Experimental study of the gravity effect on the distribution of refrigerant flow in a multi-pass condenser

Gravity in multi-pass condensers affects the refrigerant flow rate distribution, owing to the gravitational pressure drop that occurs mainly in the U-bend tubes in fin and tube condensers with horizontal tubes. This effect was studied using an experimental approach. A condenser with two ‘nU’ circuits was selected, and the temperature variation of the refrigerant side was measured and compared along each circuit. The critical air velocity, which indicated the initiation of the gravity effect, was found for a given refrigerant flow rate. As the air velocity increased beyond the critical air velocity, the gravity effect (or mal-distribution of the refrigerant flow) developed further. Similarly, the critical refrigerant flow rate was also determined for a given air velocity. As the refrigerant flow rate decreased below the critical refrigerant flow rate, the gravity effect also developed further. The gravity-affected region was shown in the table with rows of air velocities and columns of refrigerant flow rates, and expressed using a single parameter for a given refrigerant flow circuit.     

Structural and electrochemical properties of vanadium oxide thin films grown by d.c. and r.f. reactive sputtering at room temperature

Vanadium oxide thin films were grown at room temperature by direct current and radio-frequency reactive sputtering systems to compare the structural and electrochemical properties. Rutherford backscattering spectrometry and Fourier transform infrared measurements reveal that the composition of the as-deposited films consists of the V₂O₅ phase regardless of the deposition methods. Wide-angle X-ray diffraction measurements show that the crystallinity of the as-deposited V₂O₅ films is different depending on the deposition method. Films deposited by direct current reactive sputtering were amorphous, whereas films deposited by radio-frequency reactive sputtering were crystalline. Scanning electron microscopy measurements show that the V₂O₅ films grown by radio-frequency reactive sputtering had a large grain size but the films grown by direct current reactive sputtering were amorphous. Charge–discharge measurements taken at room temperature with a constant current clearly indicate that the films grown by direct current sputtering demonstrated typical amorphous behavior, whereas the V₂O₅ films grown by radio-frequency sputtering demonstrated the discharge behavior of crystalline V₂O₅. The origin of the structural and electrochemical properties of film grown by radio-frequency reactive sputtering is a self-bias effect. The self-bias effect induces ion bombardment during the growth of vanadium oxide thin film. These results suggest that direct current reactive sputtering is more desirable for growing amorphous V₂O₅ thin film than radio-frequency reactive sputtering.     

Wave Propagation and Mode Localization in Simply Supported Multispan Beams with Couplers on Supports

The influences of couplers on wave propagation and mode localization in simply supported multispan beams with couplers consisting of lumped rotational stiffness and mass on supports are studied. A transfer matrix equation governing the vibrational wave propagation in the simply supported multispan beams with couplers is newly derived and simplified. The eigenvalue of the simplified transfer matrix shows that the larger stiffness or the larger mass of the coupler makes the internal coupling between spans weaker and so it makes the system more sensitive to mode localization. As the wave frequency or the eigenvalues of the system increases, the mass effect is increased while the stiffness effect is decreased. In a case considering the large stiffness and mass at the same time, there is a region with relatively wider passbands and narrower stop bands having small attenuation rates and the normal modes in it become delocalized ones. As an example structure, a simply supported two span beam with a coupler at the midspan is considered.     

Influences of the dynamic strain aging on the J–R fracture characteristics of the ferritic steels for reactor coolant piping system

The leak-before-break (LBB) design of the piping system for nuclear power plants has been based on the premise that the leakage due to the through-wall crack can be detected by using leak detection systems before a catastrophic break. The piping materials are required to have excellent J–R fracture characteristics. However, where ferritic steels for reactor coolant piping systems operate at the temperatures where dynamic strain aging (DSA) could occur, the fracture resistance could be reduced with the influence of DSA under dynamic loading. Therefore, in order to apply the LBB design concept to the piping system under seismic loading, both static and dynamic J–R characteristics must be evaluated.Materials used in this study are SA516 Gr.70 for the elbow pipe and SA508 Cl.1a for the main pipe and their welding joints. The crack extension during the dynamic and the static J–R tests was measured by the direct current potential drop (DCPD) and the compliance method, respectively. This paper describes the influences of the dynamic strain aging on the J–R fracture characteristics with the loading rate of the pipe materials and their welding joints.     

