蜡基液态产品.该产品可经轻度加氢改质得到高品质的柴油掺合组分、润滑油基础油高等附加值产品.该工艺副产的燃料气可用于发电,或作为燃料气使用.     

Energy absorption in splitting square metal tubes

This paper presents an investigation into the energy absorbing behaviour of axially splitting square metal tubes. Tubes 50 mm square with a variable thickness were pushed slowly against rigid pyramid shaped dies, which had various semi-angles. By pre-cutting 5 mm long slits at the four corners, the tube splits along the corners and curls outward with a certain radius at a constant force. In this energy dissipating system, there are three components: tearing energy, plastic deformation energy and frictional energy. Theoretical analysis of the three energy components is presented. Curl radius is also studied in detail. Good agreement between experiments and theory is obtained. The results show that tubes which both split and curl may be used as efficient, long stroke energy absorbing devices.