中短波发射台对变电站二次系统影响分析

为确定中短波无线电发射台工作时是否对变电站二次系统微机继电保护产生电磁干扰影响,对无线电发射台中的直立天线、水平双极天线、菱形天线和对数周期天线的电场强度以及变电站二次系统微机继电保护控制电缆芯线回路两端由此感应的纵向电压和横向电压进行了理论计算,计算结果表明纵向电压和横向电压都不超过DL/Z713—2000规定,说明变电站二次系统不会受到中短波无线电发射台的电磁干扰影响。但建议微机继电保护的控制电缆须采用有钢带铠装的铜屏蔽层电缆,微机保护控制电缆回路加装低通滤波器。     

考虑局部磁滞损耗的复合电机铁损耗计算

磁性齿轮复合电机无论是机械结构还是磁路结构,均比普通永磁同步电机复杂,如何高效准确地计算出铁损耗,对该类电机的设计与优化具有重要的意义。该文设计制造了一台磁性齿轮复合电机样机,并采用有限元时步法进行了详细计算。在此基础上,通过对每一个铁心单元的磁密变化进行分析,计算了该复合电机的铁损耗计算。在计算磁滞损耗时,应用通常用于机械应力应变迟滞计算的雨流计数法,快速统计出构成局部磁滞回环的峰谷点,从而计算出局部磁滞损耗。最后通过两个试验步骤,把电机的铁损耗从空载损耗中分离出来,所得的试验结果验证了所述方法的有效性。     

基于Delphi环境中变频器与上位机实现通信的一种方法

介绍变频器与计算机串行通信的一种实现方法。详细描述变频器与计算机控制系统的硬件构成、软件设计、通信原理和通信协议 ,给出Delphi环境中通信编程的例子     

单、双层不等匝正弦绕组线模的尺寸计算

为了减少谐波磁势,削弱同步附加转矩,提高电机的效率及改善电机性能,三相异步电机的定子线圈广泛采用单、双层不等匝正弦绕组(以下简称正弦绕组)。由于正弦绕组每极每相下各线圈的跨距和导体数均不相等,其绕线模尺寸计算复杂,文章介绍了它的计算方法。     

Effect of ytterbium on the properties of Magnico alloys

Conclusions The addition of 0.3% Yb to an alloy of the Magnico type alloyed with 0.9% Si, 0.5% Nb, and 0.2% Ti increases the maximum magnetic energy to 24 kJ/m³ and reduces the quantity of harmful impurities, which substantially improves the grindability of the alloy.Novocherkassk Scientific-Research Institute of Permanent Magnets. Translated from Metallovedeme i Termicheskaya Obrabotka Metallov, No. 7, pp. 49–50, July, 1976.     

Diffusion saturation of alloy YuNDK24 with carbon

Metal Science and Heat Treatment -     

Resistance to brittle failure of high tempered steels with initial martensitic and bainitic structures

Metal Science and Heat Treatment -     

Tribological Wear-Preventive Coatings

Journal of Machinery Manufacture and Reliability - This article discusses wear-preventive tribological coatings that increase the operational life of artillery, tank, and rifle barrels. Studies...     

Stable Turning of Fluoroplastic Workpieces

Russian Engineering Research - Instability of the system in the machining of fluoroplastic is investigated. The influence of the cutting conditions and preliminary workpiece preparation on the...