Temperature Induces Self-assembly of Silicon Nano/Micro-structure based on Multi-physics Approach

A three-dimensional dynamic model for nano/micro-fabrications of silicon was presented. With the developed model, the fabrication process of silicon on nothing (SON) structure was quantitatively investigated. We employ a diffuse interface model that incorporates the mechanism of surface diffusion. The mechanism of the fabrication is systematically integrated for high reliability of computational analysis. A semi-implicit Fourier spectral scheme is applied for high efficiency and numerical stability. Moreover, the theoretical analysis provides the guidance that is ordered by the fundamental geometrical design parameters to guide different fabrications of SON structures. The performed simulations suggest a substantial potential of the presented model for a reliable design technology of nano/micro-fabrications.     

Procedural Synthesis using Vortex Particle Method for Fluid Simulation

We propose a fast and effective technique to improve sub‐grid visual details of the grid based fluid simulation. Our method procedurally synthesizes the flow fields coming from the incompressible Navier‐Stokes solver and the vorticity fields generated by vortex particle method for sub‐grid turbulence. We are able to efficiently animate smoke which is highly turbulent and swirling with small scale details. Since this technique does not solve the linear system in high‐resolution grids, it can perform fluid simulation more rapidly. We can easily estimate the influence of turbulent and swirling effect to the fluid flow.     

Chemical Processing of Nanostructured Cemented Carbide

Chemical processing is becoming a vital component in the economic development of advanced engineering materials. Our research group on chemical processing has been focussed on the development of process to produce nanophase cemented carbide. It is a much more direct route for making WC/Co than traditional processing methods, and offers the potential for lower cost production of novel materials with homogeneous nanophase microstructures and improved properties. This paper addresses the scientific and technical issues relating to the chemical processing of nanophase WC/Co composite powder and their sintering.     

Direct vapor phase growth process and robust photoluminescence properties of large area MoS2 layers

There has been growing research interest in the use of molybdenum disulfide in the fields of optoelectronics and energy harvesting devices, by virtue of its indirect-to-direct band gap tunability. However, obtaining large area thin films of MoS2 for future device applications still remains a challenge. In the present study, the amounts of the precursors （S and MOO3） were varied systematically in order to optimize the growth of highly crystalline and large area MoS2 layers by the chemical vapor deposition method. Careful control of the amounts of precursors was found to the key factor in the synthesis of large area highly crystalline flakes. The thickness of the layers was confirmed by Raman spectroscopy and atomic force microscopy. The optical properties and chemical composition were studied by photoluminescence （PL） and X-ray photoelectron spectroscopy. The emergence of strong direct excitonic emissions at 1.82 eV （A-exciton, with a normalized PL intensity of -55 × 10^3） and 1.98 eV （B-exciton, with a normalized PL intensity of -5 × 10^3） of the sample at room temperature clearly indicates the high luminescence quantum efficiency. The mobility of the films was found to be 0.09 cm^2/（V.s） at room temperature. This study provides a method for the controlled synthesis of high-quality two-dimensional （2D） transition metal dichalcogenide materials, useful for applications in nanodevices, optoelectronics and solar energv conversion.     

A study on the factors that affect the adoption of Smart Water Grid

Due to recent climate changes that accompany drastic changes in water recycle process, extreme floods and droughts are occurring frequently throughout the world. In response to these events, Smart Water Management that refers to implement intelligent water information systems by IT convergence is considered as a new paradigm. In this study, we seek to explore the Smart Water Management, especially the adoption of Smart Water Grid Technology. We aim to review previous studies to identify factors that influence the adoption of the Smart Water Grid and to analyze the importance and priority of the factors affecting Smart Water Grid adoption, thereby presenting the successful adoption measures for Smart Water Grid in Korea. This study set a research model with the influencing factors in relation to the adoption of new IT technologies that were identified through the literature reviews of previous studies based on the TOE framework. This study also conducted empirical analysis of the findings and found out that the issue of privacy protection and security due to hacker’s attack would be emerged as a significant risk factor.