In vitro mesenchymal stem cell responses on laser-welded NiTi alloy

The biocompatibility of NiTi after laser welding was studied by examining the in vitro (mesenchymal stem cell) MSC responses at different sets of time varying from early (4 to 12 h) to intermediate phases (1 and 4 days) of cell culture. The effects of physical (surface roughness and topography) and chemical (surface Ti/Ni ratio) changes as a consequence of laser welding in different regions (WZ, HAZ, and BM) on the cell morphology and cell coverage were studied. The results in this research indicated that the morphology of MSCs was affected primarily by the topographical factors in the WZ: the well-defined and directional dendritic pattern and the presence of deeper grooves. The morphology of MSCs was not significantly modulated by surface roughness. Despite the possible initial Ni release in the medium during the cell culture, no toxic effect seemed to cause to MSCs as evidenced by the success of adhesion and spreading of the cells onto different regions in the laser weldment. The good biocompatibility of the NiTi laser weldment has been firstly reported in this study.     

Control of a robotic orthosis for gait rehabilitation

Robot assisted gait training may help in producing rapid improvements in functional gait parameters. This paper presents new experimental results with an intrinsically compliant robotic gait training orthosis. The newly developed robotic orthosis has 6 degrees of freedom (DOFs). A trajectory tracking controller based on the boundary layer augmented sliding control (BASMC) law was implemented to guide the subject’s limbs on physiological gait trajectories. The compliance of the robotic orthosis sagittal plane hip and knee joints was also controlled, independently of the trajectory tracking control. The robotic orthosis and the control scheme were evaluated on three neurologically intact subjects walking on a treadmill. A maximum trajectory tracking error of 10° was recorded at the hip and knee sagittal plane joints. The results showed that subjects can walk in the robotic orthosis with comfort and the BASMC law was able to guide the subject’s limbs on reference physiological trajectories.     

Forecasting hydrogen production potential in islamabad from solar energy using water electrolysis

The focus of this study is the use of Machine Learning methods to forecast Solar Hydrogen production potential for the Islamabad region of Pakistan. For this purpose, we chose a Photovoltaic-Electrolytic (PV-E) system to forecast electricity and, hence, hydrogen production. The weather data used for forecasting and simulation were recorded with precise meteorological instruments stationed in Islamabad, over the course of 13 and a half months. Out of the three tested algorithms, Prophet performs the best with Mean Absolute Percentage Error of 3.7%, forecasting a daily average Hydrogen production of 93.3 × 10³ kg/Km². Although, the forecast in this study is made for the month of August and September, during which the local season moves towards winter, this study demonstrates solar hydrogen production, as a green energy source, has a tremendous potential in this region.     

Rice-like CuO nanostructures for sensitive electrochemical sensing of hydrazine

In this work, a low temperature aqueous chemical growth methodology was used for the fabrication of CuO nanostructures. The as-synthesised nanostructures were then elaborately characterised by number of analytical techniques such as scanning electron microscopy (SEM) and X-ray powder diffraction (XRD). The obtained nanostructures were observed to possess interlaced rice-shaped structural features with the length and width of individual rice determined to be in the range of 200–300 nm and 50–100 nm respectively. The unique nanostructures when utilised as electrode material exhibited excellent electro-catalytic potential towards oxidation of hydrazine in alkaline media. The excellent conductive of CuO added by the high surface area of obtained nanorice-like structures enabled development of highly sensitive (3087 µA mM⁻¹ cm⁻²), selective and stable electrochemical sensor for hydrazine. In addition, the successfully application of the developed sensor in spiked tap, bottled and industrial water samples for the detection of hydrazine suggested its feasibility for practical environmental application.

