Surface hydrolysis of filaments based on poly(trimethylene terephthalate) spun at high spinning speeds

The surface alkaline hydrolysis of fibers made from poly(trimethylene terephthalate) (PTT) was studied after extruding the polymer at high spinning speeds from 2000 to 6000 m/min and heat setting in the range of temperatures from 100 to 180°C. Fiber weight loss increased with an increasing heat‐setting temperature but it was also dependent on the spinning speed. Some of the partially hydrolyzed fibers had a well‐developed, hydrophilic surface, and pore size in the range of 0.69 to 1.20 μm. The optimum reaction and morphological conditions for increasing porosity in PTT fibers depends on spinning speed and heat‐setting temperature. A temperature of 180°C is the upper limit for heat‐setting PTT filaments but seems to be the most effective for making porous fibers. © 2004 Wiley Periodicals, Inc. J Appl Polym Sci 92: 1724–1730, 2004     

Unsaturated para-linked aromatic LC polyesters: Thermotropic and lyotropic systems

Liquid-crystalline thermosets (LCT) are a new class of materials which combine typical properties of LC polymers with those of conventional thermosets. This article reports on the development of a lyotropic LC thermoset (LLCT) in which the solvent is a vinyl monomer. Such an LLCT is expected to have several advantages compared to conventional unsaturated polyester resins. The synthesis and characterization of a variety of novel substituted para-linked aromatic polyesters and copolyesters containing unsaturated fumaroyl units is presented. The thermal and liquid crystal properties were investigated. It is demonstrated that it is possible to prepare a lyotropic LC solution in styrene. These lyotropic solutions are capable of thermal crosslinking by the addition of a free-radical initiator. © 1995 John Wiley & Sons, Inc.     

Influence of aggregates on chloride diffusion coefficient into mortar

In order to determine the influence of aggregates on chloride ion ingress, mortar specimens were cast with different aggregate size distribution and the same aggregate volume content. One side of the specimen was in contact with alkaline solution containing sodium chloride. The process of chloride ingress is due to diffusion. The effect of the interfacial transition zone (ITZ) around aggregate and of the tortuosity due to aggregates have been taken into account for interpreting the experimental data obtained. These two competing effects have been quantified by using the theory of composite materials. It appears that the diffusion coefficient varies as a function of the ITZ volume content and of the tortuosity.     

Infrared heated μ-blistering,a new fabrication technology for HARMST

Polymeric replication technologies such as injection moulding or hot-embossing have gained wide acceptance in the microtechnological community, microthermoforming of thin polymer foils, also called μ-blistering, still remains relatively unknown. Although the general potentials of the µ-blistering have already been pointed out, little work has been carried out addressing its capability for high aspect ratio microstructuring. In the scope of this work we therefore demonstrate the feasibility of μ-blistering to obtain aspect ratios for free standing structures of up to 7 within a process cycle time of <4 min. The presented processing technology uniquely combines manufacturing of macro-, micro- and even nanoscopic feature sizes in a single process.     

Dehydrogenation of Light Alkanes Over Rhenium Catalysts on Conventional and Mesoporous MFI Supports

Recently, Re/HZSM-5 (Si/Al = 15) was shown to be an efficient catalyst for ethane dehydrogenation and aromatization at 823 K and atmospheric pressure. In this reaction, the major initial products were benzene, toluene and xylene (BTX), but increasing amounts of ethene were produced with time on stream due to deactivation of the catalyst. We show that by use of rhenium impregnated MFI supports with very few or no acidic sites (Si/Al > 500), highly selective ethane dehydrogenation catalysts are obtained with ethene selectivities of 98%. By use of mesoporous MFI supports (Si/Al >500) the lifetime of the catalyst appears to be slightly improved compared to conventional MFI crystals. The beneficial effect of a mesoporous MFI support is convincingly demonstrated in propane dehydrogenation, where both conversion and selectivities on the mesoporous MFI (Si/Al > 500) impregnated with Re are significantly higher than on Re supported on a comparable conventional MFI support.     

Mandibular gland secretions of the male beewolvesPhilanthus crabroniformis,P. barbatus,andP. pulcher (Hymenoptera: Sphecidae)

The composition of the territorial marking pheromones from mandibular glands of males of the beewolvesPhilanthus crabroniformis, P. barbatus, andP. pulcher have been determined. The structures of the components were elucidated by gas chromatography-mass spectrometry and gas chromatography-Fourier transform infrared spectroscopy. The major compound ofP. crabroniformis is isopropyl tetradecanoate, with somewhat lesser amounts of 2-tridecanone, 3-methyl-3-butenyl tetradecanoate, and 928 (Z)(E)-11-eicosen-1-ol. The major compounds ofP. barbatus are ethyl tetradecanoate and hexadecanal, which are present in approximately a 6040 ratio. These two compounds comprise over 95% of the neutral lipids. Also present in lesser amounts are ethyl dodecanoate, tetradecanal, hexadecan-1-ol, a ^x -octadecen-1-ol, and octadecan-1-ol. The major compounds ofP. pulcher are ethyl (Z)-7-hexadecenoate and geranylgeraniol acetate, which comprise nearly 90% of the neutral lipid fraction, with smaller amounts of tetradecanal, pentadecanal, and ethyl hexadecanoate; trace amounts of ^x hexadecenal, hexadecanal, and octadecanal are also present.     

