Broadband infrared fluorescence in Er-doped BaO–SiO2 glasses

Er³⁺-doped SiO₂ glasses with or without BaO were fabricated by containerless processing. Scanning electron microscope observations and the scan profiles of electron-probe microanalysis demonstrated that the Ba-silicate glass was homogeneous and no aggregation of Er³⁺ ions occurred. The infrared fluorescence at around 1.55 μm from Er³⁺ in the Ba-silicate glass excited by a 980-nm laser was broader and its lifetime was longer than that of the silica glass, indicating the difference in the local structures around Er³⁺ ions between the Ba-silicate and silica glasses; this was supported by Raman scattering measurements. These results demonstrated that the Ba-silicate-glass system might be a new candidate for a host glass for Er³⁺-doped fiber amplifiers.     

Effects of calcining conditions of kaolinite on pore structures of mesoporous materials prepared by the selective leaching of calcined kaolinite

This paper describes the effects of calcining conditions of kaolinite on pore structures of the porous materials obtained from the selective leaching of calcined kaolinite using KOH solution. Mesoporous -Al₂O₃ was the predominant crystalline phase in the samples calcined in the temperature range between 950°C and 1050°C for 24 h. The mean specific surface area of these samples was approximately 250 m² · g^–1 and the mean total pore volume was approximately 0.8 ml · g^–1. The pore size distribution curves of these samples showed a sharp peak at around 2–3 nm pore radius. This peak was sharper for the sample calcined at 1000°C for 24 h. On the other hand, the pore sizes of the sample calcined at 1100°C for 24 h increased abruptly to 10–20 nm and this change corresponded to the formation of mullite in the sample. The pore sizes of the samples calcined at 1100°C varied with calcining time. The specific surface area and total pore volume decreased, the longer the calcining time of the samples, and this was correlated with an increase in the amount of mullite in the samples.     

Chemical and electrochemical preparation of poly(9,10-dihydrophenanthrene-2,7-diyl) using nickel complexes and electrochemical properties of the polymer

Summary Dehalogenation polycondensations of 2,7-dibromo-9,10-dihydrophenanthrene with isolated zero-valent nickel complex and electrochemically generated zero-valent nickel complex afford -conjugated poly(9,10-dihydrophenanthrene-2,7-diyl). The electrochemically synthesized polymer is obtained as a thin film on electrode, and shows a reversible electrochemically doping-undoping cycle in an oxidation region. The polymer has essentially the same -conjugation system as that of poly(p-phenylene).     

Abnormal metabolism of polyunsaturated fatty acids and phospholipids in diabetic glomeruli

Studies were done on changes in phospholipid content and fatty acid composition of phospholipids and on the role of the acylation pathway in synthesis of phospholipids in the development of abnormal fatty acid composition in the glomeruli of rats 2 and 10 mo after induction of diabetes with streptozotocin. The proportions of individual phospholipids in the glomeruli of rats were not changed 2 mo after induction of diabetes, but the proportion of phosphatidylethanolamine (PE) decreased and that of sphingomyelin increased 10 mo after induction of diabetes. In contrast, in liver the proportion of PE was increased and that of phosphatidylcholine was decreased. These results showed that changes of individual phospholipids in glomeruli were time-dependent and tissue-specific. Two mo after induction of diabetes, the main change in the phospholipid fatty acid composition of diabetic glomeruli was a decrease in arachidonic acid (AA); the main change in serum free fatty acids (FFA) was an increase in linoleic acid (LA) and a decrease in AA. Ten mo after induction of diabetes, the main changes in the phospholipid fatty acid composition of glomeruli were an increase in LA and a decrease in AA; the main change of the serum FFA composition was a decrease in AA. Thus, the fatty acid composition of glomerular phospholipids was not directly correlated to that of the serum in diabetic rats. Acyl-CoA synthetase and acyltransferase activities increased in diabetic glomeruli with either AA or LA as substrate, but activity toward LA increased more at 2 mo after induction of diabetes. Acyl-CoA synthetase activity increased in diabetic glomeruli with LA as substrate, but that did not change with AA as substrate at 10 mo after induction of diabetes. Furthermore, acyltransferase activity decreased in diabetic glomeruli with AA as substrate, although that did not change with LA as substrate at 10 mo after induction of diabetes.     

Eletrical Conductivity of Antimony-Doped Tin Dioxide Prepared by Hot Isostatic Pressing

High-purity and high-density tin dioxide doped with 1 × 10²⁰/cm³ antimony was prepared by hot isostatic pressing, and its electrical conductivity was measured over the temperature range 20° to 1200°C in various atmospheres. The conductivity decreased with increasing temperature and reached the value found in specimens normally sintered under the same conditions at normal pressure. The effect of microstructure on the carrier transport is discussed. Grain boundaries only slightly affect carrier transport at high temperatures.     

Corrosion behavior of Fe-20Cr and Ni-20Cr alloys in Ar-H2O-HBr gas mixtures at 1000 K

Discontinuous mass-change measurements and corrosion-product analyses were made for Fe-20Cr and Ni-20Cr alloys after exposing them to Ar-H ₂ O-HBr gas mixtures at 1000 K for 24 hours. Predominantly chromia scales formed on both alloys. Upon cooling, the scales remained adherent to the Fe-20Cr alloy but spalled extensively from Ni-20Cr samples. After tests in HBr-rich gas mixtures, bromine-rich corrosion products were found underneath chromia scales on both alloys while nickel evaporation was observed from Ni-20Cr samples. Preoxidation of the Ni-20Cr alloy prior to exposure to Ar-H ₂ O-HBr gas mixtures increased chromia scale adherence but did not prevent nickel loss from the alloy. Chromia scales formed on the Fe-20Cr alloy were more protective due to the absence of iron oxides in the scale. Large NiO crystals formed over the Ni-20Cr alloy decreased chromia-scale adherence and increased nickel loss from the alloy due to the low stability of NiO in HBr-containing gas mixtures.     

Transparent Hydroxyapatite Prepared by Hot Isostatic Pressing of Filter Cake

Hydroxyapatite powder was synthesized and formed into a compact in an aqueous medium using a filter-cake method. The compact was hot isostatically pressed at 700° to 1000°C and 100 MPa for 2 h. Fully dense, transparent materials were obtained above 800°C. Both forming and densification methods were found to be important in obtaining transparent materials.     

Phase equilibria in TiB2-reinforced high modulus steel

An application of thermodynamic calculations to the phase equilibria in TiB₂-reinforced high modulus steel (HMS) is described. Titanium diboride (TiB₂) has been verified as the best reinforcement for improving isotropic Young’s modulus of steels. The TiB₂ particles can be synthesized in-situ in a ferrite matrix using a combination of ferrotitanium and ferroboron powders. The calculations reveal that impurities, such as oxygen, could promote the iron boride (Fe₂B) formation in a Fe-TiB₂ pseudobinary system, especially for the HMS processed through this powder metallurgical technique. Modification of the steel matrix of HMS by an addition of ferrite formers is encouraged based on the calculated (Fe-TiB₂)-X diagrams that show no significant change in the stability of TiB₂. In the development of HMS with an Fe-Cr matrix, the phase constitution was predicted successfully, and the highest Young’s modulus is reached with a proper control of titanium content.