     

Banana peel: an effective biosorbent for aflatoxins

This work reports the application of banana peel as a novel bioadsorbent for in vitro removal of five mycotoxins (aflatoxins (AFB1, AFB2, AFG1, AFG2) and ochratoxin A). The effect of operational parameters including initial pH, adsorbent dose, contact time and temperature were studied in batch adsorption experiments. Scanning electron microscopy (SEM), Fourier transform infrared spectroscopy (FTIR) and point of zero charge (pH_pzc) analysis were used to characterise the adsorbent material. Aflatoxins’ adsorption equilibrium was achieved in 15 min, with highest adsorption at alkaline pH (6–8), while ochratoxin has not shown any significant adsorption due to surface charge repulsion. The experimental equilibrium data were tested by Langmuir, Freundlich and Hill isotherms. The Langmuir isotherm was found to be the best fitted model for aflatoxins, and the maximum monolayer coverage (Q₀) was determined to be 8.4, 9.5, 0.4 and 1.1 ng mg^?1 for AFB1, AFB2, AFG1 and AFG2 respectively. Thermodynamic parameters including changes in free energy (ΔG), enthalpy (ΔH) and entropy (ΔS) were determined for the four aflatoxins. Free energy change and enthalpy change demonstrated that the adsorption process was exothermic and spontaneous. Adsorption and desorption study at different pH further demonstrated that the sorption of toxins was strong enough to sustain pH changes that would be experienced in the gastrointestinal tract. This study suggests that biosorption of aflatoxins by dried banana peel may be an effective low-cost decontamination method for incorporation in animal feed diets.     

Effect of Varying Amount of Polyethylene Glycol (PEG-600) and 3-Aminopropyltriethoxysilane on the Properties of Chitosan based Reverse Osmosis Membranes

Chitosan and polyethylene glycol (PEG-600) membranes were synthesized and crosslinked with 3-aminopropyltriethoxysilane (APTES). The main purpose of this research work is to synthesize RO membranes which can be used to provide desalinated water for drinking, industrial and agricultural purposes. Hydrogen bonding between chitosan and PEG was confirmed by displacement of the hydroxyl absorption peak at 3237 cm⁻¹ in pure chitosan to lower values in crosslinked membranes by using FTIR. Dynamic mechanical analysis revealed that PEG lowers Tg of the modified membranes vs. pure chitosan from 128.5 °C in control to 120 °C in CS-PEG5. SEM results highlighted porous and anisotropic structure of crosslinked membranes. As the amount of PEG was increased, hydrophilicity of membranes was increased and water absorption increased up to a maximum of 67.34%. Permeation data showed that flux and salt rejection value of the modified membranes was increased up to a maximum of 80% and 40.4%, respectively. Modified films have antibacterial properties against Escherichia coli as compared to control membranes.     

A review of hashing based image authentication techniques

Multimedia Tools and Applications - In the recent digitization era, image hashing is a key technology, including image recognition, authentication and manipulation detection, among many multimedia...     

Thin-film iron-oxide nanobeads as bifunctional electrocatalyst for high activity overall water splitting

Developing only Fe derived bifunctional overall water splitting electrocatalyst both for oxygen evolution reaction (OER) and hydrogen evolution reaction (HER) while performing at low onset overpotential and with high catalytic stability is a rare instance. We present here the first demonstration of unique iron-oxide nanobeads (FeO_x-NBs) based electrocatalyst executing both OER and HER with high activity. Thin-film electrocatalytic FeO_x-NBs assembly is surface grown via simple spray coating (SC). The unique SC/FeO_x-NBs propels OER initiating water oxidation just at 1.49 V_RHE (η = 260 mV) that is the lowest observable onset potential for OER on simple Fe-oxide based catalytic films reported so far. Catalyst also reveals decently high HER activity and competent overall water splitting performance in the FeO_x-NBs two-electrode system as well. Catalyst also presents stable kinetics, with promising high electrochemically active surface area (ECSA) of 1765 cm², notable Tafel slopes of just 54 mV dec^1? (OER) and 85 mV dec^1? (HER), high exchange current density of 1.10 mA cm^2? (OER), 0.58 mA cm^2? (HER) and TOF of 74.29s^1?@1.58V_RHE, 262s^1?@1.62V_RHE (OER) and 82.5s^1?@-0.45V_RHE, 681s^1?@-0.56V_RHE (HER).