Heterogeneously assisted oxidation of adsorbates from carbonmonoxide, methanol and ethanol by hydrogen peroxide solutions on platinum electrodes in sulphuric acid

The influence of hydrogen peroxide on the adsorption and oxidation of carbon monoxide, methanol and ethanol adlayers on porous Pt electrodes were studied in 2 M sulphuric acid solution by means of cyclic voltammetry and differential electrochemical mass spectrometry (DEMS). The oxidation of adsorbed species is observed at electrode potentials far less negative than those required for electrochemical adsorbate oxidation. The oxidation by H₂O₂ is dependent on its concentration in solution, as well as on the adsorbates and their coverages. In all cases the isolated adlayers are oxidised by dissolved H₂O₂. However, the presence of H₂O₂ during adsorption partially inhibits adlayer formation from CH₃OH and C₂H₅OH, but avoids almost completely the adsorption of carbon monoxide. The removal of the residues from the surface by dissolved hydrogen peroxide probably occurs through O_ad species formed during the heterogeneous decomposition reaction of H₂O₂ on Pt.     

Sludge Pre-Treatment through Ozone Application: Alternative Sludge Reuse Possibilities for Recirculating Aquaculture System Optimization

Recirculating Aquaculture Systems (RAS) reduce water consumption by efficient filtration to maintain appropriate levels of accumulating compounds and sludge. Sludge is mechanically separated by drum filters and disposed of to the detriment of overall system water budgets. Dissolved nitrogen compounds are reduced via nitrification–denitrification filters, requiring commercial external carbon sources. The reuse of sludge after ozone pre-treatment may represent the next step in RAS optimization. The present study analyzes the content of sludge from RAS and tests ozonation as a pre-treatment for recycling as carbon source. The dissociative effect of ozone and the physicochemical changes due to ozonation lead to a significant increase in soluble carbon availability. Predominantly long-chain fatty acid (FA) (saturated and unsaturated) with 16 and 18 carbon atoms independently of the treatment were found in the profiles. Saturated FA concentrations in solution increased after 20, 40, and 60 min ozonation. The solid content of the sludge was practically unaffected by ozonation in terms of FA profile: only saturated FA slightly increases after 40 min treatment. The implications of these findings for denitrifying bacteria are discussed.

Abbreviations: Recirculating Aquaculture Systems (RAS); Advanced Oxidation Processes (AOPs)     

Solubility of Propane in Sulpholane at Elevated Pressures

The solubility of propane in sulpholane has been determined at temperatures in the range 298‐403 K at pressures up to 17.6 MPa. The experimental results were correlated by the Peng‐Robinson equation of state, and binary interaction parameters have been obtained for this system. The parameters in the Krichevsky‐Ilinskaya equation were calculated from these interaction parameters.     

Compatibilization of polymer blends from poly(styrene‐co‐acrylonitrile) and polycarbonate by oxazoline modification of poly(styrene‐co‐acrylonitrile) in the melt

A good way of achieving compatibility in polymer blends of poly(styrene‐co‐acrylonitrile) (S/AN) and bisphenol A polycarbonate (PC) is the chemical modification of S/AN in the melt. A catalyzed reaction of the nitrile groups with a substituted 2‐amino alcohol or 2‐amino phenol resulted in a conversion of nitrile groups of 55–75% in 60 min. The introduced heterocyclic structures were ethyl hydroxymethyl oxazoline (EHMOXA) and benzoxazole (BenzOXA), respectively. The use of dibutyltin oxide as a catalyst led to the highest efficiency. The modified polymer was characterized by Fourier transform infrared and NMR spectroscopy, elemental analysis, and reactions with organic acids and anhydrides. The modified S/AN showed good technical compatibility (single glass‐transition temperature) with PC in blends made from solution and from the melt. All blends were characterized with oscillating rheometry and differential scanning calorimetry. Rheological measurements showed that EHMOXA–S/AN reacted with PC and had crosslinked structures, whereas BenzOXA–S/AN showed compatibilization without any (crosslinking) reaction. The melt blends of BenzOXA–S/AN and PC showed a downward shift in the complex viscosity due to the influence of the BenzOXA group. © 2003 Wiley Periodicals, Inc. J Appl Polym Sci 90: 2322–2332, 2003