Modern Template Design and Biological Evaluation of Cephradine-loaded Magnesium Calcium Silicate Nanocomposites as an Inhibitor for Nosocomial Bacteria in Biomedical Applications

Silicon - Magnesium calcium silicate nanostructures (MCSNS) loaded with (0.0, 0.6, 0.9, and 1.2 wt%) of Cephradine-drug consisting of mesoporous particles were functionally prepared by sol-gel...     

A comparison of swarm-based optimization algorithms in linear antenna array synthesis

Today, the design of antenna arrays is very important in providing effective and efficient wireless communication. The purpose of antenna array synthesis is to obtain a radiation pattern with a low side lobe level (SLL) at a desired half power beam width in far-field. The amplitude and position values of the array elements can be optimized to obtain a radiation pattern with suppressed SLLs. In this paper, swarm-based metaheuristic algorithms including particle swarm optimization (PSO), artificial bee colony (ABC), mayfly algorithm (MA) and jellyfish search (JS) are compared to determine the optimal design of linear antenna arrays. Extensive experiments are conducted on designing 10-, 16-, 24- and 32-element linear arrays by determining the amplitude and positions. Experiments are repeated 30 times due to the random nature of swarm-based optimizers, and statistical results show that the performance of the novel algorithms, MA and JS, is better than that of the well-known PSO and ABC methods.

     

Synthesis and characterization of caprolactone based polyurethane with degradable and antifouling performance

In this work,a degradable polyurethane composed of caprolactone(CL)and L-Lactide(LLA)as soft seg-ments,and 4,4'-methylenebis(cyclohexyl isocyanate)(H12MDI)and polytetramethylene ether glycol(PTMEG)as hard segments,was prepared.Hydrolytic degradation experiment revealed that the degrad-able polyurethane(PU)could be degraded in artificial seawater.It also showed that caprolactone-co-polyurethane(CL-PU)copolymer with higher crystallinity degraded much slower in artificial seawater.However,the introduction of LLA resulted in an increase in the hydrophilicity and reduction in the crys-tallinity of degradable PU,as demonstrated by the contact angle analysis.The result of the scanning elec-tron microscope showed that the surface of degradable PU renewed under static condition.Moreover,degradable PU was able to be used as a carrier,and it controlled the release rate of 4,5-dichloro-2-octyl-isothiazolone(DCOIT).The anti-diatom(Navicula incerta)test demonstrated that the(caprolactone-co-L-lactide)-co-polyurethane 4(CL/LAx-PU4)with DCOIT contents prevented the adhe-sion of diatom Navicula incerta(88.37％reduction)due to their self-polishing and the release of antifou-lants.Therefore,the degradable PU consisted of CL,LLA,and DCOIT could be a durable resin with good antifouling activity for the application in the marine anti-biofouling field.     

Catalase (CAT) Gene Family in Rapeseed (Brassica napus L.): Genome-Wide Analysis,Identification, and Expression Pattern in Response to Multiple Hormones and Abiotic Stress Conditions

Catalase (CAT) is an antioxidant enzyme expressed by the CAT gene family and exists in almost all aerobic organisms. Environmental stresses induce the generation of reactive oxygen species (ROS) that eventually hinder plant growth and development. The CAT enzyme translates the hydrogen peroxide (H₂O₂) to water (H₂O) and reduce the ROS levels to shelter the cells’ death. So far, the CAT gene family has not been reported in rapeseed (Brassica napus L.). Therefore, a genome-wide comprehensive analysis was conducted to classify the CAT genes in the rapeseed genome. The current study identified 14 BnCAT genes in the rapeseed genome. Based on phylogenetic and synteny analysis, the BnCATs belong to four groups (Groups I–IV). A gene structure and conserved motif analysis showed that Group I, Group II, and Group IV possess almost the same intron/exon pattern, and an equal number of motifs, while Group III contains diverse structures and contain 15 motifs. By analyzing the cis-elements in the promoters, we identified five hormone-correlated responsive elements and four stress-related responsive elements. Further, six putative bna-miRNAs were also identified, targeting three genes (BnCAT4, BnCAT6, and BnCAT8). Gene ontology (GO) enrichment analysis showed that the BnCAT genes were largely related to cellular organelles, ROS response, stimulus response, stress response, and antioxidant enzymes. Almost 10 BnCAT genes showed higher expression levels in different tissues, i.e., root, leaf, stem, and silique. The expression analysis showed that BnCAT1–BnCAT3 and BnCAT11–BnCAT13 were significantly upregulated by cold, salinity, abscisic acid (ABA), and gibberellic acid (GA) treatment, but not by drought and methyl jasmonate (MeJA). Notably, most of the genes were upregulated by waterlogging stress, except BnCAT6, BnCAT9, and BnCAT10. Our results opened new windows for future investigations and provided insights into the CAT family genes in rapeseed.     

