高锰钢的泡沫陶瓷过滤净化

采用泡沫陶瓷过滤片对高锰钢进行过滤处理，对其进行金相分析和测试密度，冲击韧性和耐磨性能，并与未过滤的高锰钢进行对比，实验结果表明，在过滤的高锰钢中，金属夹杂物明显减小，密度提高0．53％，冲击韧性39．5％，耐磨性能提高1．04倍，批量生产结果表明，过滤的高锰钢球磨机衬板的使用寿命提高0．6－0．7倍。     

飞剪机定尺控制系统的PID调节

介绍了飞剪机的定尺控制系统,给出了定尺控制系统的结构框图,对控制系统的PID调节器运用试凑法进行了参数整定。     

Structure, magnetization, and magnetostriction of Sm-R-Fe （R = Pr, Nd） thin films

The structure, magnetization, and magnetostriction of Sm0.9Pr0.1Fex and Sm1-xNdxFel.9 thin films have been investigated using X-ray diffraction, vibrating sample magnetometer, and optical cantilever method. It is found that the structure of Sm0.9Pr0.1Fex thin films consists of an Sm-Pr-Fe amorphous phase when x≤2.69 and that of Sm1-xNdxFel.9 thin films consists of an Sm-Nd-Fe amorphous phase. The in-plane magnetization of Sm0.91Pr0.1Fex thin films increases with increase in the Fe content, and low values of the in-plane coercivity occur in the range of 1.62≤ x≤ 2.28. The magnetostriction value of Sm0.91Pr0.1Fex thin films increases with increasing the Fe content when x ≤ 1.94 and decreases when x 〉 1.94. The in-plane magnetostriction of Sm1-xNdxFe1.9 thin films under low magnetic fields has been improved by the substitution of Nd for Sm when x = 0.2.     

Effect of oxygen precipitates in solar grade silicon on minority carrier lifetime and efficiency of solar cells

The effect of oxygen precipitates on minority carrier lifetime and performance of solar cell was studied by means of Fourier Transform Infrared Spectroscopy (FTIR), quasi-steady state photoconductance (QSSPCD), optical microscope, spectrumresponse and solar cell efficiency test. The minority carrier lifetime and performance of solar cell reduced depend on oxygen precipitates. A few of oxygen precipitates have formed after single-step annealing; and they do not impact the efficiency dramatically. Pre-annealing at 650 ℃ for 4 h enhances the oxygen precipitation when it is subjected to middle temperature annealing. The solar cells performance decayed sharply. Especially annealing at 950 ℃ for 3 h, the V os and I sc of cells decrease 12% and 25% respectively. Few oxygen precipitates have formed in silicon after high temperature annealing at about 1050 ℃ whether pre-annealing is used or not, and the performance of cells is notbe affected.     

THEORETICAL CALCULATION OF POINT DEFECTS IN Ni_3Al

Equilibrium equation of point defects in Ll_2 type intermetallic compounds was established tocalculate the relations of the concentration of antisite defects and vacancies and bulk composi-tion in Ni_3Al.The examination of temperature effects on the point defects cleared up the mis.understanding of the properties of the“constitutional point defects”in Ni_3Al.     

高频焊管用464-H14铝复合带材力学性能的研究

结合工业生产研究了高频焊管用464－H14铝合金复合带材的退火工艺和加工工艺对材料力学性能的影响。结果表明：成品材料冷轧前的软化退火温度应选择在既能使材料完全软化而又不发生Si原子扩散的350－400℃之间，冷加工率应控制在20％－40％，这样可使材料获得较好的力学性能，能够满足产品的技术标准和使用要求。     

液压夹轨装置夹不紧原因分析及夹轨装置的改造

本文通过对液压夹轨装置结构和机理分析，指出原设计夹轨装置预留压紧量(Smax-S)不足是导致夹轨装置锁不紧的主要原因，并对相应间隙和零件进行了调整和改造，解决了拖车的锁紧问题。     

脉冲进气旋转喷吹技术的水力模拟

在铝合金熔体净化旋转喷吹技术的基础上 ,采用水力模拟实验研究了脉冲进气方式对气泡大小的影响。实验结果表明 :脉冲进气方式有利于产生射流 ,使气泡变小 ,并增加了气泡与熔体接触的比表面积 ,从而改善了除氢的动力学条件 ,有利于提高除氢效果。     

Y_2O_2S∶Tb纳米晶的能量传递过程的研究

研究了Y2O2S∶Tb纳米晶的发光性质和能量传递过程,根据浓度猝灭曲线分析了纳米Y2O2S中引起5D3和5D4能级浓度猝灭的相互作用类型分别为电偶极-电偶极和交换相互作用。纳米Y2O2S中Tb离子的5D3-7F5跃迁的发光寿命与相同掺杂浓度的体材料相比明显缩短,根据引起浓度猝灭的相互作用类型对发光衰减曲线进行拟合,得到理论和试验一致的结果。