The Evolving Role of Fetuin-A in Nonalcoholic Fatty Liver Disease: An Overview from Liver to the Heart

Nonalcoholic fatty liver disease (NAFLD) is strongly associated to the features of metabolic syndrome which can progress to cirrhosis, liver failure and hepatocellular carcinoma. However, the most common cause of mortality in people with NAFLD is not liver-related but stems from atherosclerotic cardiovascular disease (CVD). The prevalence of NAFLD is on the rise, mainly as a consequence of its close association with two major worldwide epidemics, obesity and type 2 diabetes (T2D). The exact pathogenesis of NAFLD and especially the mechanisms leading to disease progression and CVD have not been completely elucidated. Human fetuin-A (alpha-2-Heremans Schmid glycoprotein), a glycoprotein produced by the liver and abundantly secreted into the circulation appears to play a role in insulin resistance, metabolic syndrome and inflammation. This review discusses the links between NAFLD and CVD by specifically focusing on fetuin-A’s function in the pathogenesis of NAFLD and atherosclerotic CVD.     

A new application of Hydroxyapatite extracted from dromedary bone: Adsorptive removal of Congo red from aqueous solution

The aim of this paper is to evaluate the efficiency of the natural hydroxyapatite powder for anionic dye (Congo red) elimination from water and optimization of adsorption process parameters that are contact time (0-360 min), solution pH (4-9), initial dye concentration (400-2400 mg/l), and adsorbent dosage (0.4-20 g/l). Natural hydroxyapatite with high surface area was prepared from animal agriculture waste dromedary bone. X-ray diffraction, transmission electron microscopy, transform infrared spectroscopy, and elemental analysis characterizations of the powder prepared show a hexagonal structure, the irregular form of hydroxyapatite and presence of other elements as trace element. The results of adsorption tests demonstrated the high efficiency of natural hydroxyapatite for removal of Congo red from water solution whose maximum experimental capacity adsorption of Congo red by natural hydroxyapatite is 900 mg/g at pH 4.5, equilibrium time 240 min and adsorbent dosage 2 g/l. According to the correlation coefficient value, the pseudo-second order kinetic model identified the sorption mechanism of pollutant used on natural hydroxyapatite. The Freundlich isotherm is the best representative theoretical model of the dye molecules’ adsorption on the natural hydroxyapatite support.     

A potential trackable bone filler: Preparation and characterization

This study reported the synthesis of fluorescent hydroxyapatite/alginate/carbon quantum dots (HA/Alg/CQDs) nanocomposites via the co-precipitation technique. The N-doped CQDs as a new class of fluorescent materials were prepared by the citric acid pyrolysis method, with an average size around 4 nm. Physical, chemical, and optical properties of the synthesized nanocomposites were investigated by X-ray diffraction (XRD), Fourier-transformed infrared spectroscopy (FTIR), atomic force microscopy (AFM), field-emission scanning electron microscopy (FESEM), UV–visible spectroscopy, and photoluminescence (PL) spectroscopy, respectively. The PL spectroscopy data verified the favorable in vitro luminescent emission of the HA/Alg/CQDs nanocomposites in comparison with HA/Alg and HA samples. The XRD patterns of the prepared samples confirmed the formation of crystalline HA in all composites, possessing a Ca/P ratio around 1.5 as obtained by EDX elemental analysis. The FESEM analysis exhibited HA nanoplates that homogeneously distributed throughout the alginate matrix. Therefore, the synthesized nanocomposites could be regarded as potential trackable drug carriers for hard tissue engineering applications.     

智能打壳装置

在一台HAL 2 3 0电解槽上安装了 5个带有节能系统 (EnergySavingSystem)的汽缸和一个可用于快速测试寿命的“虚拟”ESS汽缸。测试的目的是使用ESS系统在正常操作中估计空气节省量和证明包括ESS系统在内的打壳装置的预期寿命周期能达到 8年。测试表明ESS系统的预期寿命超过 8年 ,与传统系统相比 ,可节省 5 9%的空气。如果全部使用该系统 ,可节省 65 %的能量。     

Defect classification using a new feature for pulsed eddy current sensors

The objective of this study is to identify defects such as surface cracks, subsurface defects and metal losses using feature based pulsed eddy current sensors. A new feature, termed as the rising point, related to the propagation time of electromagnetic waves in metallic targets is proposed for defect classification. Experimental studies of the validation, robustness of the new feature of rising time are reported. In addition to other features, defects can be detected and quantified robustly and lift-off can also be derived from the rising time. Conclusion and further work are derived on the basis of the findings.     

On the role of hydrophilicity and hydrophobicity in aqueous heterophase polymerization

This paper reports on experimental results of aqueous heterophase polymerizations with monomers of quite different solubility in water ranging from the water-soluble 2-hydroxyethyl methacrylate to lauryl methacrylate with solubility in water of only about 10⁻⁴ mM. A calorimetric study revealed the strong influence of both the hydrophilicity of the monomer and the stirrer speed on the rate of polymerization in the absence of surfactants. In order to obtain maximum latex yield and high efficiency (which is a measure considering colloidal properties, polymerization recipe, and polymerization parameters) the initiator-surfactant combination must be properly chosen in dependence on the hydrophilicity of the monomer. Results are presented for sodium alkyl sulfates or disodium-N-stearoyl-l-glutamate as surfactant and potassium peroxodisulfate, or poly(ethylene glycol)-azo- compounds, or 2,2′-azobis(N-2′-methylpropanoyl-2-amino-alkyl-1)-sulfonates as initiators.